PCA9535PWR
PCA9535PWR from Texas Instruments is a Integrated Circuit 16-bit 2.3- to 5.5-V I2C/SMBus I/O expander with interrupt & config registers - I2C & SPI general-purpose I/Os (GPIOs). INT can be connected to the interrupt input of a microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I 2 C bus. Thus, the PCA9535 can remain a simple slave device. The device outputs (latched) have high-current drive capability for directly driving LEDs. The device has low current consumption. Although pin-to-pin and I 2 C address compatible with the PCF8575, software changes are required due to the enhancements. The PCA9535 is identical to the PCA9555, except for the removal of the internal I/O pullup resistor, which greatly reduces power consumption when the I/Os are held low. Three hardware pins (A0, A1, and A2) are used to program and vary the fixed I 2 C address and allow up to eight devices to share the same I 2 C bus or SMBus. The fixed I 2 C address of the PCA9535 is the same as the PCA9555, PCF8575, PCF8575C, and PCF8574, allowing up to eight of these devices in any combination to share the same I 2 C bus or SMBus.
Base Number: PCA9535
Package: Tape & Reel or Cut Tape
Standard Package: 2,000
RoHS: ROHS3 Compliant
REACH: Unaffected
MSL: Unlimited
ECCN: EAR99
HTSUS: 8542.39.0001
Additional Details
COLOR:
STATUS: Not For New Designs
PACKAGING: Tape & Reel or Cut Tape
PER PACK: 2,000
MNF: Texas Instruments
ALT PART:
OTHER: PCA9535PWR
MSL: Unlimited
RoHS: ROHS3 Compliant
REACH: Unaffected
HTSUS: 8542.39.0001
ECCN: EAR99