SN74ABT16501DLR
SN74ABT16501DLR from Texas Instruments is a Integrated Circuit 18-bit universal bus transceivers with 3-state outputs - General-purpose transceivers. These 18-bit universal bus transceivers consist of storage elements that can operate either as D-type latches or D-type flip-flops to allow data flow in transparent or clocked modes. Data flow in each direction is controlled by output-enable (OEAB and), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. When OEAB is high, the outputs are active. When OEAB is low, the outputs are in the high-impedance state. Data flow for B to A is similar to that of A to B but uses, LEBA, and CLKBA. The output enables are complementary (OEAB is active high and is active low). To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor and should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sourcing/current-sinking capability of the driver. The SN54ABT16501 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16501 is characterized for operation from -40°C to 85°C.
Series: 74ABT
Base Number: 74ABT16501
Package: Tape & Reel or Cut Tape
Standard Package: 1,000
RoHS: ROHS3 Compliant
REACH: Unaffected
MSL: Unlimited
ECCN: EAR99
HTSUS: 8542.39.0001
Additional Details
COLOR:
STATUS: Active
PACKAGING: Tape & Reel or Cut Tape
PER PACK: 1,000
MNF: Texas Instruments
ALT PART:
OTHER: SN74ABT16501DLR
MSL: Unlimited
RoHS: ROHS3 Compliant
REACH: Unaffected
HTSUS: 8542.39.0001
ECCN: EAR99