SN74CBT16244CDLR

SN74CBT16244CDLR from Texas Instruments is a Integrated Circuit 5V, 1:1 (SPST), 16-channel FET bus switch with -2V undershoot protection and four control inputs - Protocol & bus switches & muxes. The SN74CBT16244C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (r on), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT16244C provides protection for undershoot up to -2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state. The SN74CBT16244C is organized as four 4-bit bus switches with separate output-enable (1OE, 2OE, 3OE, 4OE) inputs. It can be used as four 4-bit bus switches, two 8-bit bus switches, or as one 16-bit bus switch. When OE is low, the associated 4-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is high, the associated 4-bit bus switch is OFF, and the high-impedance state exists between the A and B ports. This device is fully specified for partial-power-down applications using I off. The I off feature ensures that damaging current will not backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Series: 74CBT
Base Number: 74CBT16244
Package: Tape & Reel or Cut Tape
Standard Package: 1,000
RoHS: ROHS3 Compliant
REACH: Unaffected
MSL: Unlimited
ECCN: EAR99
HTSUS: 8542.39.0001

Integrated Circuits (ICs) / Logic / Signal Switches, Multiplexers, Decoders