TAS5162DDV

TAS5162DDV from Texas Instruments is a Integrated Circuit 160-W stereo, 300-W mono, 0- to 52.5-V supply, PWM input Class-D audio amplifier - General-purpose audio amplifiers. The TAS5162 is a high performance, integrated stereo digital amplifier power stage with an improved protection system. The TAS5162 is capable of driving a 6- bridge-tied load (BTL) at up to 210 W per channel at THD = 10%, low integrated noise at the output, low THD+N performance without clipping, and low idle power dissipation. A low-cost, high-fidelity audio system can be built using a TI chipset, comprising a modulator (e.g., TAS5508) and the TAS5162. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. This device requires two power supplies, at 12 V for GVDD and VDD, and at 50V for PVDD. The TAS5162 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 6, which enables the use of smaller power supplies and heatsinks. The TAS5162 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5162 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients. A new programmable overcurrent detector allows the use of lower-cost inductors in the demodulation output filter.

Series: PurePath Digital™
Base Number: TAS5162
Package: Tube
Standard Package: 35
RoHS: ROHS3 Compliant
REACH: Unaffected
MSL: 168 Hours
ECCN: EAR99
HTSUS: 8542.33.0001

Integrated Circuits (ICs) / Linear / Amplifiers