TPS76850QPWPRQ1

TPS76850QPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850-Q1) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to the enable (EN) input shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active-high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx-Q1 is offered in 1.8-V, 2.5-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx-Q1 family is available in a 20-pin PWP package.

Series: Automotive, AEC-Q100
Base Number: TPS76850
Package: Tape & Reel or Cut Tape
Standard Package: 2,000
RoHS: ROHS3 Compliant
REACH: Unaffected
MSL: 168 Hours
ECCN: EAR99
HTSUS: 8542.39.0001

Integrated Circuits (ICs) / Power Management (PMIC) / Voltage Regulators - Linear