Search results for “74ABTE”

74ABT2244CPC from Fairchild Semiconductor is a IC BUFFER NON-INVERT 5.5V 20DIP

SN74ABT841ADWR from Texas Instruments is a Integrated Circuit 10-Bit Bus-Interface D-Type Latches With 3-State Outputs - D-type latches. The SN54ABT841 and SN74ABT841A 10-bit latches are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The ten transparent D-type latches provide true data at their outputs. A buffered output-enable (OE) input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect the internal operations of the latch. Previously stored data can be retained or new data can be entered while the outputs are in the high-impedance state. When V CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT841 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT841A is characterized for operation from -40°C to 85°C.

74ABT16543CMTD from Fairchild Semiconductor is a IC TXRX NON-INVERT 5.5V 56TSSOP

74ABT16646CMTD from Fairchild Semiconductor is a IC TXRX NON-INVERT 5.5V 56TSSOP

SN74ABTE16246DGGR from Texas Instruments is a IC INCIDENT-WAVE XCVR 48-TSSOP

74ABT16541CMTDX from Fairchild Semiconductor is a IC BUFF NON-INVERT 5.5V 48TSSOP

74ABT541CPC from Fairchild Semiconductor is a IC BUFFER NON-INVERT 5.5V 20DIP

74ABT241CMTCX from Fairchild Semiconductor is a IC BUFF NON-INVERT 5.5V 20TSSOP

74ABT16373CMTD from Fairchild Semiconductor is a BUS DRIVER, ABT SERIES

74ABT16501CMTD from Fairchild Semiconductor is a BUS TRANSCEIVER, ABT SERIES

74ABT377CSCX from Fairchild Semiconductor is a IC FF D-TYPE SNGL 8BIT 20SOIC

74ABT377CSC from Fairchild Semiconductor is a IC FF D-TYPE SNGL 8BIT 20SOIC

SN74ABT16373ADLRG4 from Texas Instruments is a Integrated Circuit 16-Bit Transparent D-Type Latches With 3-State Outputs - D-type latches. The 'ABT16373A are 16-bit transparent D-type latches with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. These devices can be used as two 8-bit latches or one 16-bit latch. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect internal operations of the latch. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. When V CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT16373A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16373A is characterized for operation from -40°C to 85°C.

74ABT245D,623 from NXP Semiconductors is a IC TXRX NON-INVERT 5.5V 20SO

SN74ABT16601DLR from Texas Instruments is a Integrated Circuit 18-bit universal bus transceivers with 3-state outputs - General-purpose transceivers. These 18-bit universal bus transceivers combine D-type latches and D-type flip-flops to allow data flow in transparent, latched, clocked, and clock-enabled modes. Data flow in each direction is controlled by output-enable (and), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. The clock can be controlled by the clock-enable (and) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. Output enable is active low. When is low, the outputs are active. When is high, the outputs are in the high-impedance state. Data flow for B to A is similar to that of A to B, but uses, LEBA, CLKBA, and. To ensure the high-impedance state during power up or power down, should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT16601 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT16601 is characterized for operation from -40°C to 85°C.

SN74ABT533AN from Texas Instruments is a IC OCT TRANSPARENT D 3ST 20-DIP

SN74ABT8245DW from Texas Instruments is a IC SCAN TEST DEV/TXRX 24-SOIC

74ABT16652CMTD from Fairchild Semiconductor is a IC TXRX NON-INVERT 5.5V 56TSSOP

SN74ABT2952ANT from Texas Instruments is a IC TXRX NON-INVERT 5.5V 24DIP

74ABT373CPC from Fairchild Semiconductor is a OCTAL TRANS LATCH, ABT SERIES

SN74ABT651NTE4 from Texas Instruments is a IC BUS TRANSCEIVER DUAL 24DIP

SN74ABT125N from Texas Instruments is a IC BUF NON-INVERT 5.5V 14DIP

74ABT373CSJ from Fairchild Semiconductor is a OCTAL TRANS LATCH, ABT SERIES

74ABT08N,112 from Philips is a AND GATE, ABT SERIES, 4 FUNC, 2-

SN74ABTE16246DL from Texas Instruments is a Integrated Circuit 11-Bit Incident-Wave Switching Bus Transceivers With 3-State and Open-Collector Outputs - General-purpose transceivers. The SN74ABTE16246 is an 11-bit noninverting transceiver designed for asynchronous two-way communication between buses. This device has open-collector and 3-state outputs. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. When OE is low, the device is active. The B port has an equivalent 25- series output resistor to reduce ringing. Active bus-hold inputs on the B port hold unused or floating inputs at a valid logic level. The A port provides for the precharging of the outputs via V CC BIAS, which establishes a voltage between 1.3 V and 1.7 V when V CC is not connected. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

SN74ABT244AN from Texas Instruments is a IC BUF NON-INVERT 5.5V 20DIP

74ABT373CMSA from Fairchild Semiconductor is a OCTAL TRANS LATCH, ABT SERIES

74ABT125CSJX from Fairchild Semiconductor is a IC BUFFER NON-INVERT 5.5V 14SOP

SN74ABT573APWR from Texas Instruments is a Integrated Circuit Octal Transparent D-Type Latches With 3-State Outputs - D-type latches. These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches of the SN54ABT573 and SN74ABT573A are transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

74ABT74N,112 from NXP USA Inc. is a IC FF D-TYPE DUAL 1BIT 14DIP

74ABT04D,112 from Nexperia USA Inc. is a IC INVERTER 6CH 1-INP 14SO

74ABT16501CMTDX from onsemi is a IC UNIV BUS TXRX 18BIT 56TSSOP

74ABT16373CSSC from Fairchild Semiconductor is a BUS DRIVER, ABT SERIES