Search results for “PULSEJACK JK”

The JK0-0144BNL from Pulse Electronics is a 1-port RJ45 through-hole modular jack with magnetics for 10/100 Base-TX and Power over Ethernet (PoE).

The JK0-0136NL from Pulse Electronics is a 1-port RJ45 through-hole jack with magnetics, supporting 10/100/1000 BASE-T and AutoMDIX.

The J1V-U2500NL from Pulse Electronics is a 1-port RJ45 jack with through-hole mounting, rated 2.5G BASE-T, with AutoMDIX and Power over Ethernet (PoE).

The JKM-0004NL from Pulse Electronics is a 1-port modular jack with magnetics for 1000 BASE-T, PCB mount.

The JK0-0177NL from Pulse Electronics is a 1-port RJ45 through-hole jack with magnetics, supporting 10/100/1000 Base-T, AutoMDIX and Power over Ethernet+ (PoE+).

The 74F109SJ from Fairchild Semiconductor is a dual 1-bit JK flip-flop Integrated Circuit in a 16-SOP package.

The JK0-0116NL from Pulse Electronics is a 1-port RJ45 through-hole jack with magnetics, supporting 10/100/1000 BASE-T and AutoMDIX.

The CD4027AD3 from Harris Corporation is a dual JK flip-flop with 2 elements, 1 bit per element and positive edge triggering, in a 16-CDIP (0.300", 7.62 mm) package.

The JX10-0045NL from Pulse Electronics is a 1-port RJ45 through-hole jack for 10/100 Base-TX with AutoMDIX.

The JXD3-0004NL from Pulse Electronics is a 1-port RJ45 through-hole jack for 10/100 Base-TX with AutoMDIX.

The JXKM-0004NL from Pulse Electronics is a 1-port modular jack with magnetics for 1000 BASE-T, PCB mount.

The JM38510/65305BEA from Texas Instruments is a dual JK-type flip-flop Integrated Circuit with 2 elements and 1 bit per element, negative edge, in a 16-CDIP (0.300" 7.62mm) package.

JM38510/05152BEA from Texas Instruments is a CMOS Dual J-K Master-Slave Flip-Flop - JK flip-flops. CD4027B is a single monolithic chip integrated circuit containing two identical complementary-symmetry J-K flip flops. Each flip-flop has provisions for individual J, K, Set, Reset, and Clock input signals. Buffered Q and Q signals are provided as outputs. This input-output arrangement provides for compatibile operation with the RCA-CD4013B dual D-type flip-flop. The CD4027B is useful in performing control, register, and toggle functions. Logic levels present at the J and K inputs along with internal self-steering control the state of each flip-flop; changes in the flip-flop state are synchronous with the postitive-going transition of the clock pulse. Set and reset functions are independent of the clock and are initiated when a high level signal is present at either the Set or Reset input. The CD4027B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic packages (E suffice), 16-lead small-outline packages (M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).

The JK0-8001NL from Pulse Electronics is a single-port RJ45 modular jack rated for HDBaseT at 30 W.

The 7473N from Rochester Electronics, LLC is a dual JK flip-flop with clear function.

The JXD7-0V06NL from Pulse Electronics is a 1-port RJ45 modular jack for through-hole mounting, supporting 10/100 Base-TX with AutoMDIX (1X1 100D 1:1 TU).

The 74F109SJX from Fairchild Semiconductor is a dual JK-type flip-flop Integrated Circuit with 2 elements and 1 bit, positive edge triggered, in a 16-SOIC package (0.209", 5.30 mm width).

CD54ACT112F3A from Texas Instruments is a Dual Negative Edge Triggered J-K Flip-Flops with Set and Reset - JK flip-flops. The ’ACT112 devices contain two independent J-K negative-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the J and K inputs meeting the setup-time requirements is transferred to the outputs on the negative-going edge of the clock pulse (CLK). Clock triggering occurs at a voltage level and is not directly related to the fall time of the clock pulse. Following the hold-time interval, data at the J and K inputs may be changed without affecting the levels at the outputs. These versatile flip-flops can perform as toggle flip-flops by tying J and K high.

The JXD1-9008NL from Pulse Electronics is a 1-port RJ45 through-hole jack for 10/100 Base-TX with AutoMDIX.

SN54LS73AJ from Texas Instruments is a Dual J-K Flip-Flops With Clear and 3-state Outputs - JK flip-flops. The '73, and 'H73, contain two independent J-K flip-flops with individual J-K, clock, and direct clear inputs. The '73, and 'H73, are positive pulse-triggered flip-flops. J-K input is loaded into the master while the clock is high and transferred to the slave on the high-to-low transition. For these devices the J and K inputs must be stable while the clock is high. The 'LS73A contains two independent negative-edge-triggered flip-flops. The J and K inputs must be stable one setup time prior to the high-to-low clock transition for predictable operation. When the clear is low, it overrides the clock and data inputs forcing the Q output low and the Q output high. The SN5473, SN54H73, and the SN54LS73A are characterized for operation over the full military temperature range of -55°C to 125°C. The SN7473, and the SN74LS73A are characterized for operation from 0°C to 70°C.

The JXD0-0008NL from Pulse Electronics is a 1-port 100 Base-TX modular jack with magnetics for PCB mounting.

The JM38510/00206BCA from Texas Instruments is a JK flip-flop Integrated Circuit.

The SL-JK from Panasonic Industrial Automation Sales is a blue end socket hook-up connector with 0.5 mm spacing.

The JC0-0132NL from Pulse Electronics is a 12-port RJ45 modular jack with magnetics for through-hole PCB mounting, supporting 10/100/1000 Base-T with AutoMDIX.

The J0B-2014NL from Pulse Electronics is a 4-port RJ45 jack for 2.5G BASE-T, through-hole, with AutoMDIX and magnetics.

The J0B-0366NL from Pulse Electronics is a 12-port modular jack with magnetics for 1000 BASE-T, for PCB mounting.