Search results for “poscap tpf”

POS500 from Tripp Lite is a POS & PC'S 120V 6 OUTLET

TPD4F202YFUR from Texas Instruments is a FILTER RC(PI) 100 OHM/15PF SMD

TPLH-2R7/3000SL60138 from Tecate Group is a CAP 3000F 2.7V CHASSIS MOUNT

TPS61030PWPG4 from Texas Instruments is a IC REG BOOST ADJ 3.6A 16HTSSOP

TPLH-2R7/2000SL60102 from Tecate Group is a CAP 2000F 2.7V CHASSIS MOUNT

POS500TAA from Tripp Lite is a POS & PC'S 120V 6 OUTLET

TPUM0J221M656530TR from Trustcap is a ALUMIN CAP POLY 220UF 20% 6.3V SMD

TPS40021MPWPREP from Texas Instruments is a IC REG CTRLR BUCK 16HTSSOP

TPLH-2R7/1200SL60X74 from Tecate Group is a CAP 1200F 2.7V CHASSIS MOUNT

TPLH-3R0/3000SL60138 from Tecate Group is a CAP 3000F 3.0V THREADED

TPS1100PWR from Texas Instruments is a MOSFET P-CH 15V 1.27A 8TSSOP

TPS1101PWR from Texas Instruments is a MOSFET P-CH 15V 2.18A 16TSSOP

TPS61031PWPR from Texas Instruments is a IC REG BOOST 3.3V 3.6A 16HTSSOP

TPS60111PWPG4 from Texas Instruments is a Integrated Circuit 3 cell to regulated 5V, 150-mA low noise charge pump - DC/DC converters. The TPS60111 step-up, regulated charge pump generates a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries; or, one lithium or lithium ion battery). Output current is 150 mA from a 3-V input. Only four external capacitors are needed to build a complete low-noise dc/dc converter. The push-pull operating mode of two single-ended charge pumps assures the low output voltage ripple as current is continuously transferred to the output. From a 3-V input, the TPS60111 can start into full load with loads as low as 33 Ω. The TPS60111 features either constant frequency mode to minimize noise and output voltage ripple or the power-saving pulse-skip mode to extend battery life at light loads. The TPS60111 switching frequency is 300 kHz. The logic shutdown function reduces the supply current to 1-µA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors and has low EMI. It is available in the small 20-pin TSSOP PowerPAD™ package (PWP).

TPS54550MPWPREP from Texas Instruments is a IC REG BUCK ADJ 6A 16HTSSOP

TPK-6A from OptiFuse is a UL Class M Fuse, Time Delay 6A

TPS54615MPWPREP from Texas Instruments is a IC REG BUCK 2.5V 6A 28HTSSOP

TPS2384PAPR from Texas Instruments is a IC POE CNTRL 4 CHANNEL 64HTQFP

TPLH-2R7/650SL60X51 from Tecate Group is a CAP 650F 2.7V CHASSIS STUD MOUNT

TPLH-2R7/1500SL60X85 from Tecate Group is a CAP 1500F 2.7V CHASSIS MOUNT

TPS60110PWPG4 from Texas Instruments is a Integrated Circuit 3 cell to regulated 5V, 300-mA low noise charge pump - DC/DC converters. The TPS60110 step-up, regulated charge pump generates a 5-V ±4% output voltage from a 2.7-V to 5.4-V input voltage (three alkaline, NiCd, or NiMH batteries; or, one lithium or lithium ion battery). Output current is 300 mA from a 3-V input. Only four external capacitors are needed to build a complete low-noise dc/dc converter. The push-pull operating mode of two single-ended charge pumps assures the low output voltage ripple as current is continuously transferred to the output. From a 3-V input, the TPS60110 can start into full load with loads as low as 16 Ω. The TPS60110 features either constant frequency mode to minimize noise and output voltage ripple or the power-saving pulse-skip mode to extend battery life at light loads. The TPS60110 switching frequency is 300 kHz. The logic shutdown function reduces the supply current to 1-µA (max) and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors and has low EMI. It is available in the small 20-pin TSSOP PowerPAD™ package (PWP).

TPK-R-6A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 6A

TPL-10/10X30F from Tecate Group is a CAP 10F -10% +20% 2.7V T/H

TPLH-3R0/38WR12X46 from Tecate Group is a CAP 38F 3.0V T/H

TPK-3A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 3A

TPK-1.5A from OptiFuse is a UL Class M Fuse, Time Delay 1.5A

TPK-6.3A from OptiFuse is a UL Class M Fuse, Time Delay 6.3A

TPK-630mA from OptiFuse is a UL Class M Fuse, Time Delay 630m

TPK-R-7A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 7A

TP65H070LSG-TR from Transphorm is a GANFET N-CH 650V 25A PQFN88

TPLH-3R0/350SS35X61 from Tecate Group is a CAP 350F 3V THROUGH HOLE

TPS2383APMG4 from Texas Instruments is a IC OCTAL POWER MANAGER 64LQFP

TPS40021MPWPEP from Texas Instruments is a IC REG CTRLR BUCK 16HTSSOP

TPK-R-25A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 25A

TPS70345MPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, dual-output low-dropout voltage regulator with power-up sequencing - Linear & low-dropout (LDO) regulators. The TPS70345 is designed to provide a complete power management solution for Texas Instruments DSP, processor power, ASIC, FPGA, and digital applications where dual output voltage regulators are required. Easy programmability of the sequencing function makes this family ideal for any Texas Instruments DSP applications with power sequencing requirement. Differentiated features, such as accuracy, fast transient response, SVS supervisory circuit (power on reset), manual reset inputs, and enable function, provide a complete system solution. The TPS70345 voltage regulator offers low dropout voltage and dual outputs with power up sequence control, which is designed primarily for DSP applications. This device has a low noise output performance without using any added filter bypass capacitors and are designed to have a fast transient response and be stable with 47 µF low ESR capacitors. This device has a fixed output voltage 3.3 V/1.2 V. Regulator 1 can support up to 1 A, and regulator 2 can support up to 2 A. Separate voltage inputs allow the designer to configure the source power. Because the PMOS pass element behaves as a low-value resistor, the dropout voltage is very low (typically 160 mV on regulator 1) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is low and independent of output loading (maximum of 250 µA over the full range of output current). This LDO family also features a sleep mode; applying a high signal to EN (enable) shuts down both regulators, reducing the input current to 1 µA at T J = 25°C. The device is enabled when the EN pin is connected to a low-level input voltage. The output voltages of the two regulators are sensed at the V SENSE1 and V SENSE2 pins respectively. The input signal at the SEQ pin controls the power-up sequence of the two regulators. When the device is enabled and the SEQ terminal is pulled high or left open, V OUT2 turns on first and V OUT1 remains off until V OUT2 reaches approximately 83% of its regulated output voltage. At that time V OUT1 is turned on. If V OUT2 is pulled below 83% (i.e. overload condition) of its regulated voltage, V OUT1 will be turned off. Pulling the SEQ terminal low reverses the power-up order and V OUT1 is turned on first. The SEQ pin is connected to an internal pullup current source. For each regulator, there is an internal discharge transistor to discharge the output capacitor when the regulator is turned off (disabled). The PG1 pin reports the voltage conditions at V OUT1. The PG1 pin can be used to implement a SVS (power on reset) for the circuitry supplied by regulator 1. The TPS70345 features a RESET (SVS, POR, or power on reset). RESET is an active low, open drain output and requires a pullup resistor for normal operation. When pulled up, RESET goes to a high impedance state (i.e. logic high) after a 120 ms delay when all three of the following conditions are met. First, V IN1 must be above the undervoltage condition. Second, the manual reset (MR) pin must be in a high impedance state. Third, V OUT2 must be above approximately 95% of its regulated voltage. To monitor V OUT1, the PG1 output pin can be connected to MR1 or MR2. RESET can be used to drive power on reset or a low-battery indicator. If RESET is not used, it can be left floating. Internal bias voltages are powered by VIN1 and require 2.7 V for full functionality. Each regulator input has an undervoltage lockout circuit that prevents each output from turning on until the respective input reaches 2.5 V.

TPK-4A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 4A