Search results for “dx”

The DXK410_T0_00001 from Panjit International Inc. is a single-phase standard bridge rectifier rated 1 kV, with glass passivated construction and through-hole DXK package.

TMUX7413FRRPR from Texas Instruments is a Integrated Circuit ±60-V fault-protected, 1:1 (SPST), 4-channel switches with 1.8-V logic (2 active low, 2 active high) - Analog & precision switches & muxes. The TMUX7411F, TMUX7412F, and TMUX7413F are complementary metal-oxide semiconductor (CMOS) analog switches in 1:1 (SPST), 4-channel configurations. The devices work well with dual supplies (±5 V to ±22 V), a single supply (8 V to 44 V), or asymmetric supplies (such as V DD = 12 V, V SS = -5 V). The overvoltage protection is available in powered and powered-off conditions, making the TMUX741xF devices suitable for applications where power supply sequencing cannot be precisely controlled. The devices block fault voltages up to +60 V or -60 V relative to ground in powered and powered-off conditions. When no power supplies are present, the switch channels remain in the OFF state regardless of the switch input conditions, and any control signal present on the logic pins is ignored. If the signal path input voltage on any Sx pin exceeds the supply voltage (V DD or V SS) by a threshold voltage (V T), the channel turns OFF and the Sx pin becomes high impedance. The drain pin (Dx) of a selected channel under a fault condition is floating. The TMUX741xF devices provide an active-low interrupt flag (FF) to indicate if any of the source inputs are experiencing a fault condition to help system diagnostics.

The DX07B024JJ2R1500 from JAE Electronics is a 24-position USB-C (USB Type-C) receptacle connector supporting USB 3.2 Gen 2 (USB 3.1 Gen 2, SuperSpeed+ (USB 3.1)), with board edge cutout, surface-mount and through-hole right-angle mounting.

The DX0505/RD/12 from Bulgin is a red LED panel indicator rated 12 V and 30 mA, with solder lug terminals.

The DX0506/RD/24 from Bulgin is a red 24 V LED panel indicator.

The DX1090/YL from Bulgin is a yellow LED panel indicator rated 2.1 V and 30 mA, with PC pin terminals.

The DX1093/RD from Bulgin is a red LED panel indicator rated 2 V and 30 mA, with PC pin terminals.

The MPF7100BVMA4ES from NXP USA Inc. is a PF7100 PMIC for i.MX processors and I.MX8DXP/DX, in a 48-HVQFN (7x7) package.

The AT97SC3204-DX2A12-20 from Microchip Technology is a crypto TPM Integrated Circuit with an LPC interface in a 28-TSSOP package.

The DX0505/GN/12 from Bulgin is a green panel indicator LED rated 12 V and 25 mA, with solder lug terminals.

The DX0508/GN/00 from Bulgin is a green panel-indicator LED rated 2.2 V and 25 mA, with 5.9" (150.00 mm) wire leads.

The DX1090/TR from Bulgin is a panel LED indicator with amber, green and red LEDs at 2.4 V and 10 mA each, with PC pin terminals.

The DX07S024JJ7R1200 from JAE Electronics is a 24-position USB Type-C receptacle connector supporting USB 3.2 Gen 2 (USB 3.1 Gen 2, SuperSpeed+ (USB 3.1)), with surface-mount and through-hole right-angle terminations (1200 PIE).

The DX0507/RD/24 from Bulgin is a red LED panel indicator rated 24 V and 30 mA, with 5.9" (150.00 mm) wire leads.

The DX4R005HJ5R2000 from JAE Electronics is a 5-position USB 2.0 micro B receptacle connector for surface mounting in a right-angle orientation.

The DX0507/BL/24 from Bulgin is a blue LED panel indicator rated 24 V and 25 mA, with 5.9" (150.00 mm) wire leads.

The DX0508/BL/12 from Bulgin is a blue LED panel indicator rated 12 V and 25 mA, with wire leads 5.9" (150.00 mm) long.

TMUX8211PWR from Texas Instruments is a Integrated Circuit 100-V, flat RON, 1:1 (SPST), four-channel switches with latch-up immunity and 1.8V logic (logic low) - Analog & precision switches & muxes. The TMUX8211, TMUX8212, and TMUX8213 are modern high voltage capable analog switches with Latch-Up immunity. Each device has four independently controllable 1:1, single-pole single-throw (SPST) switch channels. The devices work well with dual supplies, a single supply, or asymmetric supplies up to a maximum supply voltage of 100 V. The TMUX821x devices provide consistent analog parametric performance across the entire supply voltage range. The TMUX821x family supports bidirectional analog and digital signals on the source (Sx) and drain (Dx) pins. All logic inputs support logic levels of 1.8 V, 3.3 V, and 5 V and can be connected as high as 48 V, allowing for system flexibility with control signal voltage. Fail-safe logic circuitry allows voltages on the logic pins to be applied before the supply pin, protecting the device from potential damage. The device family provides Latch-Up immunity, preventing undesirable high current events between parasitic structures within the device. A Latch-Up condition typically continues until the power supply rails are turned off and can lead to device failure. The Latch-Up immunity feature allows this family of multiplexers to be used in harsh environments.

The DX07B024XJ1R1300 from JAE Electronics is a 24-position USB 3.1 Type-C receptacle for surface mounting.

The DX07S024JA1R1300 from JAE Electronics is a 24-position USB Type-C receptacle (USB 3.2 Gen 2, USB 3.1 Gen 2, SuperSpeed+) with surface-mount right-angle and through-hole terminations, supplied as 1300 pieces.

The DX0506/RD/12 from Bulgin is a red LED panel indicator rated 12 V and 30 mA, with solder lug terminals.

The DX07P022AA6R2000 from JAE Electronics is a USB Type-C plug connector for USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1)), with 24 (22+2 dummy) positions and board-edge straddle mount.

The DX0506/GN/00 from Bulgin is a green LED panel indicator rated 2.2 V and 25 mA, with solder lug terminals.

The DXX05-PT from Teledyne LeCroy is a positioner tip kit, a replacement probe tip for use with WaveLink oscilloscopes.

The DX0508/GN/24 from Bulgin is a green LED panel indicator rated 24 V and 25 mA, with 5.9" (150.00 mm) wire leads.

The DX0505/RD/24 from Bulgin is a red LED panel indicator rated 24 V and 30 mA, with solder lug terminals.