Search results for “universal bus functions”

I-7565 from ICP DAS USA INC is a USB TO CAN CONVERTER

7SB385MUTCG from onsemi is a IC BUS SWITCH 1 X 1:1 6UDFN

84161012A from Texas Instruments is a Octal Bus Transceivers - General-purpose transceivers. These octal bus transceivers are designed for asynchronous two-way communication between data buses. The devices transmit data from the A bus to the B bus or from the B bus to the A bus depending upon the level at the direction control (DIR) input. The enable input (G) can be used to disable the device so the buses are effectively isolated. The -1 versions of the SN74LS640 thru SN74LS642, SN74LS644, and SN74LS645 are identical to the standard versions except that the recommended maximum I OL is increased to 48 milliamperes. There are no -1 versions of the SN54LS640 thru SN54LS642, SN54LS644, and SN54LS645. The SN54LS640 thru SN54LS642, SN54LS644, and SN54LS645 are characterized for operation over the full military tempearture range of -55°C to 125°C. The SN74LS640 thru SN74LS642, SN74LS644, and SN74LS645 are characterized for operation from 0°C to 70°C.

5962-8952501KA from Texas Instruments is a BUS DRIVER, AS SERIES

74FCT823ATQG from IDT, Integrated Device Technology Inc is a BUS INTERFACE REGISTER

74FST3244PY from IDT, Integrated Device Technology Inc is a 74FST3244 - BUS DRIVER

5962-9472601Q2A from Texas Instruments is a BUS DRIVER, ABT SERIES, 1 FUNC,

QS74FCT2648ATS0 from Quality Semiconductor is a REGISTERED BUS TRANSCEIVER, FCT

74CBTLVD3245BQ,115 from Nexperia USA Inc. is a IC BUS SWITCH 8 X 1:1 20DHVQFN

CD54ACT373F3A from Harris Corporation is a BUS DRIVER, ACT SERIES, 8-BIT,

SN74ABT16657DRL from Texas Instruments is a BUS TRANSCEIVER, ABT SERIES, 2-F

SN74GTLPH1655DGG from Texas Instruments is a REGISTERED BUS TRANSCEIVER

SN74ABT162841DLR from Texas Instruments is a Integrated Circuit 20-Bit Bus-Interface D-Type Latches With 3-State Outputs - D-type latches. These 20-bit transparent D-type latches feature noninverting 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The ’ABT162841 devices can be used as two 10-bit latches or one 20-bit latch. While the latch-enable (1LE or 2LE) input is high, the Q outputs of the corresponding 10-bit latch follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the levels set up at the D inputs. A buffered output-enable (1OE or 2OE) input can be used to place the outputs of the corresponding 10-bit latch in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The outputs, which are designed to sink up to 12 mA, include equivalent 25- series resistors to reduce overshoot and undershoot. These devices are fully specified for hot-insertion applications using I off and power-up 3-state. The I off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict. To ensure the high-impedance state during power up or power down, OE shall be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. OE does not affect the internal operation of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.

UPD720133GB-YEU-A from Renesas Electronics America Inc is a BUS CONTROLLER, CMOS, PQFP64

8416101RA from Texas Instruments is a SN54LS640 OCTAL BUS TRANSCEIVERS

CD74FCT646EN from Texas Instruments is a OCTAL BUS TRANSCEIVER

CY74FCT162543ETPVC from Texas Instruments is a BUS TRANSCEIVER, FCT SERIES

SN74ABT841ADBRE4 from Texas Instruments is a Integrated Circuit 10-Bit Bus-Interface D-Type Latches With 3-State Outputs - D-type latches. The SN54ABT841 and SN74ABT841A 10-bit latches are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The ten transparent D-type latches provide true data at their outputs. A buffered output-enable (OE) input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect the internal operations of the latch. Previously stored data can be retained or new data can be entered while the outputs are in the high-impedance state. When V CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT841 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT841A is characterized for operation from -40°C to 85°C.

7WB3125MUTAG from onsemi is a IC BUS SWITCH 1 X 1:1 8UDFN

NXB0102GF115 from NXP USA Inc. is a BUS TRANSCEIVER NTSX2102 SERIES

74CBTLV16211DGG,11 from NXP USA Inc. is a IC BUS SWITCH 24BIT LV 56-TSSOP

5962-8550601VSA from Texas Instruments is a SN54HCT245-SP OCTAL BUS TRANSCEI

74ALVT162244DGG118 from NXP USA Inc. is a BUS DRIVER, ALVT SERIES, 4-BIT

SN74CBTD16210DLR from Texas Instruments is a Integrated Circuit 5-V, 1:1 (SPST), 20-channel FET bus switch with level shifter & 2 control inputs - Protocol & bus switches & muxes. The SN74CBTD16210 provides 20 bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. A diode to V CC is integrated in the circuit to allow for level shifting from 5-V signals at the device inputs to 3.3-V signals at the device outputs. The device is organized as a dual 10-bit bus switch with separate output-enable (OE) inputs. It can be used as two 10-bit bus switches or as one 20-bit bus switch. When (OE) is low, the associated 10-bit bus switch is on, and port A is connected to port B. When (OE) is high, the switch is open, and the high-impedance state exists between the ports.

CP-134U-DB25M from Moxa is a 4 Port UPCI Board, w/ DB25M Cabl

SN74ALVCHR162409DL from Texas Instruments is a BUS EXCHANGER

SN74CBTLV3126DR from Texas Instruments is a IC BUS SWITCH 1 X 1:1 14SOIC

JM38510/32203BFA from Texas Instruments is a 54LS367A HEX BUS DRIVERS WITH 3-

SN74ABT841ADBR from Texas Instruments is a Integrated Circuit 10-Bit Bus-Interface D-Type Latches With 3-State Outputs - D-type latches. The SN54ABT841 and SN74ABT841A 10-bit latches are designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The ten transparent D-type latches provide true data at their outputs. A buffered output-enable (OE) input can be used to place the ten outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect the internal operations of the latch. Previously stored data can be retained or new data can be entered while the outputs are in the high-impedance state. When V CC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT841 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT841A is characterized for operation from -40°C to 85°C.

CD74FCT653M from Texas Instruments is a BUS TRANSCEIVER, FCT SERIES

SN74ABTE16245DLR from Texas Instruments is a Integrated Circuit 16-bit Incident-Wave Switching Bus Transceivers With 3-State Outputs - General-purpose transceivers. The ’ABTE16245 devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for synchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. These devices can be used as two 8-bit transceivers or one 16-bit transceiver. They allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. When (OE) is low, the device is active. The B port has an equivalent 25- series output resistor to reduce ringing. Active bus-hold inputs also are on the B port to hold unused or floating inputs at a valid logic level. The A port provides for the precharging of the outputs via V CC BIAS, which establishes a voltage between 1.3 V and 1.7 V when V CC is not connected. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

SNJ54AS645J from Texas Instruments is a 54AS645 OCTAL BUS TRANSCEIVERS W

54ACTQ574FM-MLS from National Semiconductor is a 54ACTQ574 - BUS DRIVER, ACT SERI

8408501SA from Texas Instruments is a SN54HC245 OCTAL BUS TRANSCEIVERS

SN74ABTE16246DL from Texas Instruments is a Integrated Circuit 11-Bit Incident-Wave Switching Bus Transceivers With 3-State and Open-Collector Outputs - General-purpose transceivers. The SN74ABTE16246 is an 11-bit noninverting transceiver designed for asynchronous two-way communication between buses. This device has open-collector and 3-state outputs. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. When OE is low, the device is active. The B port has an equivalent 25- series output resistor to reduce ringing. Active bus-hold inputs on the B port hold unused or floating inputs at a valid logic level. The A port provides for the precharging of the outputs via V CC BIAS, which establishes a voltage between 1.3 V and 1.7 V when V CC is not connected. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

7SB3125MUTCG from onsemi is a IC BUS SWITCH 1 X 1:1 6UDFN

TM-7565 from ICP DAS USA INC is a USB TO CAN CONVERTER