Search results for “POSCAP TPF”

TPS1101PWR from Texas Instruments is a MOSFET P-CH 15V 2.18A 16TSSOP

TPK-2.5A from OptiFuse is a UL Class M Fuse, Time Delay 2.5A

TPK-4A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 4A

25TQC22MYFT from Panasonic Electronic Components is a POLY TANT UL CAP 22UF 25V 2917

TPS16630PWPR from Texas Instruments is a IC ELECTRONIC FUSE 2% 20HTSSOP

TPK-R-10A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 10A

LA-ISPPAC-POWR1014A-01TN48E from Lattice Semiconductor Corporation is a IC PWR MANAGER ISP GP 48TQFP

TPS53129PWR from Texas Instruments is a Integrated Circuit 4.5-V to 24-V, synchronous dual-D-CAP2 buck controller - DC/DC controllers. The TPS53129 is a dual, adaptive on-time D-CAP2™ mode synchronous buck controller. The TPS53129 enables system designers to complete the suite of various end equipment’s power bus regulators with cost effective, low component count, and low standby current solution. The main control loop for the TPS53129 uses the D-CAP2™ mode control which provides a very fast transient response with no external components. The TPS53129 also has a circuit that enables the device to adapt to both low equivalent series resistance (ESR) output capacitors such as POSCAP or SP-CAP, and ultra-low ESR, ceramic capacitors. The fixed frequency emulated adaptive on-time control supports seamless operation between PWM mode at heavy load condition and reduced frequency operation at light load for high efficiency down to milliampere range.The device provides convenient and efficient operation with input voltages from 4.5 V to 24 V and output voltages from 0.76 V to 5.5 V. The TPS53129 is available in 4-mm × 4-mm 24-pin QFN (RGE) or 24-pin TSSOP (PW) packages, and is specified from -40°C to 85°C ambient temperature range.

TPS2383APMRG4 from Texas Instruments is a IC POE CNTRL 8 CHANNEL 64LQFP

TPK-2A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 2A

TPS5120QDBTREP from Texas Instruments is a Integrated Circuit Enhanced Product Dual Output Two-Phase Synchronous Buck Dc/Dc Controller - DC/DC controllers. The TPS5120 is a dual channel, high-efficiency synchronous buck controller where the outputs run 180 degrees out of phase, which lowers the input current ripple, thereby reducing the input capacitance cost. The PWM/SKIP pin allows the operating mode to switch from PWM mode to skip mode under light load conditions. The skip mode enables a lower operating frequency and shortens the pulse width to the low-side MOSFET, increasing the efficiency under light load conditions. These two modes, along with synchronous-rectifier drivers, dead time, and very low quiescent current, allow power to be conserved and the battery life to be extended under all load conditions. The 1.5 A (typical) high-side and low-side MOSFET drivers on-chip are designed to drive less expensive N-channel MOSFETs. The resistorless current protection and fixed high-side driver voltage simplify the power supply design and reduce the external parts count. Each channel is independent, offering a separate controller, overcurrent protection, and standby control. Sequencing is flexible and can be tailored by choosing different softstart capacitor values. Other features, such as undervoltage lockout, power good, overvoltage, undervoltage, and programmable short-circuit protection promote system reliability.

TPS5120MDBTREP from Texas Instruments is a Integrated Circuit Enhanced Product Dual Output Two-Phase Synchronous Buck Dc/Dc Controller - DC/DC controllers. The TPS5120 is a dual channel, high-efficiency synchronous buck controller where the outputs run 180 degrees out of phase, which lowers the input current ripple, thereby reducing the input capacitance cost. The PWM/SKIP pin allows the operating mode to switch from PWM mode to skip mode under light load conditions. The skip mode enables a lower operating frequency and shortens the pulse width to the low-side MOSFET, increasing the efficiency under light load conditions. These two modes, along with synchronous-rectifier drivers, dead time, and very low quiescent current, allow power to be conserved and the battery life to be extended under all load conditions. The 1.5 A (typical) high-side and low-side MOSFET drivers on-chip are designed to drive less expensive N-channel MOSFETs. The resistorless current protection and fixed high-side driver voltage simplify the power supply design and reduce the external parts count. Each channel is independent, offering a separate controller, overcurrent protection, and standby control. Sequencing is flexible and can be tailored by choosing different softstart capacitor values. Other features, such as undervoltage lockout, power good, overvoltage, undervoltage, and programmable short-circuit protection promote system reliability.

TPS548B22RVFT from Texas Instruments is a IC REG BUCK ADJ 25A 40LQFN

TPS2384APAPR from Texas Instruments is a IC POE CNTRL 4 CHANNEL 64HTQFP

TPS62623YFFT from Texas Instruments is a IC REG BUCK 1.225V 600MA 6DSBGA

TPS40071PWPG4 from Texas Instruments is a IC REG CTRLR BUCK 16HTSSOP

TPK-12A from OptiFuse is a UL Class M Fuse, Time Delay 12A

TPLH-2R7/1500SL60X85 from Tecate Group is a CAP 1500F 2.7V CHASSIS MOUNT

TPK-9A from OptiFuse is a UL Class M Fuse, Time Delay 9A

TPK-15A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 15A

TPS54350MPWPREP from Texas Instruments is a IC REG BUCK ADJ 3A 16HTSSOP

TPS54613PWPRG4 from Texas Instruments is a IC REG BUCK 1.5V 6A 28HTSSOP

TPS2070DAP from Texas Instruments is a IC PCMCIA PWR I/F SW 32HTSSOP

TPK-25A from OptiFuse is a UL Class M Fuse, Time Delay 25A

TPK-16A from OptiFuse is a UL Class M Fuse, Time Delay 16A

TPD6F002DSVR from Texas Instruments is a FILTER RC(PI) 100 OHM/17PF SMD

ISPPAC-POWR1014-01TN48I from Lattice Semiconductor Corporation is a IC PWR MANAGER ISP 6-12V 48TQFP

TPS54225TPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 4.5V to 18V, 2A Synchronous Buck Converter with DCAP2 Mode - DC/DC converters. The TPS54225-Q1 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54225-Q1 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54225-Q1 uses the D-CAP2™ mode control which provides a fast transient response with no external compensation components. The TPS54225-Q1 also has a proprietary circuit that enables the device to adapt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V V CC input, and from 2-V to 18-V VIN input power supply voltage. The output voltage can be programmed between 0.76 V and 5.5 V. The device also features an adjustable slow start time and a power good function. The TPS54225-Q1 is available in the 14 pin HTSSOP package, and designed to operate from -40°C to 85°C.

TPL-22/12X35F from Tecate Group is a CAP 22F -10% +20% 2.7V T/H

TPK-R-1.6A from OptiFuse is a UL CLASS M FUSE, TIME DELAY 1.6A

TPK-3.5A from OptiFuse is a UL Class M Fuse, Time Delay 3.5A

TPK-1.6A from OptiFuse is a UL Class M Fuse, Time Delay 1.6A

TPK-1.25A from OptiFuse is a UL Class M Fuse, Time Delay 1.25

TPK-R-6.3A from OptiFuse is a UL Class CC Fuse, Time Delay 6.3

TPS40071PWPRG4 from Texas Instruments is a IC REG CTRLR BUCK 16HTSSOP

TPL-10/10X30F from Tecate Group is a CAP 10F -10% +20% 2.7V T/H

TPS63000DRCR from Texas Instruments is a IC REG BCK BST ADJ 1.6A 10VSON

TPS1100PWR from Texas Instruments is a MOSFET P-CH 15V 1.27A 8TSSOP

TPD6F003DQDR from Texas Instruments is a FILTER RC(PI) 100 OHM/8.5PF SMD

LA-ISPPAC-POWR1014-01TN48E from Lattice Semiconductor Corporation is a IC PWR MANAGER ISP GP 48TQFP

TP 0000 146 1200 from Amphenol Tuchel Industrial is a ADJUSTMENTPEN-SET 3,6