Search results for “tms320c55x”

TMS320C5535AZHHA10 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 144BGA

TMS320VC5503GHH from Texas Instruments is a IC FIXED-POINT DSP 179-BGA

TMS320VC5506PGE from Texas Instruments is a IC FIXED-POINT DSP 144-LQFP

TMS320C5534NZHH10 from Texas Instruments is a Integrated Circuit DSP FIXED POINT BGA

TMS320C5534AZHHA10 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 144BGA

TMS320VC5501PGF300 from Texas Instruments is a IC FXD-PNT DSP 600 MIPS 176-LQFP

TMS320VC5509AGBBR from Texas Instruments is a IC DSP FIXED POINT 179-BGA

TMS320VC5502GBE300 from Texas Instruments is a FIXED-POINT DIGITAL SIGNAL PROCE

TMS320VC5510AZGWD2 from Texas Instruments is a Integrated Circuit DSP FIXED POINT BGA

TMS320VC5506GHHR from Texas Instruments is a IC FIXED POINT DSP 179-BGA

TMS320VC5506ZHHR from Texas Instruments is a IC FIXED POINT DSP 179-BGA

TMS320VC5502ZZZ200 from Texas Instruments is a Integrated Circuit Fixed-Point Digital Signal Processor - Audio & radar DSP SoCs. The TMS320VC5502 (5502) fixed-point digital signal processor (DSP) is based on the TMS320C55x™ DSP generation CPU processor core. The C55x™ DSP architecture achieves high performance and low power through increased parallelism and total focus on reduction in power dissipation. The CPU supports an internal bus structure that is composed of one program bus, three data read buses, two data write buses, and additional buses dedicated to peripheral and DMA activity. These buses provide the ability to perform up to three data reads and two data writes in a single cycle. In parallel, the DMA controller can perform data transfers independent of the CPU activity. The C55x™ CPU provides two multiply-accumulate (MAC) units, each capable of 17-bit × 17-bit multiplication in a single cycle. A central 40-bit arithmetic/logic unit (ALU) is supported by an additional 16-bit ALU. Use of the ALUs is under instruction set control, providing the ability to optimize parallel activity and power consumption. These resources are managed in the Address Unit (AU) and Data Unit (DU) of the C55x CPU. The C55x DSP generation supports a variable byte width instruction set for improved code density. The Instruction Unit (IU) performs 32-bit program fetches from internal or external memory and queues instructions for the Program Unit (PU). The Program Unit decodes the instructions, directs tasks to AU and DU resources, and manages the fully protected pipeline. Predictive branching capability avoids pipeline flushes on execution of conditional instructions. The 5502 peripheral set includes an external memory interface (EMIF) that provides glueless access to asynchronous memories like EPROM and SRAM, as well as to high-speed, high-density memories such as synchronous DRAM and synchronous burst RAM. Additional peripherals include UART, watchdog timer, and an I-Cache. Three full-duplex multichannel buffered serial ports (McBSPs) provide glueless interface to a variety of industry-standard serial devices, and multichannel communication with up to 128 separately enabled channels. The host-port interface (HPI) is a 8-/16-bit parallel interface used to provide host processor access to 32K words of internal memory on the 5502. The HPI can be configured in either multiplexed or non-multiplexed mode to provide glueless interface to a wide variety of host processors. The DMA controller provides data movement for six independent channel contexts without CPU intervention. Two general-purpose timers, eight dedicated general-purpose I/O (GPIO) pins, and analog phase-locked loop (APLL) clock generation are also included. The 5502 is supported by the industry's award-winning eXpress DSP™, Code Composer Studio™ Integrated Development Environment (IDE), DSP/BIOS™, Texas Instruments. algorithm standard, and the industry's largest third-party network. The Code Composer Studio™ IDE features code generation tools that include a C Compiler, Visual Linker, simulator, RTDX™, XDS510™ emulation device drivers, and evaluation modules. The 5502 is also supported by the C55x™ DSP Library, which features more than 50 foundational software kernels (FIR filters, IIR filters, FFTs, and various math functions) as well as chip and board support libraries.

TMS320VC5509AZAYR from Texas Instruments is a IC PREAMP ULT LOW NOISE 179BGA

TMS320VC5509AZHHC from Texas Instruments is a Integrated Circuit DSP FIXED POINT BGA

TMX320C5515AZCH12 from Texas Instruments is a Integrated Circuit FIXED POINT DSP 196NFBGA

TMS320C5532AZHH05 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 144BGA

TMS320C5534NZAY10 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 144BGA

TMS320C5532NZAY10 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 144BGA

TMS320VC5509AZHH from Texas Instruments is a Integrated Circuit FIXED POINT DSP 179-BGA

TMS320VC5509AGHH from Texas Instruments is a Integrated Circuit DSP FIX PT 16-BIT 179-BGA

TMS320VC5509AGHHR from Texas Instruments is a Integrated Circuit FIXED POINT DSP 179-BGA

TMS320VC5507ZAYR from Texas Instruments is a IC DSP FIXED POINT 179-BGA

TMS320VC5509AZAYC from Texas Instruments is a Integrated Circuit DSP FIX PT 16-BIT 179-BGA

TMS32C5517AZCHA20R from Texas Instruments is a Integrated Circuit Low power C55x fixed point DSP- up to 200MHz, USB, LCD interface, FFT HWA, SAR ADC - Audio & radar DSP SoCs. This device is a member of TI's C5000 fixed-point Digital Signal Processor (DSP) product family and is designed for low active and standby power consumption. The device is based on the TMS320C55x DSP generation CPU processor core. The C55x DSP architecture achieves high performance and low power through increased parallelism and total focus on power savings. The CPU supports an internal bus structure that is composed of one program bus, one 32-bit data read bus and two 16-bit data read buses, two 16-bit data write buses, and additional buses dedicated to peripheral and DMA activity. These buses provide the ability to perform up to four 16-bit data reads and two 16-bit data writes in a single cycle. The device also includes four DMA controllers, each with 4 channels, providing data movement for 16 independent channel contexts without CPU intervention. Each DMA controller can perform one 32-bit data transfer per cycle, in parallel and independent of the CPU activity. The C55x CPU provides two multiply-accumulate (MAC) units, each capable of 17-bit x 17-bit multiplication and a 32-bit add in a single cycle. A central 40-bit arithmetic and logic unit (ALU) is supported by an additional 16-bit ALU. Use of the ALUs is under instruction set control, providing the ability to optimize parallel activity and power consumption. These resources are managed in the Address Unit (AU) and Data Unit (DU) of the C55x CPU. The C55x CPU supports a variable byte width instruction set for improved code density. The Instruction Unit (IU) performs 32-bit program fetches from internal or external memory and queues instructions for the Program Unit (PU). The PU decodes the instructions, directs tasks to the AU and DU resources, and manages the fully protected pipeline. Predictive branching capability avoids pipeline flushes on execution of conditional instructions. The GPIO functions along with the 10-bit SAR ADC to provide sufficient pins for status, interrupts, and bit I/O for keyboards, and media interfaces. Serial media is supported through two multimedia card and secure digital (MMC and SD) peripherals, three Inter-IC Sound (I2S Bus) modules, one serial port interface (SPI) with up to four chip selects, one master and slave multichannel serial port interface (McSPI) with up to three chip selects, one multichannel serial port (McBSP), one I 2 C multimaster and slave interface, and a universal asynchronous receiver/transmitter (UART) interface The device peripheral set includes an external memory interface (EMIF) that provides glueless access to asynchronous memories, such as EPROM, NOR, NAND, and SRAM, as well as to high-speed, high-density memories such as synchronous DRAM (SDRAM) and mobile SDRAM (mSDRAM). Additional peripherals include a configurable 16-bit universal host-port interface (UHPI), a high-speed universal serial bus (USB2.0) device mode only, a real-time clock (RTC), three general-purpose timers with one configurable as a watchdog timer, and an analog phase-locked loop (APLL) clock generator. The device also includes a tightly coupled FFT hardware accelerate that supports 8- to 1024-point (by power of 2) real- and complex-valued FFTs and three integrated LDOs to power different sections of the device, except CV DDRTC which requires an external power source: ANA_LDO to provide 1.3 V to the SAR and power-management circuits (V DDA_ANA), DSP_LDO to provide 1.3 or 1.05 V to the DSP core (CV DD), selectable on-the-fly by software as long as operating frequency ranges are observed, and USB_LDO to provide 1.3 V to the USB core digital (USB_V DD1P3) and PHY circuits (USB_V DDA1P3). The device is supported by the industry’s award-winning eXpressDSP, Code Composer Studio Integrated Development Environment (IDE), DSP/BIOS, Texas Instruments’ algorithm standard, and a large third-party network. Code Composer Studio IDE features code generation tools including a C Compiler and Linker, RTDX, XDS100, XDS510, XDS560 emulation device drivers, and evaluation modules. The device is also supported by the C55x DSP library which features more than 50 foundational software kernels (FIR filters, IIR filters, FFTs, and various math functions) as well as chip support libraries.

TMS320VC5506ZAYR from Texas Instruments is a IC DSP FIXED POINT 179-BGA

TMS320VC5502ZZZ300 from Texas Instruments is a Integrated Circuit FIXED POINT DSP 201-BGA

TMS320VC5509AZHHR from Texas Instruments is a Integrated Circuit FIXED POINT DSP 179-BGA

TMS320VC5503ZHH from Texas Instruments is a Integrated Circuit FIXED POINT DSP 179-BGA

TMX320C5505AZCH12 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 196NFBGA

TMX320C5504AZCH12 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 196NFBGA

TMX320C5505AZCH15 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 196NFBGA

TMX320C5514AZCH12 from Texas Instruments is a Integrated Circuit FIXED POINT DSP 196NFBGA

TMS320VC5506GHH from Texas Instruments is a Integrated Circuit FIXED-POINT DSP 179-BGA

TMX320C5504AZCH15 from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 196NFBGA

TMS320VC5507GHH from Texas Instruments is a Integrated Circuit DSP FIXED-POINT 16BIT 179-BGA

TMS320SP103AZGW2 from Texas Instruments is a Integrated Circuit DGTL SIGNAL PROCESSOR 240BGA

TMS320VC5507ZHHR from Texas Instruments is a Integrated Circuit FIXED POINT DSP 179-BGA

TMS320VC5506ZHH from Texas Instruments is a Integrated Circuit FIXED-POINT DSP 179-BGA

C55EQUAL from Texas Instruments is a Integrated Circuit Low power C55x fixed point DSP- up to 300MHz - Audio & radar DSP SoCs. The TMS320VC5501 (5501) fixed-point digital signal processor (DSP) is based on the TMS320C55x™ DSP generation CPU processor core. The C55x™ DSP architecture achieves high performance and low power through increased parallelism and total focus on reduction in power dissipation. The CPU supports an internal bus structure that is composed of one program bus, three data read buses, two data write buses, and additional buses dedicated to peripheral and DMA activity. These buses provide the ability to perform up to three data reads and two data writes in a single cycle. In parallel, the DMA controller can perform data transfers independent of the CPU activity. The C55x™ CPU provides two multiply-accumulate (MAC) units, each capable of 17-bit × 17-bit multiplication in a single cycle. A central 40-bit arithmetic/logic unit (ALU) is supported by an additional 16-bit ALU. Use of the ALUs is under instruction set control, providing the ability to optimize parallel activity and power consumption. These resources are managed in the Address Unit (AU) and Data Unit (DU) of the C55x CPU. The C55x DSP generation supports a variable byte width instruction set for improved code density. The Instruction Unit (IU) performs 32-bit program fetches from internal or external memory and queues instructions for the Program Unit (PU). The Program Unit decodes the instructions, directs tasks to AU and DU resources, and manages the fully protected pipeline. Predictive branching capability avoids pipeline flushes on execution of conditional instructions. The 5501 peripheral set includes an external memory interface (EMIF) that provides glueless access to asynchronous memories like EPROM and SRAM, as well as to high-speed, high-density memories such as synchronous DRAM and synchronous burst RAM. Additional peripherals include UART, watchdog timer, and an I-Cache. Two full-duplex multichannel buffered serial ports (McBSPs) provide glueless interface to a variety of industry-standard serial devices, and multichannel communication with up to 128 separately enabled channels. The host-port interface (HPI) is an 8-bit parallel interface used to provide host processor access to 16K words of internal memory on the 5501. The HPI operates in multiplexed mode to provide glueless interface to a wide variety of host processors. The DMA controller provides data movement for six independent channel contexts without CPU intervention. Two general-purpose timers, eight dedicated general-purpose I/O (GPIO) pins, and analog phase-locked loop (APLL) clock generation are also included. The 5501 is supported by the industry's award-winning eXpressDSP™, Code Composer Studio™ Integrated Development Environment (IDE), DSP/BIOS™, Texas Instruments' algorithm standard, and the industry's largest third-party network. The Code Composer Studio× IDE features code generation tools that include a C Compiler, Visual Linker, simulator, RTDX™, XDS510™ emulation device drivers, and evaluation modules. The 5501 is also supported by the C55x™ DSP Library, which features more than 50 foundational software kernels (FIR filters, IIR filters, FFTs, and various math functions) as well as chip and board support libraries.

TMS320VC5507ZHH from Texas Instruments is a Integrated Circuit FIXED POINT DSP 179-BGA

TMX320VC5504DZCH from Texas Instruments is a Integrated Circuit DSP FIX PT 16BIT LP 196NFBGA

SM32VC5510AGGWA2EP from Texas Instruments is a IC DSP FIXED-POINT 240-BGA

TMX320VC5505DZCH from Texas Instruments is a Integrated Circuit DSP FIX PT 16BIT LP 196NFBGA

TMS32C5534AZHHA05R from Texas Instruments is a Integrated Circuit DSP FIXED POINT BGA

TMS32C5534AZAYA05R from Texas Instruments is a Integrated Circuit DSP FIXED POINT BGA

VC55GPSZHH from Texas Instruments is a Integrated Circuit DSP FIXED POINT 179BGA

VC55GPSGHH from Texas Instruments is a Integrated Circuit DSP FIXED POINT 179BGA