Search results for “concept”

SN74LVC2G240DCUR from Texas Instruments is a Integrated Circuit 2-ch, 1.65-V to 5.5-V inverters with 3-state outputs - Inverting buffers & drivers. This dual buffer driver is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G240 device is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is organized as two 1-bit buffers/drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A input to the Y output. When OE is high, the outputs are in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1983880000 from Weidmuller is a HDC CFM 16 5F

SN74AUC2G79DCUR from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is operational at 0.8-V to 2.7-V V CC, but is designed specifically for 1.65-V to 1.95-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

3410 from Keystone Electronics is a BREADBRD PREPUNCHED INSULAT NPTH

FLE-140-01-G-DV-P from Samtec Inc. is a Cost Effective Surface Mount Socket, 0.050" Pitch — FLE

SN74AUP3G06DCUR from Texas Instruments is a Integrated Circuit 3-ch, 0.8-V to 3.6-V low power inverters with open-drain outputs - Inverting buffers & drivers. The AUP family is TI’s premier solution to the industry’s low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire V CC range of 0.8 V to 3.6 V, resulting in increased battery life (see Figure 1). This product also maintains excellent signal integrity (see the very low undershoot and overshoot characteristics shown in Figure 2). The output of SN74AUP3G06 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1651610000 from Weidmuller is a CONTACT H.D. CRIMP SOCKET 100/PK

SN74LVC2G125DCUT from Texas Instruments is a Integrated Circuit 2-ch, 1.65-V to 5.5-V buffers with 3-state outputs - Noninverting buffers & drivers. The SN74LVC2G125 device is a dual bus buffer gate, designed for 1.65-V to 5.5-V V CC operation. This device features dual line drivers with 3-state outputs. The outputs are disabled when the associated output-enable (OE) input is high. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC1G139DCUT from Texas Instruments is a Integrated Circuit 2-Line-to-4-Line Decoder - Digital demultiplexers & decoders. This SN74LVC1G139 2-to-4 line decoder is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC1G139 2-line to 4-line decoder is designed to be used in high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, this decoder can be used to minimize the effects of system decoding. When used with high-speed memories using a fast enable circuit, the delay times of these decoders and the enable time of the memory usually are less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. NanoStar and NanoFree package technology is a major breakthrough in device packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G157DCUR from Texas Instruments is a Integrated Circuit Single 2-Line to 1-Line Data Selector/Multiplexer - Digital multiplexers & encoders. This single 2-line to 1-line data selector multiplexer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G157 device features a common strobe (G) input. When the strobe is high, Y is low and Y is high. When the strobe is low, a single bit is selected from one of two sources and is routed to the outputs. The device provides true and complementary data. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G80DCURG4 from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G79DCURG4 from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1651570000 from Weidmuller is a CONTACT H.D. CRIMP SOCKET 100/PK

SN74LVC1G99DCUR from Texas Instruments is a Integrated Circuit Ultra-Configurable Multi-Function Gate With 3-State Outputs - Configurable gates. The SN74LVC1G99 device is operational from 1.65 V to 5.5 V. The SN74LVC1G99 device features configurable multiple functions with a 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, the output state is determined by 16 patterns of 4-bit input. The user can choose logic functions, such as MUX, AND, OR, NAND, NOR, XOR, XNOR, inverter, and buffer. All inputs can be connected to V CC or GND. This device functions as an independent inverter, but because of Schmitt action, it has different input threshold levels for positive-going (V T+) and negative-going (V T-) signals. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. NanoFree™ package technologies are a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC3G17DCTRE4 from Texas Instruments is a Integrated Circuit 3-ch, 1.65-V to 5.5-V buffers with Schmitt-Trigger inputs - Noninverting buffers & drivers. This triple Schmitt-trigger buffer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC3G17 device contains three buffers and performs the Boolean function Y = A. The device functions as three independent buffers but, because of Schmitt action, it may have different input threshold levels for positive-going (V T+) and negative-going (V T) signals. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC3G34DCTRG4 from Texas Instruments is a Integrated Circuit 3-ch, 1.65-V to 5.5-V buffers - Noninverting buffers & drivers. The SN74LVC3G34 device is a triple buffer gate designed for 1.65-V to 5.5-V V CC operation. The SN74LVC3G34 device performs the Boolean function Y = A in positive logic. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1651560000 from Weidmuller is a CONTACT H.D. CRIMP PIN 100/PK

1200700000 from Weidmuller is a CONTACT H.D. CRIMP PIN 100/PK

1983860000 from Weidmuller is a FRAME FIXED FEMALE SZ4 FOR 3MOD

74LVC1G139DCUTG4 from Texas Instruments is a Integrated Circuit 2-Line-to-4-Line Decoder - Digital demultiplexers & decoders. This SN74LVC1G139 2-to-4 line decoder is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC1G139 2-line to 4-line decoder is designed to be used in high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, this decoder can be used to minimize the effects of system decoding. When used with high-speed memories using a fast enable circuit, the delay times of these decoders and the enable time of the memory usually are less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. NanoStar and NanoFree package technology is a major breakthrough in device packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1983750000 from Weidmuller is a MODULE W/O CONTACTS MALE 2POS

1758490000 from Weidmuller is a FRAME FIXED FEMALE SZ6 FOR 5MOD

1908540000 from Weidmuller is a INSERT W/O CONTACTS FEMALE 1POS

1200500000 from Weidmuller is a CONTACT H.D. CRIMP PIN 100/PK

SN74LVC3G06DCUT from Texas Instruments is a Integrated Circuit 3-ch, 1.65-V to 5.5-V inverters with open-drain outputs - Inverting buffers & drivers. This triple inverter buffer/driver is designed for 1.65-V to 5.5-V V CC operation. The output of the SN74LVC3G06 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G86DCURG4 from Texas Instruments is a Integrated Circuit 2-ch, 2-input, 1.65-V to 5.5-V XOR (exclusive OR) gates - XOR (exclusive OR) gates. This dual 2-input exclusive-OR gate is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G86 performs the Boolean function Y = A ⊕ B or Y = A B + A B in positive logic. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A common application is as a true/complement element. If the input is low, the other input is reproduced in true form at the output. If the input is high, the signal on the other input is reproduced inverted at the output. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. An exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols.

SN74LVC2G157DCTR from Texas Instruments is a Integrated Circuit Single 2-Line to 1-Line Data Selector/Multiplexer - Digital multiplexers & encoders. This single 2-line to 1-line data selector multiplexer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G157 device features a common strobe (G) input. When the strobe is high, Y is low and Y is high. When the strobe is low, a single bit is selected from one of two sources and is routed to the outputs. The device provides true and complementary data. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1962780000 from Weidmuller is a CONNECTOR FIBER LC PLUG DUPLX

1773630000 from Weidmuller is a CONTACT H.D. CRIMP PIN 18AWG

1201200000 from Weidmuller is a CONTACT H.D. CRIMP SOCKET

1908520000 from Weidmuller is a INSERT W/O CONTACTS MALE 1POS

1651510000 from Weidmuller is a CONTACT H.D. CRIMP SOCKET 100/PK

1962880000 from Weidmuller is a CONNECTOR FIBER LC RECEPT DUPLX

SN74AUP2G00DCUR from Texas Instruments is a Integrated Circuit 2-ch, 2-input, 0.8-V to 3.6-V low power NAND gates - NAND gates. The AUP family is TI’s premier solution to the industry’s low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire V CC range of 0.8 V to 3.6 V, resulting in increased battery life (see Figure 1). This product also maintains excellent signal integrity (see the very low undershoot and overshoot characteristics shown in Figure 2). The SN74AUP2G00 performs the Boolean function Y = A • B or Y = A + B in positive logic. NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AUC2G86DCUR from Texas Instruments is a Integrated Circuit 2-ch, 2-input, 0.8-V to 2.7-V high speed XOR (exclusive OR) gates - XOR (exclusive OR) gates. This dual 2-input exclusive-OR gate is operational at 0.8-V to 2.7-V V CC, but is designed specifically for 1.65-V to 1.95-V V CC operation. The SN74AUC2G86 performs the Boolean function Y = B or Y = A B + A B in positive logic. A common application is as a true/complement element. If the input is low, the other input is reproduced in true form at the output. If the input is high, the signal on the other input is reproduced inverted at the output. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G125DCU3 from Texas Instruments is a Integrated Circuit 2-ch, 1.65-V to 5.5-V buffers with 3-state outputs - Noninverting buffers & drivers. The SN74LVC2G125 device is a dual bus buffer gate, designed for 1.65-V to 5.5-V V CC operation. This device features dual line drivers with 3-state outputs. The outputs are disabled when the associated output-enable (OE) input is high. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC1G79DBVR from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. The SN74LVC1G79 device is a single positive-edge-triggered D-type flip-flop that is designed for 1.65V to 5.5V VCC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the level at the output. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs when the device is powered down. This inhibits current backflow into the device which prevents damage to the device.

1200600000 from Weidmuller is a CONTACT H.D. CRIMP PIN 100/PK

1132010000 from Weidmuller is a CONNECTOR MOD PLUG 8P8C SHIELDED

SN74LVC1G99DCURG4 from Texas Instruments is a Integrated Circuit Ultra-Configurable Multi-Function Gate With 3-State Outputs - Configurable gates. The SN74LVC1G99 device is operational from 1.65 V to 5.5 V. The SN74LVC1G99 device features configurable multiple functions with a 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, the output state is determined by 16 patterns of 4-bit input. The user can choose logic functions, such as MUX, AND, OR, NAND, NOR, XOR, XNOR, inverter, and buffer. All inputs can be connected to V CC or GND. This device functions as an independent inverter, but because of Schmitt action, it has different input threshold levels for positive-going (V T+) and negative-going (V T-) signals. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. NanoFree™ package technologies are a major breakthrough in IC packaging concepts, using the die as the package.

1682420000 from Weidmuller is a CONTACT H.D. CRIMP PIN 24-28AWG

1651430000 from Weidmuller is a CONTACT H.D. CRIMP PIN 18AWG

1682220000 from Weidmuller is a FRAME FIXED MALE SZ6 FOR 5MOD

1014080000 from Weidmuller is a HDC CM BUS SV GCA M

SN74LVC2G74DCURG4 from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

1201500000 from Weidmuller is a CONTACT H.D. CRIMP SOCKET 100/PK