Search results for “403”

The 403 from Keystone Electronics is an unthreaded round aluminum spacer, #4 size, 0.625" (15.88 mm) or 5/8" long.

The LS-403 from Panasonic Industrial Automation Sales is a general-purpose digital laser sensor amplifier with bracket mount.

The 403-02 from Dremel is a 3/4" nylon bristle brush.

The ANT-403-USP-T from Linx Technologies Inc. is a 403 MHz chip antenna for solder surface mounting.

The ANT-403-SP from Linx Technologies Inc. is a 403 MHz MICS chip Radio Frequency antenna covering 400 to 405 MHz, for solder surface mounting.

The 103-1335-403 from Dialight is a large oil-tight panel indicator.

The SPT-403 from Prem Magnetics, Inc. is an audio output transformer through-hole with a 1.2 kCT primary and an 8 CT secondary impedance, in ohms.

The ANT-403-USP from Linx Technologies Inc. is a 403 MHz chip Radio Frequency antenna for solder surface mounting.

The AT-403(40) from Hirose Electric Co Ltd is an in-line Radio Frequency attenuator rated 3 dB, 0 Hz to 13 GHz, 50 Ω and 2 W, with an N-type connector.

The AC-403 from Bud Industries is a natural aluminum chassis with open ends, measuring 9.500" L x 5.000" W (241.30 mm x 127.00 mm) and 2.000" (50.80 mm) high.

The EW-403 from Chemtronics is a soldering tip.

The 2000-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 2001-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 2006-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 54-403 from NTE Electronics, Inc is an SPDT snap-action limit switch rated 15 A.

The 256-403 from WAGO Corporation is a 3-position push-button wire-to-board terminal block at a 45° (135°) angle with the board, with 0.200" (5.08 mm) pitch and through-hole mounting.

The 289-403 from WAGO Corporation is a 16-position interface module terminal block with screw connection to a male rectangular DIN 41651 connector, for 12-28 AWG wire.

The 2002-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 2004-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 255-403 from WAGO Corporation is a 3-position push-button wire-to-board PCB terminal block, vertical with board, with 0.200" (5.08 mm) pitch, through-hole.

The 2016-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 125-1136-403 from Dialight is a MIN. oil-tight panel indicator.

The 250-403 from WAGO Corporation is a 3-position push-button wire-to-board terminal block at 45° (135°) angle with board, 0.098" (2.50 mm) pitch, through-hole.

The 2010-403 from WAGO Corporation is a 3-position push-in insulated terminal block jumper bar with cross-connection flat pins.

The 750-403 from WAGO Corporation is a DIN rail input module with 4 digital inputs rated 0 to 24 V, operating from 24 VDC.

The 235-403 from WAGO Corporation is a 3-position wire-to-board PCB terminal block, horizontal with board, with 0.200" (5.08 mm) pitch and through-hole mounting (2.5 MM).

The 68705-403 from Amphenol ICC (FCI) is a 3-position through-hole header connector with 0.100" (2.54 mm) pitch.

The 68015-403 from Amphenol ICC (FCI) is a 3-position right-angle through-hole header with 0.100" (2.54 mm) pitch.