Search results for “54HCT”
Products
CD54HCT03F3A
Texas InstrumentsThe CD54HCT03F3A from Texas Instruments is a high-speed CMOS logic gate Integrated Circuit.
View full detailsCD54HCT646F
Harris CorporationThe CD54HCT646F from Harris Corporation is a non-inverting transceiver Integrated Circuit rated 5.5 V, with 1 element, 8 bits per element and 3-state outputs, in a 24-CDIP package.
View full detailsCD54HCT182F3A
Harris CorporationThe CD54HCT182F3A from Harris Corporation is a look-ahead carry generator Integrated Circuit in a 16-CERDIP package.
View full detailsCD54HCT163F161
Harris CorporationThe CD54HCT163F161 from Harris Corporation is a high-speed CMOS presettable counter Integrated Circuit (element bit).
View full detailsCD54HCT221F
Harris CorporationThe CD54HCT221F from Harris Corporation is a monostable multivibrator Integrated Circuit in a 16-CDIP package.
View full detailsCD54HCT4052F3A
Harris CorporationThe CD54HCT4052F3A from Harris Corporation is a 2-circuit switch Integrated Circuit with 4:1 switching and 130 Ω resistance, in a 16-CDIP package.
View full detailsCD54HCT257F3A
Texas InstrumentsThe CD54HCT257F3A from Texas Instruments is a high-speed CMOS logic multiplexer and decoder Integrated Circuit.
View full detailsCD54HCT02F
Harris CorporationThe CD54HCT02F from Harris Corporation is a NOR gate Integrated Circuit with 4 channels, in a 14-CDIP package.
View full detailsCD54HCT153F3A
Texas InstrumentsCD54HCT153F3A from Texas Instruments is a High Speed CMOS Logic Dual 4-Input Multiplexers - Digital multiplexers & encoders. The ’HC153 and ’HCT153 are dual 4- to 1-line selector/multiplexers that select one of four sources for each section by the common select inputs, S0 and S1. When the enable inputs (1E, 2E) are HIGH, the outputs are in the LOW state.
View full detailsCD54HCT573F
Texas InstrumentsCD54HCT573F from Texas Instruments is a High Speed CMOS Logic Octal Transparent Latch with 3-State Output - D-type latches
View full detailsCD54HCT574F3A
Texas InstrumentsThe CD54HCT574F3A from Texas Instruments is a single 8-bit D-type flip-flop Integrated Circuit in a 20-CDIP package.
View full detailsCD54HCT112F3A
Texas InstrumentsCD54HCT112F3A from Texas Instruments is a High Speed CMOS Logic Dual J-K Flip-Flops with Set and Reset, Negative-Edge Trigger - JK flip-flops
View full detailsCD54HCT245F3A
Texas InstrumentsCD54HCT245F3A from Texas Instruments is a High Speed CMOS Logic Non-Inverting Octal-Bus Transceiver with 3-State Outputs - General-purpose transceivers
View full detailsCD54HCT4060F3A
Texas InstrumentsCD54HCT4060F3A from Texas Instruments is a High Speed CMOS Logic 14-Stage Binary Counter with Oscillator - Counters. The ’HC4060 and ’HCT4060 each consist of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design of either RC or crystal oscillator circuits. A Master Reset input is provided which resets the counter to the all-0’s state and disables the oscillator. A high level on the MR line accomplishes the reset function. All counter stages are master-slave flip-flops. The state of the counter is advanced one step in binary order on the negative transition of O). All inputs and outputs are buffered. Schmitt trigger action on the input-pulse-line permits unlimited rise and fall times. In order to achieve a symmetrical waveform in the oscillator section the HCT4060 input pulse switch points are the same as in the HC4060; only the MR input in the HCT4060 has TTL switching levels.
View full detailsCD54HCT4060F3A
Harris CorporationThe CD54HCT4060F3A from Harris Corporation is a 14-bit binary counter Integrated Circuit with 1 element and negative-edge triggering, in a 16-CDIP package.
View full detailsCD54HCT640F3A
Texas InstrumentsCD54HCT640F3A from Texas Instruments is a High Speed CMOS Logic Octal Inverting Bus Transceiver with 3-State Outputs - General-purpose transceivers
View full detailsCD54HCT367F3A
Texas InstrumentsThe CD54HCT367F3A from Texas Instruments is a high-speed CMOS logic buffer and driver Integrated Circuit.
View full detailsCD54HCT4046AF3A
Texas InstrumentsThe CD54HCT4046AF3A from Texas Instruments is a high-speed CMOS phase-locked loop (PLL) clock generator Integrated Circuit.
View full detailsSN54HCT240J
Texas InstrumentsThe SN54HCT240J from Texas Instruments is an inverting octal buffer logic Integrated Circuit with 2 elements, 4 bits per element, 3-state outputs and a 20-CDIP package.
View full detailsCD54HCT283F3A
Texas InstrumentsCD54HCT283F3A from Texas Instruments is a High Speed CMOS Logic 4-Bit Binary Full Adder with Fast Carry - Counters
View full detailsCD54HCT4520F
Harris CorporationThe CD54HCT4520F from Harris Corporation is a binary counter Integrated Circuit with 2 elements, 4-bit operation and positive and negative polarity settings, in a 16-CDIP package.
View full detailsCD54HCT534F3A
Texas InstrumentsCD54HCT534F3A from Texas Instruments is a High Speed CMOS Logic Octal D-Type Positive-Edge Triggered Inverting Flip-Flops with 3-State Outputs - D-type flip-flops
View full detailsCD54HCT193F3A
Texas InstrumentsCD54HCT193F3A from Texas Instruments is a High Speed CMOS Logic Presettable Synchronous 4-Bit Binary Up/Down Counters - Counters. The ’HC192, ’HC193 and ’HCT193 are asynchronously presettable BCD Decade and Binary Up/Down synchronous counters, respectively. Presetting the counter to the number on the preset data inputs (P0-P3) is accomplished by a LOW asynchronous parallel load input (PL). The counter is incremented on the low-to-high transition of the Clock-Up input (and a high level on the Clock-Down input) and decremented on the low to high transition of the Clock-Down input (and a high level on the Clock-up input). A high level on the MR input overrides any other input to clear the counter to its zero state. The Terminal Count up (carry) goes low half a clock period before the zero count is reached and returns to a high level at the zero count. The Terminal Count Down (borrow) in the count down mode likewise goes low half a clock period before the maximum count (9 in the 192 and 15 in the 193) and returns to high at the maximum count. Cascading is effected by connecting the carry and borrow outputs of a less significant counter to the Clock-Up and CLock-Down inputs, respectively, of the next most significant counter. If a decade counter is present to an illegal state or assumes an illegal state when power is applied, it will return to the normal sequence in one count as shown in state diagram.
View full detailsCD54HCT191F3A
Texas InstrumentsCD54HCT191F3A from Texas Instruments is a High Speed CMOS Logic Presettable Synchronous 4-Bit Binary Up/Down Counter - Counters. The CD54/74HC190 are asynchronously presettable BCD decade counters, whereas the CD54/74HC191 and CD54/74HCT191 are asynchronously presettable binary counters. Presetting the counter to the number on preset data inputs (A-D) is accomplished by a low asynchronous parallel load (LOAD) input. Counting occurs when LOAD is high, count enable (CTEN) is low, and the down/up (D/U) input is either high for down counting or low for up counting. The counter is decremented or incremented synchronously with the low-to-high transition of the clock. When an overflow or underflow of the counter occurs, the MAX/MIN output, which is low during counting, goes high and remains high for one clock cycle. This output can be used for look-ahead carry in high-speed cascading (see Figure 1). The MAX/MIN output also initiates the ripple clock (RCO) output, which is normally high, goes low and remains low for the low-level portion of the clock pulse. These counters can be cascaded using RCO (see Figure 2). If a decade counter is preset to an illegal state or assumes an illegal state when power is applied, it returns to the normal sequence in one or two counts, as shown in the state diagrams (see Figure 3).
View full detailsCD54HCT299F3A
Harris CorporationThe CD54HCT299F3A from Harris Corporation is a parallel-in, parallel-out shift register with 1 element and 8 bits, in a 20-CDIP package.
View full detailsSNJ54HCT240J
Texas InstrumentsThe SNJ54HCT240J from Texas Instruments is an inverting buffer Integrated Circuit with 2 elements, 4 bits per element and a 3-state output, in a 20-CDIP package.
View full detailsCD54HCT04F
Texas InstrumentsThe CD54HCT04F from Texas Instruments is a high-speed CMOS logic inverter Integrated Circuit.
View full detailsCD54HCT158F3A
Harris CorporationThe CD54HCT158F3A from Harris Corporation is an inverting quad 2-input multiplexer (4 x 2:1) in a 16-CDIP package.
View full detailsCD54HCT688F
Harris CorporationThe CD54HCT688F from Harris Corporation is a magnitude comparator Integrated Circuit.
View full detailsMM54HCT245J
National SemiconductorThe MM54HCT245J from National Semiconductor is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element and 3-state output, rated 5.5 V, in a 20-CERDIP package.
View full detailsCD54HCT688F3A
Texas InstrumentsCD54HCT688F3A from Texas Instruments is a 8-Bit Identity/Magnitude Comparators (P=Q) with Enable - Specialty logic ICs
View full detailsCD54HCT377F3A
Texas InstrumentsCD54HCT377F3A from Texas Instruments is a High Speed CMOS Logic Octal D-Type Flip-Flops with Data Enable - D-type flip-flops. The ’HC377 and ’HCT377 are octal D-type flip-flops with a buffered clock (CP) common to all eight flip-flops. All the flip-flops are loaded simultaneously on the positive edge of the clock (CP) when the Data Enable (E) is Low.
View full detailsCD54HCT273F
Texas InstrumentsCD54HCT273F from Texas Instruments is a High Speed CMOS Logic Octal D-Type Flip-Flops with Reset - D-type flip-flops. The CD54HC273, CD74HC273, CD54HCT273, and CD74HCT273 high speed octal D-Type flip-flops with a direct clear input are manufactured with silicongate CMOS technology. The devices possess the low power consumption of standard CMOS integrated circuits. Information at the D input transfers to the Q outputs on the positive-going edge of the clock pulse. All eight flip-flops are controlled by a common clock (CLK) and a common reset (/CLR). Resetting is accomplished by a low voltage level independent of the clock. All eight Q outputs reset to a logic 0.
View full detailsCD54HCT646F3A
Harris CorporationThe CD54HCT646F3A from Harris Corporation is a non-inverting transceiver Integrated Circuit rated 5.5 V, with 1 element, 8 bits per element and 3-state outputs, in a 24-CDIP package.
View full detailsCD54HCT164F3A
Texas InstrumentsCD54HCT164F3A from Texas Instruments is a High Speed CMOS Logic 8-Bit Serial-In/Parallel-Out Shift Register - Shift registers. The ’HC164 and ’HCT164 are 8-bit, serial-in, parallel-out, shift registers with asynchronous reset. Data is shifted on the positive edge of Clock (CLK). A LOW on the RESET (CLR) pin resets the shift register and all outputs go to the LOW state regardless of the input conditions. Two Serial Data inputs (A and B) are provided, either one can be used as a data enable control.
View full detailsCD54HCT258F3A
Texas InstrumentsCD54HCT258F3A from Texas Instruments is a High Speed CMOS Logic Inverting Quad 2-Input Multiplexer with 3-State Outputs - Digital multiplexers & encoders. These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G) input is at a high logic level. To ensure the high-impedance state during power up or power down, G should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
View full detailsCD54HCT40102F
Harris CorporationThe CD54HCT40102F from Harris Corporation is a BCD decade counter Integrated Circuit with 2 elements, 4 bits per element and positive-edge triggering, in a 16-CDIP package.
View full detailsCD54HCT74F3A
Texas InstrumentsCD54HCT74F3A from Texas Instruments is a High Speed CMOS Logic Dual Positive-Edge Trigger D Flip-Flops with Set and Reset - D-type flip-flops. The CDx4HCT74-Q1 devices contain two independent D-type positive-edge-triggered flip-flops with asynchronous preset and clear pins for each.
View full detailsCD54HCT14F
Texas InstrumentsThe CD54HCT14F from Texas Instruments is a high-speed CMOS logic gate Integrated Circuit.
View full detailsCD54HCT164F
Harris CorporationThe CD54HCT164F from Harris Corporation is an 8-bit shift register Integrated Circuit with 1 element, in a 14-CDIP package.
View full detailsCD54HCT4052F
Harris CorporationThe CD54HCT4052F from Harris Corporation is an analog switch and multiplexer Integrated Circuit with 2 circuits, 4:1 switching and 130 Ω resistance, in a 16-CDIP package.
View full detailsCD54HCT4024F3A
Texas InstrumentsCD54HCT4024F3A from Texas Instruments is a High Speed CMOS Logic 7-Stage Binary Ripple Counter - Counters
View full detailsCD54HCT574F
Texas InstrumentsThe CD54HCT574F from Texas Instruments is a high-speed CMOS logic buffer and driver Integrated Circuit.
View full detailsCD54HCT4020F3A
Texas InstrumentsCD54HCT4020F3A from Texas Instruments is a High Speed CMOS Logic 14-Stage Binary Counter - Counters
View full detailsCD54HCT85F3A
Harris CorporationThe CD54HCT85F3A from Harris Corporation is a magnitude comparator with Bit specification, active-high output AB, in a 16-CDIP package.
View full detailsCD54HCT273F3A
Texas InstrumentsCD54HCT273F3A from Texas Instruments is a High Speed CMOS Logic Octal D-Type Flip-Flops with Reset - D-type flip-flops. The CD54HC273, CD74HC273, CD54HCT273, and CD74HCT273 high speed octal D-Type flip-flops with a direct clear input are manufactured with silicongate CMOS technology. The devices possess the low power consumption of standard CMOS integrated circuits. Information at the D input transfers to the Q outputs on the positive-going edge of the clock pulse. All eight flip-flops are controlled by a common clock (CLK) and a common reset (/CLR). Resetting is accomplished by a low voltage level independent of the clock. All eight Q outputs reset to a logic 0.
View full detailsCD54HCT4538F3A
Harris CorporationThe CD54HCT4538F3A from Harris Corporation is a monostable multivibrator with 55 ns timing, in a 16-CDIP package.
View full detailsCD54HCT259F3A
Texas InstrumentsCD54HCT259F3A from Texas Instruments is a High Speed CMOS Logic 8-Bit Addressable Latch - Other latches
View full details