Search results for “74ABT543”

The 74ABT543ADB,118 from NXP USA Inc. is a non-inverting transceiver Integrated Circuit rated 5.5 V with 1 element, 8 bits per element and 3-state output, in a 24-SSOP package.

The 74ABT543AD,118 from NXP USA Inc. is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element, 3-state outputs and a 5.5 V rating, in a 24-SO package.

The 74ABT543AD,112 from NXP USA Inc. is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element, 3-state outputs and a 5.5 V rating, in a 24-SO package.

The 74ABT543CMSA from onsemi is a non-inverting transceiver Integrated Circuit with 1 element of 8 bits per element, a 3-state output and a 5.5 V rating, in a 24-SSOP package.

The 74ABT543CMSA from Fairchild Semiconductor is a non-inverting transceiver Integrated Circuit rated to 5.5 V, in a 24-SSOP package.

The 74ABT543CMTCX from Fairchild Semiconductor is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element and 3-state output, rated 5.5 V, in a 24-TSSOP package.

The 74ABT543CSCX from onsemi is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element, 3-state outputs, in a 24-SOP package, rated 5.5 V.

The 74ABT543CMTC from Fairchild Semiconductor is a non-inverting transceiver Integrated Circuit rated at 5.5 V in a 24-TSSOP package.

The 74ABT543CMSAX from onsemi is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element, 3-state outputs, in a 24-SSOP package, rated 5.5 V.

The 74ABT543CSC from onsemi is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element and 3-state outputs, rated for 5.5 V, in a 24-SOP package.

The 74ABT543CSCX from Fairchild Semiconductor is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element and 3-state outputs, rated to 5.5 V in a 24-SOP package.

SN74ABT543APWR from Texas Instruments is a Integrated Circuit Octal Registered Transceivers With 3-State Outputs - General-purpose transceivers. The 'ABT543A octal transceivers contain two sets of D-type latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow. The A-to-B enable (CEAB) input must be low to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A-to-B latches are transparent; a subsequent low-to-high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT543A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT543A is characterized for operation from -40°C to 85°C.

The SN74ABT543NT from Texas Instruments is a registered bus transceiver Integrated Circuit with element, bit per element and output specifications.

The SN74ABT543ADW from Texas Instruments is a non-inverting transceiver with 1 element of 8 bits per element and 3-state outputs, rated 5.5 V, in a 24-SOIC package.

The SN74ABT543ANT from Texas Instruments is a non-inverting transceiver with 1 element, 8 bits per element and 3-state outputs, rated at 5.5 V, in a 24-PDIP package.

The SN74ABT543ANSRE4 from Texas Instruments is a non-inverting transceiver Integrated Circuit rated at 5.5 V, with 1 element, 8 bits per element and 3-state output, in a 24-SO package.

The SN74ABT543ADWR from Texas Instruments is a non-inverting transceiver with 1 element, 8 bits per element, and 3-state outputs, rated for 5.5 V in a 24-SOIC package.

SN74ABT543ADBRG4 from Texas Instruments is a Integrated Circuit Octal Registered Transceivers With 3-State Outputs - General-purpose transceivers. The 'ABT543A octal transceivers contain two sets of D-type latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow. The A-to-B enable (CEAB) input must be low to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A-to-B latches are transparent; a subsequent low-to-high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT543A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT543A is characterized for operation from -40°C to 85°C.

The SN74ABT543ANSR from Texas Instruments is an 8-bit non-inverting transceiver with 1 element and 3-state output, rated 5.5 V, in a 24-SO package.

The SN74ABT543ANSRG4 from Texas Instruments is a non-inverting transceiver rated 5.5 V, with 1 element of 8 bits and 3-state outputs, in a 24-SO package.

SN74ABT543ADBR from Texas Instruments is a Integrated Circuit Octal Registered Transceivers With 3-State Outputs - General-purpose transceivers. The 'ABT543A octal transceivers contain two sets of D-type latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow. The A-to-B enable (CEAB) input must be low to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A-to-B latches are transparent; a subsequent low-to-high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT543A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT543A is characterized for operation from -40°C to 85°C.

SN74ABT543APW from Texas Instruments is a Integrated Circuit Octal Registered Transceivers With 3-State Outputs - General-purpose transceivers. The 'ABT543A octal transceivers contain two sets of D-type latches for temporary storage of data flowing in either direction. Separate latch-enable (LEAB or LEBA) and output-enable (OEAB or OEBA) inputs are provided for each register to permit independent control in either direction of data flow. The A-to-B enable (CEAB) input must be low to enter data from A or to output data from B. If CEAB is low and LEAB is low, the A-to-B latches are transparent; a subsequent low-to-high transition of LEAB puts the A latches in the storage mode. With CEAB and OEAB both low, the 3-state B outputs are active and reflect the data present at the output of the A latches. Data flow from B to A is similar, but requires using the CEBA, LEBA, and OEBA inputs. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The SN54ABT543A is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT543A is characterized for operation from -40°C to 85°C.

The SN74ABT543APWLE from Texas Instruments is a registered bus transceiver Integrated Circuit with Element, Bit per Element and Output specifications.

The SN74ABT543DBLE from Texas Instruments is a registered bus transceiver Integrated Circuit.