Search results for “74ALVCH16601”

The 74ALVCH16601DGVRG4 from Texas Instruments is an 18-bit universal bus transceiver Integrated Circuit in a 56-TVSOP package.

The 74ALVCH16601DGG118 from NXP USA Inc. is a registered bus transceiver Integrated Circuit.

The 74ALVCH16601DGG112 from NXP USA Inc. is a registered bus transceiver Integrated Circuit.

SN74ALVCH16601DLR from Texas Instruments is a Integrated Circuit 18-bit universal bus transceiver with 3-state outputs - General-purpose transceivers. This 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V V CC operation. The SN74ALVCH16601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes. Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. The clock can be controlled by the clock-enable (CLKENAB and CLKENBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. Output enable OEAB is active low. When OEAB is low, the outputs are active. When OEAB is high, the outputs are in the high-impedance state. Data flow for B to A is similar to that of A to B, but uses OEBA, LEBA, CLKBA, and CLKENBA. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. The SN74ALVCH16601 is characterized for operation from -40°C to 85°C.

SN74ALVCH16601DL from Texas Instruments is a Integrated Circuit 18-bit universal bus transceiver with 3-state outputs - General-purpose transceivers. This 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V V CC operation. The SN74ALVCH16601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes. Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. The clock can be controlled by the clock-enable (CLKENAB and CLKENBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. Output enable OEAB is active low. When OEAB is low, the outputs are active. When OEAB is high, the outputs are in the high-impedance state. Data flow for B to A is similar to that of A to B, but uses OEBA, LEBA, CLKBA, and CLKENBA. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. The SN74ALVCH16601 is characterized for operation from -40°C to 85°C.

The 74ALVCH16601DGG512 from NXP USA Inc. is a registered bus transceiver.

SN74ALVCH16601DGGR from Texas Instruments is a Integrated Circuit 18-bit universal bus transceiver with 3-state outputs - General-purpose transceivers. This 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V V CC operation. The SN74ALVCH16601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes. Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. The clock can be controlled by the clock-enable (CLKENAB and CLKENBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. Output enable OEAB is active low. When OEAB is low, the outputs are active. When OEAB is high, the outputs are in the high-impedance state. Data flow for B to A is similar to that of A to B, but uses OEBA, LEBA, CLKBA, and CLKENBA. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. The SN74ALVCH16601 is characterized for operation from -40°C to 85°C.

The SN74ALVCH16601DGVR from Texas Instruments is a universal bus transceiver with 18 bits in a 56-TVSOP package.