Search results for “74ALVCH245”

The 74ALVCH245WMX from Fairchild Semiconductor is a non-inverting transceiver Integrated Circuit rated to 3.6 V, with 1 element, 8 bits per element, a 3-State output and a 20-SOIC package.

The 74ALVCH245WM from onsemi is a non-inverting transceiver Integrated Circuit with 1 element of 8 bits, 3-state output, rated at 3.6 V, in a 20-SOIC package.

The 74ALVCH245WMX from onsemi is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element and 3-state output, rated 3.6 V, in a 20-SOIC package.

The SN74ALVCH245NSRE4 from Texas Instruments is a non-inverting transceiver Integrated Circuit rated 3.6 V, in a 20-SO package.

The SN74ALVCH245DW from Texas Instruments is a non-inverting transceiver Integrated Circuit with 1 element, 8 bits per element and 3-state output, rated 3.6 V, in a 20-SOIC package.

The SN74ALVCH245NSR from Texas Instruments is a non-inverting transceiver Integrated Circuit rated 3.6 V, in a 20-SO package.

SN74ALVCH245PWR from Texas Instruments is a Integrated Circuit Octal Bus Transceiver With 3-State Outputs - General-purpose transceivers. This octal bus transceiver is designed for 1.65-V to 3.6-V V CC operation. The SN74ALVCH245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

The SN74ALVCH245DWR from Texas Instruments is a non-inverting transceiver rated 3.6 V, in a 20-SOIC package.

The SN74ALVCH245DGVR from Texas Instruments is a non-inverting transceiver Integrated Circuit rated to 3.6 V, in a 20-TVSOP package.

The SN74ALVCH245NSRG4 from Texas Instruments is a non-inverting transceiver rated 3.6 V, with 1 element, 8 bits per element and 3-state outputs, in a 20-SO package.

SN74ALVCH245PW from Texas Instruments is a Integrated Circuit Octal Bus Transceiver With 3-State Outputs - General-purpose transceivers. This octal bus transceiver is designed for 1.65-V to 3.6-V V CC operation. The SN74ALVCH245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.