Search results for “74lvth”
Products
74LVTH162245GRE4
Texas Instruments74LVTH162245GRE4 from Texas Instruments is a 3.3-V ABT 16-Bit Bus Transceivers With 3-State Outputs - General-purpose transceivers. The 'LVTH162245 devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) V CC operation, but with the capability to provide a TTL interface to a 5-V system environment. These devices can be used as two 8-bit transceivers or one 16-bit transceiver. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses are effectively isolated. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. The A-port outputs, which are designed to source or sink up to 12 mA, include equivalent 22- series resistors to reduce overshoot and undershoot. When V CC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. These devices are fully specified for hot-insertion applications using I off and power-up 3-state. The I off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
View full details74LVTH162374ZQLR
Texas InstrumentsThe 74LVTH162374ZQLR from Texas Instruments is a D-type flip-flop Integrated Circuit with 2 elements, 8 bits per element and positive-edge triggering, in a 56-VFBGA package.
View full details74LVTH16835DLRG4
Texas InstrumentsThe 74LVTH16835DLRG4 from Texas Instruments is an 18-bit universal bus driver in a 56-SSOP package.
View full details74LVTH16500DLRG4
Texas InstrumentsThe 74LVTH16500DLRG4 from Texas Instruments is an 18-bit universal bus transceiver Integrated Circuit in a 56-SSOP package.
View full details74LVTH322374ZKER
Texas InstrumentsThe 74LVTH322374ZKER from Texas Instruments is a quad D-type flip-flop Integrated Circuit with 4 elements of 8 bits each and positive edge triggering, in a 96-LFBGA package.
View full details74LVTH162374ZRDR
Texas InstrumentsThe 74LVTH162374ZRDR from Texas Instruments is a 2-element D-type flip-flop with 8-bit positive edge operation, in a 54-TFBGA package.
View full details74LVTH162374DGGRG4
Texas InstrumentsThe 74LVTH162374DGGRG4 from Texas Instruments is a dual D-type flip-flop Integrated Circuit with 2 elements of 8 bits each and positive edge triggering, in a 48-TFSOP (0.240", 6.10 mm width) package.
View full details74LVTH16501DLRG4
Texas InstrumentsThe 74LVTH16501DLRG4 from Texas Instruments is a universal bus transceiver with 18 bits, in a 56-SSOP package.
View full details74LVTH162374GRDR
Texas InstrumentsThe 74LVTH162374GRDR from Texas Instruments is a dual 8-bit D-type flip-flop Integrated Circuit in a 54-BGA package.
View full details74LVTH18511DGGRE4
Texas InstrumentsThe 74LVTH18511DGGRE4 from Texas Instruments is an 18-bit universal bus transceiver Integrated Circuit in a 64-TSSOP package.
View full details74LVTH18502APMRG4
Texas InstrumentsThe 74LVTH18502APMRG4 from Texas Instruments is an ABT scan test device with universal bus transceivers, in a 64-LQFP (10x10) package.
View full details74LVTH162373MEX
Fairchild SemiconductorThe 74LVTH162373MEX from Fairchild Semiconductor is a D-type transparent latch Integrated Circuit with 2 channels, an 8:8 configuration and tri-state output, in a 48-SSOP package, from the LVT series.
View full details74LVTH373MTCX
Fairchild SemiconductorThe 74LVTH373MTCX from Fairchild Semiconductor is a D-type transparent latch Integrated Circuit with 1 channel, 8:8 configuration and tri-state output, in a 20-TSSOP package.
View full details74LVTH573MSA
Fairchild SemiconductorThe 74LVTH573MSA from Fairchild Semiconductor is an LVT series D-type transparent latch Integrated Circuit with 1 channel, 8:8 configuration and tri-state outputs, in a 20-SSOP package.
View full details74LVTH322373GX
Fairchild SemiconductorThe 74LVTH322373GX from Fairchild Semiconductor is an LVT series bus driver with a D-type transparent latch, 4 channels, 8:8 bits and tri-state output, in a 96-FBGA (13.5 x 5.5) package.
View full details74LVTH16373MTDX
Fairchild SemiconductorThe 74LVTH16373MTDX from Fairchild Semiconductor is a D-type transparent latch bus driver in the LVT series with 2 channels, an 8:8 configuration and tri-state output, in a 48-TSSOP package.
View full details74LVTH18511DGGRG4
Texas InstrumentsThe 74LVTH18511DGGRG4 from Texas Instruments is an 18-bit universal bus transceiver Integrated Circuit supplied in a 64-TSSOP package.
View full details74LVTH16835MTD
Fairchild SemiconductorThe 74LVTH16835MTD from Fairchild Semiconductor is an 18-bit universal bus driver from the LVT series, in a 56-TSSOP package.
View full details74LVTH373MTC
Fairchild SemiconductorThe 74LVTH373MTC from Fairchild Semiconductor is a D-type transparent latch Integrated Circuit with 1 channel, 8:8 configuration and tri-state output, in a 20-TSSOP package.
View full details74LVTH125D,118
Nexperia USA Inc.The 74LVTH125D,118 from Nexperia USA Inc. is a non-inverting buffer Integrated Circuit with 4 elements of 1 bit each, 3-state outputs and a 3.6 V rating, in a 14-SO package.
View full details74LVTH373SJ
onsemiThe 74LVTH373SJ from onsemi is a D-type transparent latch with 1 channel, 8:8 configuration and tri-state outputs, in a 20-SOP package.
View full details74LVTH373WMX
Fairchild SemiconductorThe 74LVTH373WMX from Fairchild Semiconductor is a D-type transparent latch with 1 channel, 8:8 bits and tri-state output, in a 20-SOIC package.
View full details74LVTH162373MTX
Fairchild SemiconductorThe 74LVTH162373MTX from Fairchild Semiconductor is a D-type transparent latch with 2 channels, 8:8 bits and tri-state output, in a 48-TSSOP package.
View full details74LVTH16374ABQ,518
NXP USA Inc.The 74LVTH16374ABQ,518 from NXP USA Inc. is a dual 8-bit D-type flip-flop Integrated Circuit with 2 elements and positive edge triggering, in a 60-XFQFN package with dual rows and an exposed pad.
View full details74LVTH373SJ
Fairchild SemiconductorThe 74LVTH373SJ from Fairchild Semiconductor is a D-type transparent latch with 1 channel, 8:8 bits and tri-state output, in a 20-SOP package.
View full details74LVTH573WM
Fairchild SemiconductorThe 74LVTH573WM from Fairchild Semiconductor is an LVT series bus driver Integrated Circuit.
View full details74LVTH373WM
Fairchild SemiconductorThe 74LVTH373WM from Fairchild Semiconductor is a D-type transparent latch with 1 channel and an 8:8 configuration, with a tri-state output, in a 20-SOIC package, from the LVT bus driver series.
View full details74LVTH573SJ
onsemiThe 74LVTH573SJ from onsemi is a transparent octal latch with 3-state outputs in a 20-SOP package.
View full details74LVTH16373MEA
Fairchild SemiconductorThe 74LVTH16373MEA from Fairchild Semiconductor is a D-type transparent latch with 2 channels in an 8:8 configuration, tri-state output, in a 48-SSOP package.
View full details74LVTH16374MEA
Fairchild SemiconductorThe 74LVTH16374MEA from Fairchild Semiconductor is a dual D-type flip-flop Integrated Circuit with 2 elements, 8 bits per element and positive-edge triggering, in a 48-BSSOP (0.295", 7.50 mm width) package.
View full details74LVTH2952DGVRG4
Texas InstrumentsThe 74LVTH2952DGVRG4 from Texas Instruments is a non-inverting transceiver with 1 element of 8 bits, 3-state outputs, a 3.6 V rating, in a 24-TVSOP package.
View full details74LVTH16245ADLRG4
Texas Instruments74LVTH16245ADLRG4 from Texas Instruments is a Integrated Circuit 3.3-V ABT 16-Bit Bus Transceivers With 3-State Outputs - General-purpose transceivers. The 'LVTH16245A devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) V CC operation, but with the capability to provide a TTL interface to a 5-V system environment. The devices are designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. When V CC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. These devices are fully specified for hot-insertion applications using I off and power-up 3-state. The I off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
View full details74LVTH162373MTD
Fairchild SemiconductorThe 74LVTH162373MTD from Fairchild Semiconductor is a D-type transparent latch with 2 channels, 8:8 bits and tri-state output, in a 48-TSSOP package.
View full details74LVTH574WMX
Fairchild SemiconductorThe 74LVTH574WMX from Fairchild Semiconductor is an 8-bit D-type flip-flop Integrated Circuit with 1 element and positive-edge triggering, in a 20-SOIC package (0.295" / 7.50 mm width).
View full details74LVTH573WMX
Fairchild SemiconductorThe 74LVTH573WMX from Fairchild Semiconductor is an LVT series D-type transparent latch Integrated Circuit with 1 channel, 8:8 configuration and tri-state outputs, in a 20-SOIC package.
View full details74LVTH182504APMG4
Texas InstrumentsThe 74LVTH182504APMG4 from Texas Instruments is an ABT scan test device with universal bus transceivers, 20 bits, in a 64-LQFP (10x10) package.
View full details74LVTH16244ADGGRE4
Texas InstrumentsThe 74LVTH16244ADGGRE4 from Texas Instruments is a non-inverting buffer Integrated Circuit with 4 elements, 4 bits per element and 3-state output, rated 3.6 V, in a 48-TSSOP package.
View full details74LVTH162373MEA
Fairchild SemiconductorThe 74LVTH162373MEA from Fairchild Semiconductor is a D-type transparent latch with 2 channels, 8:8 bits and tri-state output, in a 48-SSOP package.
View full details74LVTH16245ADLG4
Texas Instruments74LVTH16245ADLG4 from Texas Instruments is a Integrated Circuit 3.3-V ABT 16-Bit Bus Transceivers With 3-State Outputs - General-purpose transceivers. The 'LVTH16245A devices are 16-bit (dual-octal) noninverting 3-state transceivers designed for low-voltage (3.3-V) V CC operation, but with the capability to provide a TTL interface to a 5-V system environment. The devices are designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports is always active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ. Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. When V CC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. These devices are fully specified for hot-insertion applications using I off and power-up 3-state. The I off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
View full details74LVTH125D,118
NXP SemiconductorsThe 74LVTH125D,118 from NXP Semiconductors is a non-inverting buffer Integrated Circuit rated at 3.6 V, in a 14-SO package.
View full details74LVTH125SJ
Fairchild SemiconductorThe 74LVTH125SJ from Fairchild Semiconductor is a non-inverting buffer with 4 elements of 1 bit each and 3-state outputs, rated 3.6 V, in a 14-SOP package.
View full details74LVTH162244GRDR
Texas InstrumentsThe 74LVTH162244GRDR from Texas Instruments is a non-inverting buffer Integrated Circuit with 4 elements, 4 bits per element and 3-state output, rated 3.6 V, in a 54-BGA Microstar Junior (8x5.5) package.
View full details74LVTH374SJX
onsemiThe 74LVTH374SJX from onsemi is a single 8-bit D-type flip-flop Integrated Circuit in a 20-SOP package.
View full details74LVTH125BQ,115
NXP USA Inc.The 74LVTH125BQ,115 from NXP USA Inc. is a non-inverting buffer rated 3.6 V with 4 elements, 1 bit per element and 3-state output, in a 14-DHVQFN (2.5x3) package.
View full details74LVTH244BPW,118
NXP USA Inc.The 74LVTH244BPW,118 from NXP USA Inc. is a non-inverting buffer rated 3.6 V with 2 elements, 4 bits per element and 3-state output, in a 20-TSSOP package.
View full details74LVTH574MSA
Fairchild SemiconductorThe 74LVTH574MSA from Fairchild Semiconductor is a single D-type flip-flop Integrated Circuit with 1 element, 8 bits and positive-edge triggering, in a 20-SSOP package (0.209" / 5.30 mm width).
View full details74LVTH162245ZRDR
Texas InstrumentsThe 74LVTH162245ZRDR from Texas Instruments is a non-inverting transceiver Integrated Circuit with 2 elements of 8 bits each and 3-state outputs, rated at 3.6 V, in a 54-BGA Microstar Junior (8x5.5) package.
View full details74LVTH16501DGGRE4
Texas Instruments74LVTH16501DGGRE4 from Texas Instruments is a Integrated Circuit 3.3-V ABT 18-Bit Universal Bus Transceivers With 3-State Outputs - General-purpose transceivers. The ’LVTH16501 devices are 18-bit universal bus transceivers designed for low-voltage (3.3-V) V CC operation, but with the capability to provide a TTL interface to a 5-V system environment. Data flow in each direction is controlled by output-enable (OEAB and OEBA), latch-enable (LEAB and LEBA), and clock (CLKAB and CLKBA) inputs. For A-to-B data flow, the devices operate in the transparent mode when LEAB is high. When LEAB is low, the A data is latched if CLKAB is held at a high or low logic level. If LEAB is low, the A data is stored in the latch/flip-flop on the low-to-high transition of CLKAB. When OEAB is high, the outputs are active. When OEAB is low, the outputs are in the high-impedance state. Data flow for B to A is similar to that of A to B but uses OEBA, LEBA, and CLKBA. The output enables are complementary (OEAB is active high and OEBA is active low). Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended. When V CC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE should be tied to V CC through a pullup resistor and OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sinking/current-sourcing capability of the driver. These devices are fully specified for hot-insertion applications using I off and power-up 3-state. The I off circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
View full details