Search results for “CD4541”

The CD4541BMTG4 from Texas Instruments is a programmable timer and oscillator Integrated Circuit at 100 kHz, in a 14-SOIC package.

The CD4541BNSR from Texas Instruments is a programmable timer Integrated Circuit with a 100 kHz frequency, in a 14-SO package.

The CD4541BNSRG4 from Texas Instruments is a programmable timer and oscillator Integrated Circuit rated 100 kHz, in a 14-SO package.

The CD4541BMT from Texas Instruments is a programmable timer and oscillator Integrated Circuit with a 100 kHz frequency in a 14-SOIC package.

The CD4541BE from Texas Instruments is a programmable timer and oscillator Integrated Circuit with a 100 kHz rating, in a 14-DIP package.

The CD4541BPWRG4 from Texas Instruments is a programmable timer Integrated Circuit rated at 100 kHz, in a 14-TSSOP package.

The CD4541BPW from Texas Instruments is a programmable timer and oscillator Integrated Circuit with a 100 kHz frequency in a 14-TSSOP package.

The CD4541BM96 from Texas Instruments is a programmable timer and oscillator Integrated Circuit rated at 100 kHz, in a 14-SOIC package.

The CD4541BM96G4 from Texas Instruments is a programmable timer Integrated Circuit rated at 100 kHz in a 14-SOIC package.

The CD4541BM from Texas Instruments is a programmable timer Integrated Circuit rated at 100 kHz, in a 14-SOIC package.

The CD4541BPWR from Texas Instruments is a programmable timer Integrated Circuit rated 100 kHz, in a 14-TSSOP package.

The CD4541BM96E4 from Texas Instruments is a programmable timer Integrated Circuit with a 100 kHz frequency, in a 14-SOIC package.

The CD4541BCM from onsemi is a programmable timer and oscillator Integrated Circuit rated 100 kHz in a 14-SOIC package.

The CD4541BCN from onsemi is a programmable timer and oscillator Integrated Circuit rated 100 kHz, in a 14-MDIP package.

The CD4541BCMX from onsemi is a programmable timer and oscillator Integrated Circuit rated at 100 kHz, in a 14-SOIC package.

The CD4541BNS from Texas Instruments is a programmable timer Integrated Circuit rated at 100 kHz, in a 14-SO package.

CD4541BF from Texas Instruments is a CMOS Programmable Timer - High Voltage Type (20V Rating) - Specialty logic ICs. CD4541B programmable timer consists of a 16-stage binary counter, an oscillator that is controlled by external R-C components (2 resistors and a capacitor), an automatic power-on reset circuit, and output control logic. The counter increments on positive-edge clock transitions and can also be reset via the MASTER RESET input. The output from this timer is the Q or Q output from the 8th, 10th, 13th, or 16th counter stage. The desired stage is chosen using time-select inputs A and B (see Frequency Select Table). The output is available in either of two modes selectable via the MODE input, pin 10 (see Truth Table). When this MODE input is a logic "1", the output will be a continuous square wave having a frequency equal to the oscillator frequency divided by 2 N. With the MODE input set to logic "0" and after a MASTER RESET is initiated, the output (assuming Q output has been selected) changes from a low to a high state after 2 N-1 counts and remains in that state until another MASTER RESET pulse is applied or the MODE input is set to a logic "1". Timing is initialized by setting the AUTO RESET input (pin 5) to logic "0" and turning power on. If pin 5 is set to logic "1", the AUTO RESET circuit is disabled and counting will not start until after a positive MASTER RESET pulse is applied and returns to a low level. The AUTO RESET consumes an appreciable amount of power and should not be used if low-power operation is desired. For reliable automatic power-on reset, V DD should be greater than 5V. The RC oscillator, shown in Figure 2, oscillates with a frequency determined by the RC network and is calculated using: Where f is between 1kHz and 100kHz and R S and 2R TC.

CD4541BEE4 from Texas Instruments is a CMOS Programmable Timer - High Voltage Type (20V Rating) - Specialty logic ICs. CD4541B programmable timer consists of a 16-stage binary counter, an oscillator that is controlled by external R-C components (2 resistors and a capacitor), an automatic power-on reset circuit, and output control logic. The counter increments on positive-edge clock transitions and can also be reset via the MASTER RESET input. The output from this timer is the Q or Q output from the 8th, 10th, 13th, or 16th counter stage. The desired stage is chosen using time-select inputs A and B (see Frequency Select Table). The output is available in either of two modes selectable via the MODE input, pin 10 (see Truth Table). When this MODE input is a logic "1", the output will be a continuous square wave having a frequency equal to the oscillator frequency divided by 2 N. With the MODE input set to logic "0" and after a MASTER RESET is initiated, the output (assuming Q output has been selected) changes from a low to a high state after 2 N-1 counts and remains in that state until another MASTER RESET pulse is applied or the MODE input is set to a logic "1". Timing is initialized by setting the AUTO RESET input (pin 5) to logic "0" and turning power on. If pin 5 is set to logic "1", the AUTO RESET circuit is disabled and counting will not start until after a positive MASTER RESET pulse is applied and returns to a low level. The AUTO RESET consumes an appreciable amount of power and should not be used if low-power operation is desired. For reliable automatic power-on reset, V DD should be greater than 5V. The RC oscillator, shown in Figure 2, oscillates with a frequency determined by the RC network and is calculated using: Where f is between 1kHz and 100kHz and R S and 2R TC.

CD4541BF3A from Texas Instruments is a CMOS Programmable Timer - High Voltage Type (20V Rating) - Specialty logic ICs. CD4541B programmable timer consists of a 16-stage binary counter, an oscillator that is controlled by external R-C components (2 resistors and a capacitor), an automatic power-on reset circuit, and output control logic. The counter increments on positive-edge clock transitions and can also be reset via the MASTER RESET input. The output from this timer is the Q or Q output from the 8th, 10th, 13th, or 16th counter stage. The desired stage is chosen using time-select inputs A and B (see Frequency Select Table). The output is available in either of two modes selectable via the MODE input, pin 10 (see Truth Table). When this MODE input is a logic "1", the output will be a continuous square wave having a frequency equal to the oscillator frequency divided by 2 N. With the MODE input set to logic "0" and after a MASTER RESET is initiated, the output (assuming Q output has been selected) changes from a low to a high state after 2 N-1 counts and remains in that state until another MASTER RESET pulse is applied or the MODE input is set to a logic "1". Timing is initialized by setting the AUTO RESET input (pin 5) to logic "0" and turning power on. If pin 5 is set to logic "1", the AUTO RESET circuit is disabled and counting will not start until after a positive MASTER RESET pulse is applied and returns to a low level. The AUTO RESET consumes an appreciable amount of power and should not be used if low-power operation is desired. For reliable automatic power-on reset, V DD should be greater than 5V. The RC oscillator, shown in Figure 2, oscillates with a frequency determined by the RC network and is calculated using: Where f is between 1kHz and 100kHz and R S and 2R TC.

The CD4541BE from Harris Corporation is a binary counter Integrated Circuit.

The CD4541BF from Harris Corporation is a programmable timer Integrated Circuit with a 6 MHz to 100 kHz range, in a 14-CDIP package.