Search results for “ConCept”

5MPA2506E from Electronic Concepts Inc. is a 50UF/3%/530VAC

5PT46M123M from Electronic Concepts Inc. is a .012UF/20%/1500VDC

DRILLSTOCK-A1 from H & H Innovative Concepts, LLC is a NEW Spring Flash Sale $37.99

SN74LVC2T45MDCTTEP from Texas Instruments is a Integrated Circuit Enhanced Product Dual-Bit Dual Supply Transceiver w/ Configurable Voltage Transl., 3-State Outputs - Voltage translators. This dual-bit noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track V CCA. V CCA accepts any supply voltage from 1.65 V to 5.5 V. The B port is designed to track V CCB. V CCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. The SN74LVC2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ. The SN74LVC2T45 is designed so that the DIR input circuit is supplied by V CCA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The V CC isolation feature ensures that if either V CC input is at GND, both ports are in the high-impedance state. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC2G53DCUTG4 from Texas Instruments is a Integrated Circuit 5V, 2:1 (SPDT), 1-channel, analog switch - Analog & precision switches & muxes. This single 2:1 analog multiplexer/demultiplexer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G53 device can handle both analog and digital signals. This device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74LVC2G80DCURG4 from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC1G74DCURG4 from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

TLC075CPWP from Texas Instruments is a Integrated Circuit Quad, 16-V, 10-MHz operational amplifier with shutdown functionality - General-purpose op amps. The first members of TI’s new BiMOS general-purpose operational amplifier family are the TLC07x. The BiMOS family concept is simple: provide an upgrade path for BiFET users who are moving away from dual-supply to single-supply systems and demand higher AC and dc performance. With performance rated from 4.5 V to 16 V across commercial (0°C to 70°C) and an extended industrial temperature range (-40°C to 125°C), BiMOS suits a wide range of audio, automotive, industrial and instrumentation applications. Familiar features like offset nulling pins, and new features like MSOP PowerPAD. packages and shutdown modes, enable higher levels of performance in a variety of applications. Developed in TI’s patented LBC3 BiCMOS process, the new BiMOS amplifiers combine a very high input impedance low-noise CMOS front end with a high-drive bipolar output stage, thus providing the optimum performance features of both. AC performance improvements over the TL07x BiFET predecessors include a bandwidth of 10 MHz (an increase of 300%) and voltage noise of 7 nV/√ Hz (an improvement of 60%). DC improvements include a factor of 4 reduction in input offset voltage down to 1.5 mV (maximum) in the standard grade, and a power supply rejection improvement of greater than 40 dB to 130 dB. Added to this list of impressive features is the ability to drive ±50-mA loads comfortably from an ultrasmall-footprint MSOP PowerPAD package, which positions the TLC07x as the ideal high-performance general-purpose operational amplifier family.

SN74LVC2G74DCTR from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AUP2G79DCUR from Texas Instruments is a Integrated Circuit Low-Power Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. The AUP family is TI’s premier solution to the industry's low-power needs in battery-powered portable applications. This family ensures a very low static- and dynamic-power consumption across the entire V CC range of 0.8 V to 3.6 V, resulting in increased battery life (see). This product also maintains excellent signal integrity. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoStar™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G74DCTRE4 from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G08DCUTG4 from Texas Instruments is a Integrated Circuit 2-ch, 2-input 1.65-V to 5.5-V 32 mA drive strength AND gate - AND gates. This dual 2-input positive-AND gate is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G08 device performs the Boolean function A × B or Y = A + B in positive logic. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. For all available packages, see the orderable addendum at the end of the data sheet.

SN74LVC2G53DCURG4 from Texas Instruments is a Integrated Circuit 5V, 2:1 (SPDT), 1-channel, analog switch - Analog & precision switches & muxes. This single 2:1 analog multiplexer/demultiplexer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G53 device can handle both analog and digital signals. This device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74LVC1G74DCUT from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G08DCTRE4 from Texas Instruments is a Integrated Circuit 2-ch, 2-input 1.65-V to 5.5-V 32 mA drive strength AND gate - AND gates. This dual 2-input positive-AND gate is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G08 device performs the Boolean function A × B or Y = A + B in positive logic. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. For all available packages, see the orderable addendum at the end of the data sheet.

SN74LVC2G79DCUR from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AVCH2T45DCUT from Texas Instruments is a Integrated Circuit Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation Aan 3-State Outputs - Voltage translators. This 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. The A ports are designed to track VCCA and accepts any supply voltage from 1.2V to 3.6V. The B ports are designed to track VCCB and accepts any supply voltage from 1.2V to 3.6V. This allows for universal low-voltage bidirectional translation and level-shifting between any of the 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes. The SN74AVCH2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR pin) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The SN74AVCH2T45 features active bus-hold circuitry, which holds unused or un-driven inputs at a valid logic state. TI does not recommend using pull-up or pull-down resistors with the bus-hold circuitry. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, then both outputs are in the high-impedance state. The bus-hold circuitry on the powered-up side always stays active. Active bus-hold circuitry holds unused or un-driven inputs at a valid logic state. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC2G53DCTR from Texas Instruments is a Integrated Circuit 5V, 2:1 (SPDT), 1-channel, analog switch - Analog & precision switches & muxes. This single 2:1 analog multiplexer/demultiplexer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G53 device can handle both analog and digital signals. This device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74LVC1G99DCUR from Texas Instruments is a Integrated Circuit Ultra-Configurable Multi-Function Gate With 3-State Outputs - Configurable gates. The SN74LVC1G99 device is operational from 1.65 V to 5.5 V. The SN74LVC1G99 device features configurable multiple functions with a 3-state output. The output is disabled when the output-enable (OE) input is high. When OE is low, the output state is determined by 16 patterns of 4-bit input. The user can choose logic functions, such as MUX, AND, OR, NAND, NOR, XOR, XNOR, inverter, and buffer. All inputs can be connected to V CC or GND. This device functions as an independent inverter, but because of Schmitt action, it has different input threshold levels for positive-going (V T+) and negative-going (V T-) signals. To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. NanoFree™ package technologies are a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC2G66DCURG4 from Texas Instruments is a Integrated Circuit 5V, 1:1 (SPST), 2-channel, analog switch - Analog & precision switches & muxes. This dual bilateral analog switch is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G66 device can handle both analog and digital signals. The SN74LVC2G66 device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Each switch section has its own enable-input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74LVC2G66DCUTE4 from Texas Instruments is a Integrated Circuit 5V, 1:1 (SPST), 2-channel, analog switch - Analog & precision switches & muxes. This dual bilateral analog switch is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G66 device can handle both analog and digital signals. The SN74LVC2G66 device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Each switch section has its own enable-input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74LVC2G74DCTRG4 from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G74DCUTG4 from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G66DCUR from Texas Instruments is a Integrated Circuit 5V, 1:1 (SPST), 2-channel, analog switch - Analog & precision switches & muxes. This dual bilateral analog switch is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G66 device can handle both analog and digital signals. The SN74LVC2G66 device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Each switch section has its own enable-input control (C). A high-level voltage applied to C turns on the associated switch section. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74LVC2G86DCURG4 from Texas Instruments is a Integrated Circuit 2-ch, 2-input, 1.65-V to 5.5-V XOR (exclusive OR) gates - XOR (exclusive OR) gates. This dual 2-input exclusive-OR gate is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G86 performs the Boolean function Y = A ⊕ B or Y = A B + A B in positive logic. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A common application is as a true/complement element. If the input is low, the other input is reproduced in true form at the output. If the input is high, the signal on the other input is reproduced inverted at the output. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. An exclusive-OR gate has many applications, some of which can be represented better by alternative logic symbols.

SN74LVC2G79DCURG4 from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G74DCUT from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G74DCUR from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AVCH2T45DCURG4 from Texas Instruments is a Integrated Circuit Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation Aan 3-State Outputs - Voltage translators. This 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. The A ports are designed to track VCCA and accepts any supply voltage from 1.2V to 3.6V. The B ports are designed to track VCCB and accepts any supply voltage from 1.2V to 3.6V. This allows for universal low-voltage bidirectional translation and level-shifting between any of the 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes. The SN74AVCH2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR pin) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The SN74AVCH2T45 features active bus-hold circuitry, which holds unused or un-driven inputs at a valid logic state. TI does not recommend using pull-up or pull-down resistors with the bus-hold circuitry. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, then both outputs are in the high-impedance state. The bus-hold circuitry on the powered-up side always stays active. Active bus-hold circuitry holds unused or un-driven inputs at a valid logic state. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC1G74DCUR from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC3G07DCUTG4 from Texas Instruments is a Integrated Circuit 3-ch, 1.65-V to 5.5-V buffers with open-drain outputs - Noninverting buffers & drivers. This triple buffer/driver is designed for 1.65-V to 5.5-V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. The output of the SN74LVC3G07 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AUC2G66DCURG4 from Texas Instruments is a Integrated Circuit 2.5V, 1:1 (SPST), 2-channel, analog switch - Analog & precision switches & muxes. This dual analog switch is operational at 0.8-V to 2.7-V V CC, but is designed specifically for 1.1-V to 2.7-V V CC operation. The SN74AUC2G66 can handle both analog and digital signals. It permits signals with amplitudes of up to 2.7-V (peak) to be transmitted in either direction. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

SN74AUC2G53DCURG4 from Texas Instruments is a Integrated Circuit 2.5V, 2:1 (SPDT), 1-channel, analog switch - Analog & precision switches & muxes. This analog switch is operational at 0.8-V to 2.7-V V CC, but is designed specifically for 1.1-V to 2.7-V V CC operation. The SN74AUC2G53 can handle both analog and digital signals. The device permits signals with amplitudes of up to V CC (peak) to be transmitted in either direction. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

1983880000 from Weidmuller is a HDC CFM 16 5F

74AVCH2T45DCTTE4 from Texas Instruments is a Dual-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation Aan 3-State Outputs - Voltage translators. This 2-bit non-inverting bus transceiver uses two separate configurable power-supply rails. The A ports are designed to track VCCA and accepts any supply voltage from 1.2V to 3.6V. The B ports are designed to track VCCB and accepts any supply voltage from 1.2V to 3.6V. This allows for universal low-voltage bidirectional translation and level-shifting between any of the 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V voltage nodes. The SN74AVCH2T45 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR pin) input activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The SN74AVCH2T45 features active bus-hold circuitry, which holds unused or un-driven inputs at a valid logic state. TI does not recommend using pull-up or pull-down resistors with the bus-hold circuitry. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature ensures that if either VCC input is at GND, then both outputs are in the high-impedance state. The bus-hold circuitry on the powered-up side always stays active. Active bus-hold circuitry holds unused or un-driven inputs at a valid logic state. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package.

SN74LVC2G79DCTR from Texas Instruments is a Integrated Circuit Dual Positive-Edge-Triggered D-Type Flip-Flop - D-type flip-flops. This dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. When data at the data (D) input meets the setup time requirement, the data is transferred to the Q output on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74AUC2G126DCUR from Texas Instruments is a Integrated Circuit 2-ch, 0.8-V to 2.7-V high speed buffers with 3-state outputs - Noninverting buffers & drivers. This dual bus buffer gate is operational at 0.8-V to 2.7-V V CC, but is designed specifically for 1.65-V to 1.95-V V CC operation. The SN74AUC2G126 is a dual bus driver/line driver with 3-state outputs. The outputs are disabled when the associated output-enable (OE) input is low. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. For more information about AUC Little Logic devices, please refer to the TI application report, Applications of Texas Instruments AUC Sub-1-V Little Logic Devices, literature number SCEA027.

TXB0102DCURG4 from Texas Instruments is a Integrated Circuit 2-Bit Bidirectional Voltage-Level Shifter with Auto Direction Sensing and +/-15-kV ESD Protect - Voltage translators. The TXB0102 device is a 2-bit noninverting translator that uses two separate configurable power-supply rails. The A port is designed to track V CCA. V CCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track V CCB. V CCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. V CCA must not exceed V CCB. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs when the device is powered down. This inhibits current backflow into the device which prevents damage to the device. OE must be tied to GND through a pulldown resistor to assure the high-impedance state during power up or power down; the minimum value of the resistor is determined by the current-sourcing capability of the driver. NanoFree™ technology is a major breakthrough in IC packaging concepts, using the die as the package.

LM3150MHX/NOPB from Texas Instruments is a Integrated Circuit 6V to 42V Synchronous Step-Down Controller with Adjustable Output Voltage - DC/DC controllers. The LM3150 SIMPLE SWITCHER ® controller is an easy-to-use and simplified step-down power controller capable of providing up to 12 A of output current in a typical application. Operating with an input voltage range of 6 V to 42 V, the LM3150 controller features an adjustable output voltage down to 0.6 V. The switching frequency is adjustable up to 1 MHz and the synchronous architecture provides for highly efficient designs. The LM3150 controller employs a constant on-time (COT) architecture with a proprietary emulated ripple mode (ERM) control that allows for the use of low ESR output capacitors, which reduces overall solution size and output voltage ripple. The COT regulation architecture allows for fast transient response and requires no loop compensation, which reduces external component count and reduces design complexity. Fault protection features such as thermal shutdown, undervoltage lockout, overvoltage protection, short-circuit protection, current limit, and output voltage prebias start-up allow for a reliable and robust solution. The LM3150 concept provides for an easy-to-use complete design using a minimum number of external components and TI’s WEBENCH online design tool. WEBENCH provides design support for every step of the design process and includes features such as external component calculation with a new MOSFET selector, electrical simulation, thermal simulation, and Build-It boards for prototyping.

SN74LVC2G53DCUT from Texas Instruments is a Integrated Circuit 5V, 2:1 (SPDT), 1-channel, analog switch - Analog & precision switches & muxes. This single 2:1 analog multiplexer/demultiplexer is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G53 device can handle both analog and digital signals. This device permits signals with amplitudes of up to 5.5 V (peak) to be transmitted in either direction. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.

LM3152MH-3.3/NOPB from Texas Instruments is a Integrated Circuit 42V Synchronous Step-Down Controller with 3.3V Output and 500kHz Switching Frequency - DC/DC controllers. The LM3151/2/3 SIMPLE SWITCHER ® Controller is an easy to use and simplified step down power controller capable of providing up to 12A of output current in a typical application. Operating with an input voltage range from 6V-42V, the LM3151/2/3 features a fixed output voltage of 3.3V, and features switching frequencies of 250 kHz, 500 kHz, and 750 kHz. The synchronous architecture provides for highly efficient designs. The LM3151/2/3 controller employs a Constant On-Time (COT) architecture with a proprietary Emulated Ripple Mode (ERM) control that allows for the use of low ESR output capacitors, which reduces overall solution size and output voltage ripple. The Constant On-Time (COT) regulation architecture allows for fast transient response and requires no loop compensation, which reduces external component count and reduces design complexity. Fault protection features such as thermal shutdown, under-voltage lockout, over-voltage protection, short-circuit protection, current limit, and output voltage pre-bias startup allow for a reliable and robust solution. The LM3151/2/3 SIMPLE SWITCHER ® concept provides for an easy to use complete design using a minimum number of external components and National’s WEBENCH ® online design tool. WEBENCH ® provides design support for every step of the design process and includes features such as external component calculation with a new MOSFET selector, electrical simulation, thermal simulation, and Build-It boards for prototyping.

TLC074CPWP from Texas Instruments is a Integrated Circuit Quad, 16-V, 10-MHz operational amplifier - General-purpose op amps. The first members of TI’s new BiMOS general-purpose operational amplifier family are the TLC07x. The BiMOS family concept is simple: provide an upgrade path for BiFET users who are moving away from dual-supply to single-supply systems and demand higher AC and dc performance. With performance rated from 4.5 V to 16 V across commercial (0°C to 70°C) and an extended industrial temperature range (-40°C to 125°C), BiMOS suits a wide range of audio, automotive, industrial and instrumentation applications. Familiar features like offset nulling pins, and new features like MSOP PowerPAD. packages and shutdown modes, enable higher levels of performance in a variety of applications. Developed in TI’s patented LBC3 BiCMOS process, the new BiMOS amplifiers combine a very high input impedance low-noise CMOS front end with a high-drive bipolar output stage, thus providing the optimum performance features of both. AC performance improvements over the TL07x BiFET predecessors include a bandwidth of 10 MHz (an increase of 300%) and voltage noise of 7 nV/√ Hz (an improvement of 60%). DC improvements include a factor of 4 reduction in input offset voltage down to 1.5 mV (maximum) in the standard grade, and a power supply rejection improvement of greater than 40 dB to 130 dB. Added to this list of impressive features is the ability to drive ±50-mA loads comfortably from an ultrasmall-footprint MSOP PowerPAD package, which positions the TLC07x as the ideal high-performance general-purpose operational amplifier family.

SN74LVC1G74DCTR from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop With Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65-V to 5.5-V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G74DCUTE4 from Texas Instruments is a Integrated Circuit Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset - D-type flip-flops. This single positive-edge-triggered D-type flip-flop is designed for 1.65 V to 5.5 V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. A low level at the preset (PRE) or clear (CLR) input sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not related directly to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC3G04DCUT from Texas Instruments is a Integrated Circuit 3-ch, 1.65-V to 5.5-V inverters - Inverting buffers & drivers. This triple inverter is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC3G04 device performs the Boolean function Y = A. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC2G00DCUTG4 from Texas Instruments is a Integrated Circuit 2-ch, 2-input, 1.65-V to 5.5-V NAND gates - NAND gates. This dual 2-input positive-NAND gate is designed for 1.65-V to 5.5-V V CC operation. The SN74LVC2G00 device performs the Boolean function Y = A × B or Y = A + B in positive logic. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

SN74LVC3G07DCURG4 from Texas Instruments is a Integrated Circuit 3-ch, 1.65-V to 5.5-V buffers with open-drain outputs - Noninverting buffers & drivers. This triple buffer/driver is designed for 1.65-V to 5.5-V V CC operation. NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package. The output of the SN74LVC3G07 is open drain and can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.