Search results for “EM”

EM 221 from Bopla Enclosures is a BOX PLAS GRAY 7.874""L X 4.724""W

EM-8-TP from Hirose Electric Co Ltd is a EXTRACTION TOOL EM SERIES

PCE-EM 29 from PCE Instruments is a EMF Meter PCE-EM 29

EM 32-1B from Lascar Electronics is a ROUND LCD VOLTMETER

EM 217 F from Bopla Enclosures is a BOX PLAS GRAY 4.803""L X 4.724""W

EM 32-1B-LED from Lascar Electronics is a ROUND LED VOLTMETER

EM 212 from Bopla Enclosures is a BOX PLAS GRAY 3.937""L X 3.937""W

EM 247 LP from Bopla Enclosures is a BOX PLAS GRAY 11.811""L X 6.299""W

A22E-M-03-EMS from Omron Automation and Safety is a PUSH SWITCH 3PST-NC 10A 110V

EM-GK from Hirose Electric Co Ltd is a TOOL GUIDE KEY FOR EM SERIES

EMS-7600 from Sensaphone is a SENSAPHONE STRATUS EMS

PCE-EM 888 from PCE Instruments is a Environmental Tester PCE-EM 888

UC1843BHKU/EM from Texas Instruments is a RADIATION-HARDNESS-ASSURED (RHA)

EM-6050P from Soberton Inc. is a MIC COND ANLG OMNI -42DB 0.236""D

EM-6027P from Soberton Inc. is a MIC COND ANLG OMNI -43DB 0.236""D

PLXO-100-120 from EM Research is a 100 MHZ PHASE LOCKED CRYSTAL OSC

REF-10-133 from EM Research is a 10 MHZ REFERENCE OSCILLATOR

REF-100-124 from EM Research is a 100 MHZ REFERENCE OSCILLATOR

TMP9R00HKT/EM from Texas Instruments is a RADIATION HARDNESS ASSURED (RHA)

EM-36-W from O.C. White Co. is a LAMP MAGNIFIER 1.75X FLUORESCENT

TLK2711HFG/EM from Texas Instruments is a Integrated Circuit Radiation-tolerant, QML-V, 1.6 to 2.5Gbps transceiver - Other interfaces. The TLK2711-SP is a member of the WizardLink transceiver family of multigigabit transceivers, intended for use in ultra-high-speed bidirectional point-to-point data transmission systems. The TLK2711-SP supports an effective serial interface speed of 1.6Gbps to 2.5Gbps, providing up to 2Gbps of data bandwidth. The primary application of the TLK2711-SP is to provide high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50Ω. The transmission media can be printed circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment. This device can also be used to replace parallel data transmission architectures by providing a reduction in the number of traces, connector pins, and transmit/receive pins. Parallel data loaded into the transmitter is delivered to the receiver over a serial channel, which can be a coaxial copper cable, a controlled impedance backplane, or an optical link. It is then reconstructed into its original parallel format. It offers significant power and cost savings over parallel solutions, as well as scalability for higher data rates in the future. The TLK2711-SP performs parallel-to-serial and serial-to-parallel data conversion. The clock extraction functions as a physical layer (PHY) interface device. The serial transceiver interface operates at a maximum speed of 2.5Gbps. The transmitter latches 16-bit parallel data at a rate based on the supplied reference clock (TXCLK). The 16-bit parallel data is internally encoded into 20 bits using an 8-bit/10-bit (8b/10b) encoding format. The resulting 20-bit word is then transmitted differentially at 20× the reference clock (TXCLK) rate. The receiver section performs the serial-to-parallel conversion on the input data, synchronizing the resulting 20-bit wide parallel data to the recovered clock (RXCLK). It then decodes the 20-bit wide data using the 8-bit/10-bit decoding format resulting in 16 bits of parallel data at the receive data pins (RXD0-RXD15). The outcome is an effective data payload of 1.28Gbps to 2Gbps (16 bits data × the frequency). The TLK2711-SP is available in a 68-pin ceramic nonconductive tie-bar package (HFG). The TLK2711-SP provides an internal loopback capability for self-test purposes. Serial data from the serializer is passed directly to the deserializer, providing the protocol device with a functional self-check of the physical interface.

EM-36-B from O.C. White Co. is a LAMP MAGNIFIER 1.75X FLUORESCENT

EM-45-B from O.C. White Co. is a LAMP MAGNIFIER 1.75X FLUORESCENT

EM-45-W from O.C. White Co. is a LAMP MAGNIFIER 1.75X FLUORESCENT

LM7171NAD/EM from Texas Instruments is a PROTOTYPE

EM-6022 from Soberton Inc. is a MIC COND ANLG OMNI -42DB 0.236""D

LM6172NAB/EM from Texas Instruments is a Radiation-hardened, QML-V, Dual high-speed, low-power, low-distortion voltage feedback amplifiers - High-speed op amps (GBW ≥ 50 MHz). The LM6172 is a dual high speed voltage feedback amplifier. It is unity-gain stable and provides excellent DC and AC performance. With 100MHz unity-gain bandwidth, 3000V/μs slew rate and 50mA of output current per channel, the LM6172 offers high performance in dual amplifiers; yet it only consumes 2.3mA of supply current each channel. The LM6172 operates on ±15V power supply for systems requiring large voltage swings, such as ADSL, scanners and ultrasound equipment. It is also specified at ±5V power supply for low voltage applications such as portable video systems. The LM6172 is built with National's advanced VIP III (Vertically Integrated PNP) complementary bipolar process.

TPS7H1101AHKR/EM from Texas Instruments is a IC REG LINEAR POS ADJ 3A 16CFP

EMS-2537 from Pimoroni Ltd is a AXIDRAW SE/A3

EM 32-1900 from Lascar Electronics is a ROUND LCD NTC THERMOMETER

EM 207 LP from Bopla Enclosures is a BOX PLAS GRAY 3.228""L X 2.362""W

ADS1282HKV/EM from Texas Instruments is a Radiation-tolerant, QML-V, High-resolution analog-to-digital converter (ADC) - Precision ADCs. The ADS1282-SP is a radiation-tolerant extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (MUX). ADS1282-SP is suitable for the demanding needs of space applications providing ultra-precision performance while maintaining radiation tolerance suitable for a large variety of satellites, payloads, sensing and other harsh environment applications. The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters. The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√ Hz) and high input impedance, allowing easy interfacing to transducers over a wide range of gains. The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration. The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source. Together, the amplifier, modulator, and filter dissipate 30 mW. The ADS1282-SP is fully specified from -55°C to 125°C.

EM 221 F from Bopla Enclosures is a BOX PLAS GRAY 7.874""L X 4.724""W

HTMS-105-02-G-D-EM from Samtec Inc. is a Through-hole Micro Header, 0.050" x 0.100" Pitch — HTMS

CDCM7005HFG/EM from Texas Instruments is a Integrated Circuit Radiation-hardened, QML-V, 3.3V high-performance clock jitter cleaner and synchronizer - Clock jitter cleaners. The CDCM7005-SP is a high-performance, low phase noise and low skew clock synchronizer that synchronizes a VCXO (voltage controlled crystal oscillator) or VCO (voltage controlled oscillator) frequency to one of the two reference clocks. The programmable pre-divider M and the feedback-dividers N and P give a high flexibility to the frequency ratio of the reference clock to VC(X)O as VC(X)O_IN / PRI_REF = (N × P) / M or VC(X)O_IN / SEC_REF = (N × P) / M. VC(X)O_IN clock operates up to 2 GHz. Through the selection of external VC(X)O and loop filter components, the PLL loop bandwidth and damping factor can be adjust to meet different system requirements. The CDCM7005-SP can lock to one of two reference clock inputs (PRI_REF and SEC_REF), supports frequency hold-over mode and fast-frequency-locking for fail-safe and increased system redundancy. The outputs of the CDCM7005-SP are user definable and can be any combination of up to five LVPECL outputs or up to 10 LVCMOS outputs. The LVCMOS outputs are arranged in pairs (Y0A:Y0B, Y1A:Y1B, Ω), so that each pair has the same frequency. But each output can be separately inverted and disabled. The built in synchronization latches ensure that all outputs are synchronized for low output skew. All device settings, like outputs signaling, divider value, input selection, and many more, are programmable by SPI (3-wire serial peripheral interface). SPI allows individually control of the device settings. The device operates in a 3.3-V environment and is characterized for operation from -55°C to 125°C (T case).

EM-PC-133 from Hirose Electric Co Ltd is a CONNECTOR PIN 8.0MM TIN CRIMP

EM-F-7G from Banner Engineering Corporation is a SAFETY EXTENSION MODULE

HTMS-150-01-T-D-EM from Samtec Inc. is a Through-hole Micro Header, 0.050" x 0.100" Pitch — HTMS