Search results for “Explorer”
Products
EXPLORER-WSUB1G
RF SolutionsThe EXPLORER-WSUB1G from RF Solutions is a handheld spectrum analyzer covering 240 MHz to 960 MHz, with a USB port and battery included.
View full details114990811
Seeed Technology Co., LtdThe 114990811 from Seeed Technology Co., Ltd is a near field antenna (K) for spectrum analysis with the Radio Frequency Explorer.
View full details322100013
Seeed Technology Co., LtdThe 322100013 from Seeed Technology Co., Ltd is a blue spectrum analyzer protection boot for use with the Radio Frequency Explorer.
View full detailsADS1282HIPWR
Texas InstrumentsADS1282HIPWR from Texas Instruments is a Integrated Circuit Ultra-high-resolution 4-kSPS 2-channel delta-sigma ADC with PGA for seismic and energy exploration - Precision ADCs. The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments. The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters. The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√ Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains. The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration. The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source. Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from -40°C to +85°C, with a maximum operating range to +125°C.
View full detailsADS1282IPW
Texas InstrumentsADS1282IPW from Texas Instruments is a Integrated Circuit Ultra-high-resolution 4-kSPS 2-channel delta-sigma ADC with PGA for seismic and energy exploration - Precision ADCs. The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments. The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters. The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√ Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains. The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration. The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source. Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from -40°C to +85°C, with a maximum operating range to +125°C.
View full detailsMSP430FR4133IG56R
Texas InstrumentsMSP430FR4133IG56R from Texas Instruments is a Integrated Circuit 16 MHz MCU with 16KB FRAM, 2KB SRAM, 10-bit ADC, LCD, UART/SPI/I2C, IR logic, timer - Low-power MCUs. MSP430FR41xx ultra-low-power (ULP) microcontroller family supports low-cost LCD applications that benefit from an integrated 10-bit ADC such as remote controls, thermostats, smart meters, blood glucose monitors, and blood pressure monitors. The MCUs feature a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 10 µs. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The MSP430™ FRAM microcontroller platform combines uniquely embedded ferroelectric random access memory (FRAM) and a holistic ultra-low-power system architecture, allowing system designers to increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatile behavior of flash. MSP430FR41x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits for the MSP430FR41xx include the MSP-EXP430FR4133 LaunchPad™ development kit and the MSP-TS430PM64D 64-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. MSP430 MCUs are also supported by extensive online collateral, such as our housekeeping example series, MSP Academy training, and online support through the TI E2E™ support forums. For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family User’s Guide.
View full detailsMSP430FR4132IG56R
Texas InstrumentsMSP430FR4132IG56R from Texas Instruments is a Integrated Circuit 16 MHz MCU with 8KB FRAM, 1KB SRAM, 10-bit ADC, LCD, UART/SPI/I2C, IR logic, timer - Low-power MCUs. MSP430FR41xx ultra-low-power (ULP) microcontroller family supports low-cost LCD applications that benefit from an integrated 10-bit ADC such as remote controls, thermostats, smart meters, blood glucose monitors, and blood pressure monitors. The MCUs feature a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 10 µs. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The MSP430™ FRAM microcontroller platform combines uniquely embedded ferroelectric random access memory (FRAM) and a holistic ultra-low-power system architecture, allowing system designers to increase performance while lowering energy consumption. FRAM technology combines the low-energy fast writes, flexibility, and endurance of RAM with the nonvolatile behavior of flash. MSP430FR41x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits for the MSP430FR41xx include the MSP-EXP430FR4133 LaunchPad™ development kit and the MSP-TS430PM64D 64-pin target development board. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. MSP430 MCUs are also supported by extensive online collateral, such as our housekeeping example series, MSP Academy training, and online support through the TI E2E™ support forums. For complete module descriptions, see the MSP430FR4xx and MSP430FR2xx Family User’s Guide.
View full detailsMSP430I2041TPWR
Texas InstrumentsMSP430I2041TPWR from Texas Instruments is a Integrated Circuit 16-MHz metering AFE with 4 24-bit sigma-delta ADCs, 2 16-bit timers, 32KB Flash, 2KB RAM - Sensing MCUs. The Texas Instruments MSP430i204x, MSP430I203x and MSP430I202x microcontrollers (MCUs) are part of the MSP430™ Metrology and Monitoring portfolio. The architecture and integrated peripherals, combined with five extensive low-power modes, are optimized to achieve extended battery life in portable and battery-powered measurement applications. The devices feature a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the devices to wake up from low-power modes to active mode in less than 5 µs. The MSP430i204x MCUs include four high-performance 24-bit sigma-delta ADCs, two eUSCIs (one eUSCI_A module and one eUSCI_B module), two 16-bit timers, a hardware multiplier, and up to 16 I/O pins. The MSP430I203x MCUs include three high-performance 24-bit sigma-delta ADCs, two eUSCIs (one eUSCI_A module and one eUSCI_B module), two 16-bit timers, a hardware multiplier, and up to 16 I/O pins. The MSP430I202x MCUs include two high-performance 24-bit sigma-delta ADCs, two eUSCIs (one eUSCI_A module and one eUSCI_B module), two 16-bit timers, a hardware multiplier, and up to 16 I/O pins. Typical applications for these devices include energy measurement, analog and digital sensor systems, LED lighting, digital power supplies, motor controls, remote controls, thermostats, digital timers, and hand-held meters. The MSP430i204x, MSP430I203x and MSP430I202x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get your design started quickly. Development kits include the EVM430-I2040S evaluation module (EVM) for metering and the MSP-TS430RHB32A 100-pin target development board. The Energy Measurement Design Center for MSP430 MCUs is provided as a rapid development tool that enables energy measurement on these devices. TI also provides free MSP430Ware™ software, which is available as a component of Code Composer Studio™ IDE desktop and cloud versions within TI Resource Explorer. The MSP430 MCUs are also supported by extensive online collateral, training, and online support through the TI E2E™ support forums. For complete module descriptions, see the MSP430i2xx Family User’s Guide.
View full detailsADS1282IPWR
Texas InstrumentsADS1282IPWR from Texas Instruments is a Integrated Circuit Ultra-high-resolution 4-kSPS 2-channel delta-sigma ADC with PGA for seismic and energy exploration - Precision ADCs. The ADS1282 is an extremely high-performance, single-chip analog-to-digital converter (ADC) with an integrated, low-noise programmable gain amplifier (PGA) and two-channel input multiplexer (mux). The ADS1282 is suitable for the demanding needs of energy exploration and seismic monitoring environments. The converter uses a fourth-order, inherently stable, delta-sigma (ΔΣ) modulator that provides outstanding noise and linearity performance. The modulator is used either in conjunction with the on-chip digital filter, or can be bypassed for use with post processing filters. The flexible input MUX provides an additional external input for measurement, as well as internal self-test connections. The PGA features outstanding low noise (5 nV/√ Hz) and high input impedance, allowing easy interfacing to geophones and hydrophones over a wide range of gains. The digital filter provides selectable data rates from 250 to 4000 samples per second (SPS). The high-pass filter (HPF) features an adjustable corner frequency. On-chip gain and offset scaling registers support system calibration. The synchronization input (SYNC) can be used to synchronize the conversions of multiple ADS1282s. The SYNC input also accepts a clock input for continuous alignment of conversions from an external source. Together, the amplifier, modulator, and filter dissipate 25 mW. The ADS1282 is available in a compact TSSOP-28 package and is fully specified from -40°C to +85°C, with a maximum operating range to +125°C.
View full detailsVDV512-058
Klein Tools, Inc.The VDV512-058 from Klein Tools, Inc. is a continuity tester (BATT/CLR COMP).
View full details109990014
Seeed Technology Co., LtdThe 109990014 from Seeed Technology Co., Ltd is a handheld Radio Frequency analyzer covering 240 MHz to 960 MHz and 2.55 GHz.
View full details114990711
Seeed Technology Co., LtdThe 114990711 from Seeed Technology Co., Ltd is a 3.5 GHz loop Radio Frequency antenna covering 1 MHz to 7 GHz, with an SMA female connector mount.
View full detailsMR-BUGGY3-MIN
NXP USA Inc.The MR-BUGGY3-MIN from NXP USA Inc. is a minimum set of parts for a small mobile wheeled robotics buggy kit.
View full detailsEKK-EVALBOT
Texas InstrumentsThe EKK-EVALBOT from Texas Instruments is an EVALBOT robotics kit with an ARM and Keil LM3S9B92 controller.
View full detailsP0465
Terasic Inc.The P0465 from Terasic Inc. is a DE5A-NET Arria 10GX FPGA development kit.
View full detailsXCKU19P-L1FFVB2104I
AMDThe XCKU19P-L1FFVB2104I from AMD is a Virtex UltraScale+ (KINTEX UP LP) field-programmable gate array (FPGA) Integrated Circuit with 540 I/O in a 2104-BBGA (FCBGA) package, with figures 63753421 and 1842750.
View full detailsSEF28121ZHHAR
Texas InstrumentsThe SEF28121ZHHAR from Texas Instruments is a prototype product.
View full detailsSN1804044ZBHR
Texas InstrumentsThe SN1804044ZBHR from Texas Instruments is a prototype product.
View full detailsBQ771816DPJR
Texas InstrumentsThe BQ771816DPJR from Texas Instruments is a prototype product.
View full detailsUDOO-SK-USA
UDOOThe UDOO-SK-USA from UDOO is a starter kit for the USA.
View full detailsBQ771813DPJR
Texas InstrumentsThe BQ771813DPJR from Texas Instruments is a prototype product.
View full detailsBQ30421DBTR
Texas InstrumentsThe BQ30421DBTR from Texas Instruments is a prototype product.
View full detailsSN2851RUYR
Texas InstrumentsThe SN2851RUYR from Texas Instruments is a prototype product.
View full detailsBQ9000RSMT-L1
Texas InstrumentsThe BQ9000RSMT-L1 from Texas Instruments is a prototype product.
View full detailsROB-14342
SparkFun ElectronicsThe ROB-14342 from SparkFun Electronics is a robotic arm kit that includes an Arduino Mega 2560 with Arduino MEGA R3 shield, Grove uArm Studio, uArm Play, Arduino IDE, Python and ROS support.
View full detailsA/3K-R-EXPL
Automation Components, Inc.The A/3K-R-EXPL from Automation Components, Inc. is a 3,000 Ω (3k) NTC thermistor temperature sensor in a threaded cylinder housing for hazardous locations.
View full details807-484
WAGO CorporationThe 807-484 from WAGO Corporation is a Linux starter kit.
View full detailsCSD59950RWJ
Texas InstrumentsThe CSD59950RWJ from Texas Instruments is a prototype product.
View full detailsSN1603041DBVR
Texas InstrumentsThe SN1603041DBVR from Texas Instruments is a prototype product.
View full detailsBQ771615DPJT
Texas InstrumentsThe BQ771615DPJT from Texas Instruments is a prototype product.
View full detailsBQ30423DBT-R1
Texas InstrumentsThe BQ30423DBT-R1 from Texas Instruments is a prototype product.
View full detailsAFE8310DC3RVBR
Texas InstrumentsThe AFE8310DC3RVBR from Texas Instruments is a Radio Frequency Integrated Circuit.
View full detailsSN26100D0DRPT
Texas InstrumentsThe SN26100D0DRPT from Texas Instruments is a prototype product.
View full detailsSN61280EYFFR
Texas InstrumentsThe SN61280EYFFR from Texas Instruments is a prototype product.
View full detailsLM52835MMRNLR
Texas InstrumentsThe LM52835MMRNLR from Texas Instruments is a prototype product.
View full detailsSN562249DDCT
Texas InstrumentsThe SN562249DDCT from Texas Instruments is a prototype product.
View full detailsDRA403CIPTPQ1
Texas InstrumentsThe DRA403CIPTPQ1 from Texas Instruments is a prototype product.
View full detailsLP85591A3YFQR
Texas InstrumentsThe LP85591A3YFQR from Texas Instruments is a prototype product.
View full detailsA/AN-R-EXPL
Automation Components, Inc.The A/AN-R-EXPL from Automation Components, Inc. is a threaded cylinder NTC thermistor rated 10,000 Ω (10k), Type III.
View full detailsBQ20862DBTR
Texas InstrumentsThe BQ20862DBTR from Texas Instruments is a prototype product.
View full detailsSN89851W
Texas InstrumentsThe SN89851W from Texas Instruments is a prototype product.
View full detailsSN1710009RSHR
Texas InstrumentsThe SN1710009RSHR from Texas Instruments is a prototype product.
View full detailsPCODMIOZWC
Texas InstrumentsThe PCODMIOZWC from Texas Instruments is a prototype product.
View full detailsCSD59958QVM
Texas InstrumentsThe CSD59958QVM from Texas Instruments is a prototype product.
View full detailsSN5614LADDVR
Texas InstrumentsThe SN5614LADDVR from Texas Instruments is a prototype product.
View full detailsMAX98728DEV#
Analog Devices Inc./Maxim IntegratedThe MAX98728DEV# from Analog Devices Inc./Maxim Integrated is a development tool for the MAX98728 amplifier Integrated Circuit.
View full details1912C7137
Texas InstrumentsThe 1912C7137 from Texas Instruments is a prototype product.
View full detailsA/CP-R-EXPL
Automation Components, Inc.The A/CP-R-EXPL from Automation Components, Inc. is a 10,000 Ω (10k) NTC thermistor, Type II, in a cylindrical threaded package.
View full details