Search results for “HAL 200”

HAL 200-S from LEM USA Inc. is a SENSOR CURRENT HALL 200A AC/DC

The 530RB200M000DG from Skyworks Solutions Inc. is a 200 MHz standard crystal oscillator (XO) with LVPECL output at 2.5 V and enable/disable function, in a 6-SMD no-lead package.

The 200-616 from CH Products is an Eclipse yoke.

200.0065 from Lantronix, Inc. is a CABLE MOD 8P8C PLUG-PLUG 49.21

HAL880 DJ-K from TDK-Micronas GmbH is a SENSOR HALL EFFECT ANALOG 8SOIC

200 from Keystone Electronics is a BATT HOLDER D 4 CELL SOLDER LUG

The MQF326P33-200.000-1.0/-40+85 from Mercury United Electronics, Inc. is a 200 MHz temperature-compensated crystal oscillator (TCXO) with LVDS output at 3.3 V and an enable/disable function, in a 6-SMD no-lead package.

The AX7DAF1-200.0000 from Abracon LLC is a standard XO crystal oscillator at 200 MHz with LVDS output, 3.3 V supply, enable/disable function, in an 8-SMD no-lead package.

The AX7PAF1-200.0000T from Abracon LLC is a 200 MHz standard crystal oscillator (XO) with LVPECL output at 3.3 V, featuring enable/disable and an 8-SMD no-lead package.

200VXH1000MEFCSN25X45 from Rubycon is a ALUMIN CAP 1000UF 20% 200V SNAP

The 626L20003GMT from CTS-Frequency Controls is a 200 MHz standard crystal oscillator (XO) with LVDS output at 1.8 V and an enable/disable function, in a 6-SMD no-lead package.

C0805C222K2RACAUTO from KEMET is a CERAMIC CAP 2200PF 200V X7R 0805

C1206C201K8HACAUTO from KEMET is a CERAMIC CAP 1206 200PF 10V ULTRA STA

C322C103K2R5CA from KEMET is a CERAMIC CAP 10000PF 200V X7R RADIAL

C0805C681K2RAC7800 from KEMET is a CERAMIC CAP 680PF 200V X7R 0805

C323C622K2G5TA from KEMET is a CERAMIC CAP RAD 6.2NF 200V C0G 10%

C420C511G2G5TA7200 from KEMET is a CERAMIC CAP 510PF 200V C0G/NP0 AXIAL

C0805C109C2GAC7800 from KEMET is a CERAMIC CAP 1PF 200V NP0 0805

C0805C470K2GAC7800 from KEMET is a CERAMIC CAP 47PF 200V C0G/NP0 0805

C420C242J2G5TA7200 from KEMET is a CERAMIC CAP 2400PF 200V C0G AXIAL

C420C822G2G5TA7200 from KEMET is a CERAMIC CAP 8200PF 200V C0G AXIAL

TMS320VC5502GZZ200 from Texas Instruments is a Integrated Circuit Fixed-Point Digital Signal Processor - Audio & radar DSP SoCs. The TMS320VC5502 (5502) fixed-point digital signal processor (DSP) is based on the TMS320C55x™ DSP generation CPU processor core. The C55x™ DSP architecture achieves high performance and low power through increased parallelism and total focus on reduction in power dissipation. The CPU supports an internal bus structure that is composed of one program bus, three data read buses, two data write buses, and additional buses dedicated to peripheral and DMA activity. These buses provide the ability to perform up to three data reads and two data writes in a single cycle. In parallel, the DMA controller can perform data transfers independent of the CPU activity. The C55x™ CPU provides two multiply-accumulate (MAC) units, each capable of 17-bit × 17-bit multiplication in a single cycle. A central 40-bit arithmetic/logic unit (ALU) is supported by an additional 16-bit ALU. Use of the ALUs is under instruction set control, providing the ability to optimize parallel activity and power consumption. These resources are managed in the Address Unit (AU) and Data Unit (DU) of the C55x CPU. The C55x DSP generation supports a variable byte width instruction set for improved code density. The Instruction Unit (IU) performs 32-bit program fetches from internal or external memory and queues instructions for the Program Unit (PU). The Program Unit decodes the instructions, directs tasks to AU and DU resources, and manages the fully protected pipeline. Predictive branching capability avoids pipeline flushes on execution of conditional instructions. The 5502 peripheral set includes an external memory interface (EMIF) that provides glueless access to asynchronous memories like EPROM and SRAM, as well as to high-speed, high-density memories such as synchronous DRAM and synchronous burst RAM. Additional peripherals include UART, watchdog timer, and an I-Cache. Three full-duplex multichannel buffered serial ports (McBSPs) provide glueless interface to a variety of industry-standard serial devices, and multichannel communication with up to 128 separately enabled channels. The host-port interface (HPI) is a 8-/16-bit parallel interface used to provide host processor access to 32K words of internal memory on the 5502. The HPI can be configured in either multiplexed or non-multiplexed mode to provide glueless interface to a wide variety of host processors. The DMA controller provides data movement for six independent channel contexts without CPU intervention. Two general-purpose timers, eight dedicated general-purpose I/O (GPIO) pins, and analog phase-locked loop (APLL) clock generation are also included. The 5502 is supported by the industry's award-winning eXpress DSP™, Code Composer Studio™ Integrated Development Environment (IDE), DSP/BIOS™, Texas Instruments. algorithm standard, and the industry's largest third-party network. The Code Composer Studio™ IDE features code generation tools that include a C Compiler, Visual Linker, simulator, RTDX™, XDS510™ emulation device drivers, and evaluation modules. The 5502 is also supported by the C55x™ DSP Library, which features more than 50 foundational software kernels (FIR filters, IIR filters, FFTs, and various math functions) as well as chip and board support libraries.

C430C562F2G5TA from KEMET is a CERAMIC CAP 5600PF 200V C0G AXIAL

The SIT9120AI-2B2-33S200.000000 from SiTime is a 200 MHz standard XO oscillator with LVDS output at 3.3 V, featuring standby (power down), in a 6-SMD no-lead package.

The SIT9120AI-2B2-25S200.000000 from SiTime is a 200 MHz standard XO oscillator with LVDS output at 2.5 V, featuring standby (power down), in a 6-SMD no-lead package.

C0805C470J2GAC7800 from KEMET is a CERAMIC CAP 47PF 200V C0G/NP0 0805

C320C152K2R5TA from KEMET is a CERAMIC CAP 1500PF 200V X7R RADIAL

C320C103G2G5TA7301 from KEMET is a CERAMIC CAP 10000PF 200V C0G/NP0 RAD

C0805C152K2RECAUTO from KEMET is a CERAMIC CAP 0805 1.5NF 200V X7R

CL31B104KDHNNNE from Samsung Electro-Mechanics is a CERAMIC CAP 0.1UF 200V X7R 1206

C0805X103K2RECAUTO7210 from KEMET is a CERAMIC CAP 0805 10NF 200V X7R 10%

C1206X103J2REC7210 from KEMET is a CERAMIC CAP 1206 10NF 200V X7R 5%

C327C472F2G5TA7301 from KEMET is a CERAMIC CAP 4700PF 200V C0G/NP0 RAD

C1206X103J2RECAUTO7210 from KEMET is a CERAMIC CAP 1206 10NF 200V X7R 5%

C356C124K2G5TA from KEMET is a CERAMIC CAP RAD 120NF 200V C0G 10%

C410C561F2G5TA7200 from KEMET is a CERAMIC CAP 560PF 200V C0G/NP0 AXIAL

C1206C223J2RECAUTO from KEMET is a CERAMIC CAP 1206 22NF 200V X7R 5%

C1206C102F2GEC7210 from KEMET is a CERAMIC CAP 1206 1NF 200V C0G 1%

C430C362F2G5TA7200 from KEMET is a CERAMIC CAP 3600PF 200V C0G AXIAL

C1206X152J2GECAUTO from KEMET is a CERAMIC CAP 1206 1.5NF 200V C0G 5%

C317C132F2G5TA from KEMET is a CERAMIC CAP 1300PF 200V C0G/NP0 RAD

C1206X223M2GECAUTO7210 from KEMET is a CERAMIC CAP 1206 22NF 200V C0G 20%

2220J2000101KFT from Knowles Syfer is a CERAMIC CAP 100PF 200V C0G/NP0 2220