Search results for “HIT”

2SA1020-Y(HIT,F,M) from Toshiba Semiconductor and Storage is a PNP TRANSISTOR 50V 2A TO92MOD

2SC2655-Y(HIT,F,M) from Toshiba Semiconductor and Storage is a TRANS NPN 50V 2A TO92MOD

DL-HCM-HITEMP from Teledyne LeCroy is a DL-HCM SERIES HIGH-TEMPERATURE S

NC502-2 from ABB Power Electronics Inc. is a EP NC5022 3/4 INCH HIT LOCK CONN

HI-3001CRH from Holt Integrated Circuits Inc. is a IC TRANSCEIVER HALF 1/1 8CERDIP

80040 from Wiha is a HAMMER DEAD BLOW HICKORY

80050 from Wiha is a HAMMER DEAD BLOW HICKORY

SN74LV4066APWR-MX from Texas Instruments is a HIT CHIP/MTEX ASSY

SM320C6727BHFHM from Texas Instruments is a Military grade C6727B floating-point DSP - Audio & radar DSP SoCs. The SM320C6727B is the next generation of Texas Instruments’ C67x generation of high-performance 32-/64-bit floating-point digital signal processors. Enhanced C67x+ CPU. The C67x+ CPU is an enhanced version of the C67x CPU used on the C671x DSPs. It is compatible with the C67x CPU but offers significant improvements in speed, code density, and floating-point performance per clock cycle. The CPU natively supports 32-bit fixed-point, 32-bit single-precision floating-point, and 64-bit double-precision floating-point arithmetic. Efficient Memory System. The memory controller maps the large on-chip 256K-byte RAM and 384K-byte ROM as unified program/data memory. Development is simplified since there is no fixed division between program and data memory size as on some other devices. The memory controller supports single-cycle data accesses from the C67x+ CPU to the RAM and ROM. Up to three parallel accesses to the internal RAM and ROM from three of the following four sources are supported: Two 64-bit data accesses from the C67x+ CPU One 256-bit program fetch from the core and program cache One 32-bit data access from the peripheral system (either dMAX or UHPI) The large (32K-byte) program cache translates to a high hit rate for most applications. This prevents most program/data access conflicts to the on-chip memory. It also enables effective program execution from an off-chip memory such as an SDRAM. High-Performance Crossbar Switch. A high-performance crossbar switch acts as a central hub between the different bus masters (CPU, dMAX, UHPI) and different targets (peripherals and memory). The crossbar is partially connected; some connections are not supported (for example, UHPI-to-peripheral connections). Multiple transfers occur in parallel through the crossbar as long as there is no conflict between bus masters for a particular target. When a conflict does occur, the arbitration is a simple and deterministic fixed-priority scheme. The dMAX is given highest-priority since it is responsible for the most time-critical I/O transfers, followed next by the UHPI, and finally by the CPU. dMAX Dual Data Movement Accelerator. The dMAX is a module designed to perform Data Movement Acceleration. The Data Movement Accelerator (dMAX) controller handles user-programmed data transfers between the internal data memory controller and the device peripherals on the C6727B DSPs. The dMAX allows movement of data to/from any addressable memory space including internal memory, peripherals, and external memory. The dMAX controller includes features such as the capability to perform three-dimensional data transfers for advanced data sorting, and the capability to manage a section of the memory as a circular buffer/FIFO with delay-tap based reading and writing of data. The dMAX controller is capable of concurrently processing two transfer requests (provided that they are to/from different source/destinations). External Memory Interface (EMIF) for Flexibility and Expansion. The external memory interface on the C6727B supports a single bank of SDRAM and a single bank of asynchronous memory. The EMIF data width is 16 bits wide. SDRAM support includes x16 and x32 SDRAM devices with 1, 2, or 4 banks. The C6727B extends SDRAM support to 256M-bit and 512M-bit devices. Asynchronous memory support is typically used to boot from a parallel non-multiplexed NOR flash device that can be 8, 16, or 32 bits wide. Booting from larger flash devices than are natively supported by the dedicated EMIF address lines is accomplished by using general-purpose I/O pins for upper address lines. The asynchronous memory interface can also be configured to support 8- or 16-bit-wide NAND flash. It includes a hardware ECC calculation (for single-bit errors) that can operate on blocks of data up to 512 bytes. Universal Host-Port Interface (UHPI) for High-Speed Parallel I/O. The Universal Host-Port Interface (UHPI) is a parallel interface through which an external host CPU can access memories on the DSP. Three modes are supported by the C6727B UHPI: Multiplexed Address/Data - Half-Word (16-bit-wide) Mode (similar to C6713) Multiplexed Address/Data - Full Word (32-bit-wide) Mode Non-Multiplexed Mode - 16-bit Address and 32-bit Data Bus The UHPI can also be restricted to accessing a single page (64K bytes) of memory anywhere in the address space of the C6727B; this page can be changed, but only by the C6727B CPU. This feature allows the UHPI to be used for high-speed data transfers even in systems where security is an important requirement. The UHPI is only available on the C6727B. Multichannel Audio Serial Ports (McASP0, McASP1, and McASP2) - Up to 16 Stereo Channels I2S. The multichannel audio serial port (McASP) seamlessly interfaces to CODECs, DACs, ADCs, and other devices. It supports the ubiquitous IIS format as well as many variations of this format, including time division multiplex (TDM) formats with up to 32 time slots. Each McASP includes a transmit and receive section which may operate independently or synchronously; furthermore, each section includes its own flexible clock generator and extensive error-checking logic. As data passes through the McASP, it can be realigned so that the fixed-point representation used by the application code can be independent of the representation used by the external devices without requiring any CPU overhead to make the conversion. The McASP is a configurable module and supports between 2 and 16 serial data pins. It also has the option of supporting a Digital Interface Transmitter (DIT) mode with a full 384 bits of channel status and user data memory. Inter-Integrated Circuit Serial Ports (I2C0, I2C1). The C6727B includes two inter-integrated circuit (I2C) serial ports. A typical application is to configure one I2C serial port as a slave to an external user-interface microcontroller. The other I2C serial port may then be used by the C6727B DSP to control external peripheral devices, such as a CODEC or network controller, which are functionally peripherals of the DSP device. The two I2C serial ports are pin-multiplexed with the SPI0 serial port. Serial Peripheral Interface Ports (SPI0, SPI1). As in the case of the I2C serial ports, the C6727B DSP also includes two serial peripheral interface (SPI) serial ports. This allows one SPI port to be configured as a slave to control the DSP while the other SPI serial port is used by the DSP to control external peripherals. The SPI ports support a basic 3-pin mode as well as optional 4- and 5-pin modes. The optional pins include a slave chip-select pin and an enable pin which implements handshaking automatically in hardware for maximum SPI throughput. The SPI0 port is pin-multiplexed with the two I2C serial ports (I2C0 and I2C1). The SPI1 serial port is pin-multiplexed with five of the serial data pins from McASP0 and McASP1. Real-Time Interrupt Timer (RTI). The real-time interrupt timer module includes: Two 32-bit counter/prescaler pairs Two input captures (tied to McASP direct memory access [DMA] events for sample rate measurement) Four compares with automatic update capability Digital Watchdog (optional) for enhanced system robustness Clock Generation (PLL and OSC). The C6727B DSP includes an on-chip oscillator that supports crystals in the range of 12 MHz to 25 MHz. Alternatively, the clock can be provided externally through the CLKIN pin. The DSP includes a flexible, software-programmable phase-locked loop (PLL) clock generator. Three different clock domains (SYSCLK1, SYSCLK2, and SYSCLK3) are generated by dividing down the PLL output. SYSCLK1 is the clock used by the CPU, memory controller, and memories. SYSCLK2 is used by the peripheral subsystem and dMAX. SYSCLK3 is used exclusively for the EMIF.

HIN207IB from Harris Corporation is a RS-232 TRANSMITTER/RECIEVER

HIN201IB from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN202EIP from Harris Corporation is a RS-232 TRANSMITTER/RECEIVER

HIN240IN from Harris Corporation is a RS-232 TRANSMITTER/RECEIVER

HIN209CP from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN207ECP from Harris Corporation is a RS-232 TRANSMITTER/RECIEVER

HIN207EIP from Harris Corporation is a RS-232 TRANSMITTER/RECEIVER

HIN209CB from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN209IB from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN208CP from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN202IP from Harris Corporation is a RS-232 TRANSMITTER/RECEIVER

HI-3002PCTF from Holt Integrated Circuits Inc. is a IC TRANSCEIVER HALF 1/1 16QFN

HI-3002PCIF from Holt Integrated Circuits Inc. is a IC TRANSCEIVER HALF 1/1 16QFN

HIN206IB from Intersil is a RS-232 TRANSMITTERS/RECIEVERS

HIN203CP from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN236IP from Harris Corporation is a RS-232 TRANSMITTER/RECEIVER

HIN207CP from Harris Corporation is a RS-232 TRANSMITTER/RECIEVER

HIN230IB from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HI-3000CRH from Holt Integrated Circuits Inc. is a IC TRANSCEIVER HALF 1/1 8CERDIP

HIN206IB from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS

HIN203ECP from Harris Corporation is a RS-232 TRANSMITTERS/RECIEVERS