Search results for “High Power”

The High Voltage Power Supply AHV12V500V5MAW from Analog Technologies is an enclosed, non-isolated DC-DC converter with 1 output of 0 to 500 V at 2 mA, for a 13 V input.

The SDR-960-24 from MEAN WELL USA Inc. is an AC/DC DIN rail power supply rated 24 V and 960 W.

The CAS10KS07984 from Switchcraft Inc. is a high-amperage sealed DC power cable assembly with a plug (2.0 mm ID, 5.5 mm OD) to wire leads, round, 6.6 ft (2.00 m) long.

The C80 from XP Power is a high-voltage non-isolated module DC-DC converter with 1 output at 8000 V and 125 µA, operating from an 11.5 to 16 V input.

The G9KA-1A-E DC12 from Omron Electronics Inc-EMC Div is a general-purpose SPST-NO (1 Form A) power relay with a 12 VDC coil, rated 1000 VAC and 300 A, for through-hole mounting.

The NCP1618ADR2G from onsemi is a high-voltage multimode PFC controller Integrated Circuit for continuous conduction mode (CCM) at 65 kHz, in a 9-SOIC package.

The G9KA-1A-E DC24 from Omron Electronics Inc-EMC Div is a general-purpose SPST-NO (1 Form A) power relay with a 24 VDC coil, rated 1000 VAC and 300 A, for through-hole mounting.

The MAX14691ATP+ from Analog Devices Inc./Maxim Integrated is a general-purpose PMIC with a 6 A high-voltage power limiter function, in a 20-TQFN (5x5) package.

The MAX622ESA+ from Analog Devices Inc./Maxim Integrated is a high-side power supply Integrated Circuit in an 8-SOIC package.

The MIC94072YMT from Micrel Inc. is a high-side power switch with a 1:1 P-channel 1.2 A driver, in a 4-TMLF (1.2x1.6) package.

The LABMATE-N301 from Spruce Science is a bench power supply (AC to DC) with a 0 to 24 VDC output rated 2.5 A, with an LED display and programmable, regulated, switching features.

The NCP1618DDR2G from onsemi is a high-voltage multimode PFC controller Integrated Circuit for continuous conduction mode (CCM) operation at 65 kHz, in a 9-SOIC package.

The MIC94062BC6 from Micrel Inc. is a 1:1 power switch/driver with a P-channel high-side switch rated at 2 A, in an SC-70-6 package.

The MAX622ESA+T from Analog Devices Inc./Maxim Integrated is a high-side power supply Integrated Circuit in an 8-SOIC package.

The NCP1618BDR2G from onsemi is a high-voltage multimode power factor correction Integrated Circuit for continuous conduction (CCM) operation at 65 kHz, in a 9-SOIC package.

The MAX14693ATP+ from Analog Devices Inc./Maxim Integrated is a 6 A high-voltage power limiter with overvoltage and undervoltage protection in a 20-TQFN (5x5) package.

The NX5P2924BUK012 from Freescale Semiconductor is a logic-controlled high-side power switch/driver with 1:1 N-channel configuration, rated 2.5 A, in a 6-WLCSP (0.87x1.37) package.

The MC22XSD200BEK from Freescale Semiconductor is a dual high-side switch rated at 36 V and 22MO, configured as a 1:1 N-channel power switch/driver rated at 3 A, in a 32-HSOP package.

The IPS1025HFQ from STMicroelectronics is a high-efficiency, high-side power switch/driver with 1:1 N-channel configuration rated at 2.4 A, in a 48-QFN (8x6) package.

The MC16XSD200BFKR2 from NXP USA Inc. is a high-side power switch/driver rated at 3 A, in a 23-PQFN (12x12) package.

The NX3P190UK,012 from NXP USA Inc. is a high-side power switch/driver Integrated Circuit in a 4-WLCSP package.

TPS12110AQDGXRQ1 from Texas Instruments is a Automotive, 3.5V to 45V high-side driver with protection and diagnostics - High-side switch controllers. The TPS1211-Q1 family is a 45V, smart high-side driver with protection and diagnostics. With wide operating voltage range of 3.5V-40V, the device is suitable for 12V system designs. The device has a strong 3.7A peak source (PU) and 4A peak sink (PD) gate driver that enables power switching using parallel FETs in high-current system designs. Use INP as the gate driver control input. The device has accurate current sensing (±2% at 30mV) output (IMON) enabling system designs for energy management. The device has integrated two-level overcurrent protection with FLT_I output with complete adjustability of thresholds and response time. Auto-retry and latch-off fault behavior can be configured. The device features remote overtemperature protection with FLT_T output. The TPS12111-Q1 integrates a pre-charge driver (G) with control input (INP_G). This features enables designs that must drive large capacitive loads. In shutdown mode (EN/UVLO < 0.3V), the controller draws a total shutdown current of 0.9µA (typical). The TPS1211-Q1 is available in a 19-pin VSSOP package with a pin removed between adjacent high voltage and low voltage pins, providing 0.8mm clearance.

The KLDHCX-0202-A from Kycon, Inc. is a high-current power barrel jack with 2.00 mm ID (0.079") and 5.50 mm OD (0.217") for through-hole, right-angle mounting.

The AH60N-5 from XP Power is a 1.5 W board-mount DC-DC converter rated -6000 V.

The CA05N-5 from XP Power is a 1 W high-voltage non-isolated DC-DC converter module with 1 output at -500 V and 2 mA, accepting a 4.75 V to 5.25 V input.

The MIC94073YMT from Micrel Inc. is a high-side power switch with a 1:1 P-channel 1.2 A driver, in a 4-TMLF (1.2x1.6) package.

The CARAS10KS07984 from Switchcraft Inc. is a sealed high-amperage DC power cable assembly.

UMPT-10-01-S-RA-WT-TR from Samtec Inc. is a 2mm (.0787 Inch) Pitch High Power Blade Compact Wire to Board Shrouded Box Header Connectors, Vertical, Surface Mount (SMT) or Through Hole, Plastic Top or Metal Side Latching, 18 Amps, mPOWER® — UMPT

The 1739 from B&K Precision is a high-resolution bench AC-to-DC power supply with a 0 to 30 VDC output up to 999.9 mA, an LED display, and constant current and constant voltage indicators.

UMPT-08-01-T-RA-WT-TR from Samtec Inc. is a 2mm (.0787 Inch) Pitch High Power Blade Compact Wire to Board Shrouded Box Header Connectors, Vertical, Surface Mount (SMT) or Through Hole, Plastic Top or Metal Side Latching, 18 Amps, mPOWER® — UMPT

UMPT-06-01-L-RA-WT-P-TR from Samtec Inc. is a 2mm (.0787 Inch) Pitch High Power Blade Compact Wire to Board Shrouded Box Header Connectors, Vertical, Surface Mount (SMT) or Through Hole, Plastic Top or Metal Side Latching, 18 Amps, mPOWER® — UMPT

The MC22XSD200BEK-NXP from NXP USA Inc. is a dual high-side power switch/driver rated 36 V with 22MO.

The MR50040 from B&K Precision is a bench power supply with 0 to 500 VDC output, 0 to 40 A output and 5000 W power, with VFD display. Features include memory, programmable operation, and GPIB, LAN, RS232 and USB interfaces.

The MC34981ABHFK557 from NXP Semiconductors is a high-side power switch/driver Integrated Circuit.

The HRC0524S4K0N from XP Power is a 5 W non-isolated high-voltage DC-DC converter module with one output of 0 to -4000 V, 1.25 mA output current and a 22 V to 30 V input.

The HRC0524S6K0P from XP Power is a 5 W non-isolated high-voltage DC-DC converter module with 1 output from 0 to 6000 V and 830 µA, operating from a 22 V to 30 V input.

The BD2065AFJ-E2 from Rohm Semiconductor is a USB high-side power switch/driver with a 1:1 N-channel configuration rated at 1 A, in an 8-SOP-J package.

The BTS70902EPLXUMA1 from Infineon Technologies is a smart high-side power switch/driver with a 1:1 N-Channel configuration, in a PG-TSDSO-14-22 package.