Search results for “ISO7041”
Products
ISO7041FDBQR
Texas InstrumentsThe ISO7041FDBQR from Texas Instruments is a 4-channel digital isolator rated 3000 VRMS, GP type, in a 16-SSOP package.
View full detailsISO7041FQDBQRQ1
Texas InstrumentsThe ISO7041FQDBQRQ1 from Texas Instruments is a general-purpose 4-channel digital isolator (AUTOMOTIVE, 120-UA) rated 3000 Vrms, 4 Mbps and 50 kV/µs CMTI, in a 16-SSOP package 0.154" (3.90 mm) wide.
View full detailsISO7041QDBQRQ1
Texas InstrumentsThe ISO7041QDBQRQ1 from Texas Instruments is a general-purpose 4-channel digital isolator (AUTOMOTIVE, 120-UA) rated 3000 Vrms, 4 Mbps and 50 kV/µs CMTI, in a 16-SSOP package 0.154" (3.90 mm) wide.
View full detailsISO7041FDBQ
Texas InstrumentsISO7041FDBQ from Texas Instruments is a Ultra-low power, basic 4-channel, 3/1, digital isolator with 116uA/ch Icc and ATEX certification - Digital isolators. The ISO7041 device is an ultra-low power, multichannel digital isolator that can be used to isolate CMOS or LVCMOS digital I/Os. Each isolation channel has a logic input and output buffer separated by a double capacitive silicon dioxide (SiO 2) insulation barrier. Innovative edge based architecture combined with an ON-OFF keying modulation scheme allows these isolators to consume very-low power while meeting 3000-V RMS isolation rating per UL1577. The per channel dynamic current consumption of the device is under 120 µA/Mbps and the per channel static current consumption is 3.5 µA at 3.3 V, allowing for use of the ISO7041 in both power and thermal constrained system designs. The device can operate as low as 1.71 V, as high as 5.5 V, and is fully functional with different supply voltages on each side of isolation barrier. The four channel isolator comes in a 16-QSOP package with three forward-direction channels and one reverse-direction channel. The device has default output high and low options. If the input power or signal is lost, default output is high for the ISO7041 device without the suffix F and low for the ISO7041F device with the F suffix. See the Device Functional Modes section for more information.
View full detailsISO7041DBQR
Texas InstrumentsThe ISO7041DBQR from Texas Instruments is a 4-channel digital isolator rated 3000 VRMS, GP type, in a 16-SSOP package.
View full detailsISO7041ADBQ
Texas InstrumentsThe ISO7041ADBQ from Texas Instruments is a 4-channel SPI digital isolator rated 3000 Vrms, with 4 Mbps data rate, 50 kV/µs CMTI and a 16-SSOP (0.154", 3.90 mm width) package.
View full detailsISO7041FADBQ
Texas InstrumentsThe ISO7041FADBQ from Texas Instruments is a 4-channel SPI digital isolator rated 3000 Vrms, with 4 Mbps data rate, 50 kV/µs CMTI and a 16-SSOP (0.154", 3.90 mm width) package.
View full detailsISO7041FADBQR
Texas InstrumentsThe ISO7041FADBQR from Texas Instruments is a 4-channel SPI digital isolator rated 3000 Vrms, with 4 Mbps data rate, 50 kV/µs CMTI and a 16-SSOP (0.154", 3.90 mm width) package.
View full detailsISO7041DBQ
Texas InstrumentsThe ISO7041DBQ from Texas Instruments is a general-purpose digital isolator rated 3000 Vrms with 4 channels, 2 Mbps and 50 kV/µs CMTI, in a 16-SSOP package (0.154", 3.90 mm width).
View full detailsISO7041ADBQR
Texas InstrumentsThe ISO7041ADBQR from Texas Instruments is a prototype digital isolator.
View full details