Search results for “LM56”

The LM56BIM/NOPB from Texas Instruments is an analog-output temperature sensor operating from -40 °C to 125 °C, in an 8-SOIC package.

The LM56BIM from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56CIMMX from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56CIMX/NOPB from National Semiconductor is an LM56 dual-output analog local temperature sensor rated -40 °C to 125 °C, with a 6.2 mV/°C output scale, in an 8-SOIC package.

The LM56CIM/NOPB from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56CIMX/NOPB from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56BIMMX from Texas Instruments is a local analog-output temperature sensor operating from -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-VSSOP package.

The LM56CIMM/NOPB from Texas Instruments is a local analog-output temperature sensor operating from -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-VSSOP package.

The LM56BIMX/NOPB from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56CIMX from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56BIMM from Texas Instruments is a local analog-output temperature sensor operating from -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-VSSOP package.

LM56CIMMX/NOPB from Texas Instruments is a 3°C Dual output resistor-programmable temperature switch with fan control - Temperature switches. The LM56 is a precision low power thermostat. Two stable temperature trip points (V T1 and V T2) are generated by dividing down the LM56 1.250V bandgap voltage reference using 3 external resistors. The LM56 has two digital outputs. OUT1 goes LOW when the temperature exceeds T1 and goes HIGH when the the temperature goes below (T1-T HYST). Similarly, OUT2 goes LOW when the temperature exceeds T2 and goes HIGH when the temperature goes below (T2-T HYST). T HYST is an internally set 5°C typical hysteresis. The LM56 is available in an 8-lead VSSOP surface mount package and an 8-lead SOIC.

The LM56CIMM from Texas Instruments is an analog-output temperature sensor operating from -40 °C to 125 °C, in an 8-SOIC package.

The LM56BIMX from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56CIM from Texas Instruments is a local analog temperature sensor measuring -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-SOIC package.

The LM56BIMMX/NOPB from Texas Instruments is a local analog-output temperature sensor operating from -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-VSSOP package.

The LM56BIMM/NOPB from Texas Instruments is a local analog-output temperature sensor operating from -40 °C to 125 °C with a 6.2 mV/°C output, in an 8-VSSOP package.

The LM56BIMX/NOPB from National Semiconductor is an LM56 dual-output analog local temperature sensor rated -40 °C to 125 °C, with a 6.2 mV/°C output scale, in an 8-SOIC package.

The LM56CIMX from National Semiconductor is an analog temperature sensor with a 6.2 mV/°C output, operating from −40°C to 125°C, in an 8-SOIC package. It is a dual trip point switch with digital signal output.

The LM56BIMX/NAK2 from National Semiconductor is an analog temperature sensor with a 6.2 mV/°C output, operating from −40°C to 125°C, in an 8-SOIC package. It is a dual trip point switch with digital signal output.

The LM56CIM-NS from National Semiconductor is an analog temperature sensor with a 6.2 mV/°C output, operating from −40°C to 125°C, in an 8-SOIC package. It is a dual trip point switch with digital signal output.

The LM5642XMHX from Texas Instruments is a positive-output, step-down DC-DC buck regulator controller Integrated Circuit in a 28-HTSSOP package.

The LM5642MTC from National Semiconductor is a current-mode step-down DC-DC controller Integrated Circuit for positive-output buck regulators, rated at 4.5 to 36 V, in a 28-TSSOP package.

The LM5642XMH/NOPB from Texas Instruments is a positive-output step-down (buck) DC-DC controller Integrated Circuit in a 28-HTSSOP package.

The LM567CMX from Texas Instruments is a telecom Integrated Circuit tone decoder in an 8-SOIC package.

The LM567CMX/NOPB from Texas Instruments is a telecom interface Integrated Circuit in an 8-SOIC package.

The LM567CM/NOPB from Texas Instruments is a telecom tone decoder Integrated Circuit in an 8-SOIC package.

The LM565CN/NOPB from Texas Instruments is a voltage-controlled oscillator (VCO) Integrated Circuit rated at 1 MHz with a rating of 1, in a 14-DIP (0.300", 7.62 mm) package.

The LM567CN/NOPB from Texas Instruments is a telecom tone decoder Integrated Circuit in an 8-PDIP package.

The LM5642XMH from Texas Instruments is a positive output, step-down DC-DC buck controller Integrated Circuit in a 28-HTSSOP package.

The LM5642MH/NOPB from Texas Instruments is a positive-output step-down (buck) DC-DC controller Integrated Circuit in a 28-HTSSOP package.

The LM5642XMHX/NOPB from Texas Instruments is a buck DC-DC controller Integrated Circuit in a 28-TSSOP package.

LM5642XMTX/NOPB from Texas Instruments is a Integrated Circuit High Voltage, Dual Synchronous Buck Converter with Oscillator Synchronization - DC/DC controllers. The LM5642 series consists of two current mode synchronous buck regulator controllers operating 180° out of phase with each other at a normal switching frequency of 200kHz for the LM5642 and at 375kHz for the LM5642X. Out of phase operation reduces the input RMS ripple current, thereby significantly reducing the required input capacitance. The switching frequency can be synchronized to an external clock between 150 kHz and 250 kHz for the LM5642 and between 200 kHz and 500 kHz for the LM5642X. The two switching regulator outputs can also be paralleled to operate as a dual-phase, single output regulator. The output of each channel can be independently adjusted from 1.3V to 90% of Vin. An internal 5V rail is also available externally for driving bootstrap circuitry. Current-mode feedback control assures excellent line and load regulation and wide loop bandwidth for excellent response to fast load transients. Current is sensed across either the Vds of the top FET or across an external current-sense resistor connected in series with the drain of the top FET. The LM5642 features analog soft-start circuitry that is independent of the output load and output capacitance making the soft-start behavior more predictable and controllable than traditional soft-start circuits. Over-voltage protection is available for both outputs. A UV-Delay pin is also available to allow delayed shut off time for the IC during an output under-voltage event.

The LM5642MHX/NOPB from Texas Instruments is a positive-output step-down (buck) DC-DC controller Integrated Circuit in a 28-HTSSOP package.

The LM567CMX/NOPB from National Semiconductor is a telecom tone decoder Integrated Circuit in an 8-SOIC package.

LM5642MTC/NOPB from Texas Instruments is a Integrated Circuit 4.5-36V, Current Mode Dual Synchronous Buck Controller with Oscillator Synchronization - DC/DC controllers. The LM5642 series consists of two current mode synchronous buck regulator controllers operating 180° out of phase with each other at a normal switching frequency of 200kHz for the LM5642 and at 375kHz for the LM5642X. Out of phase operation reduces the input RMS ripple current, thereby significantly reducing the required input capacitance. The switching frequency can be synchronized to an external clock between 150 kHz and 250 kHz for the LM5642 and between 200 kHz and 500 kHz for the LM5642X. The two switching regulator outputs can also be paralleled to operate as a dual-phase, single output regulator. The output of each channel can be independently adjusted from 1.3V to 90% of Vin. An internal 5V rail is also available externally for driving bootstrap circuitry. Current-mode feedback control assures excellent line and load regulation and wide loop bandwidth for excellent response to fast load transients. Current is sensed across either the Vds of the top FET or across an external current-sense resistor connected in series with the drain of the top FET. The LM5642 features analog soft-start circuitry that is independent of the output load and output capacitance making the soft-start behavior more predictable and controllable than traditional soft-start circuits. Over-voltage protection is available for both outputs. A UV-Delay pin is also available to allow delayed shut off time for the IC during an output under-voltage event.

The LM567CN from Texas Instruments is a telecom tone decoder Integrated Circuit in an 8-PDIP package.

The LM567CM/NOPB from National Semiconductor is a telecom tone decoder Integrated Circuit in an 8-SOIC package.

LM5642MTCX/NOPB from Texas Instruments is a Integrated Circuit 4.5-36V, Current Mode Dual Synchronous Buck Controller with Oscillator Synchronization - DC/DC controllers. The LM5642 series consists of two current mode synchronous buck regulator controllers operating 180° out of phase with each other at a normal switching frequency of 200kHz for the LM5642 and at 375kHz for the LM5642X. Out of phase operation reduces the input RMS ripple current, thereby significantly reducing the required input capacitance. The switching frequency can be synchronized to an external clock between 150 kHz and 250 kHz for the LM5642 and between 200 kHz and 500 kHz for the LM5642X. The two switching regulator outputs can also be paralleled to operate as a dual-phase, single output regulator. The output of each channel can be independently adjusted from 1.3V to 90% of Vin. An internal 5V rail is also available externally for driving bootstrap circuitry. Current-mode feedback control assures excellent line and load regulation and wide loop bandwidth for excellent response to fast load transients. Current is sensed across either the Vds of the top FET or across an external current-sense resistor connected in series with the drain of the top FET. The LM5642 features analog soft-start circuitry that is independent of the output load and output capacitance making the soft-start behavior more predictable and controllable than traditional soft-start circuits. Over-voltage protection is available for both outputs. A UV-Delay pin is also available to allow delayed shut off time for the IC during an output under-voltage event.

The LM567CM from National Semiconductor is a telecom tone decoder Integrated Circuit in an 8-SOIC package.

The LM567CM from Texas Instruments is a telecom interface Integrated Circuit in an 8-SOIC package.

The LM5642XMTX/J7002464 from National Semiconductor is a high-voltage, dual synchronous Integrated Circuit.