Search results for “OPA369”

The OPA369AIDCKT from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 1 circuit in an SC70-5 package.

The OPA369AIDCKR from Texas Instruments is a general-purpose, rail-to-rail operational amplifier Integrated Circuit with 1 circuit in an SC-70-5 package.

The OPA3692IDR from Texas Instruments is a video amplifier Integrated Circuit with 3 buffers, in a 16-SOIC package.

The OPA3692IDRG4 from Texas Instruments is a video amplifier with 3 buffers in a 16-SOIC package.

The OPA3691IDR from Texas Instruments is a current feedback op amp with 3 circuits in a 16-SOIC package.

The OPA3690IDR from Texas Instruments is a voltage feedback differential amplifier Integrated Circuit with 3 circuits, in a 16-SOIC package.

The OPA3691IDRG4 from Texas Instruments is a current feedback op amp Integrated Circuit with 3 circuits in a 16-SOIC package.

The OPA3690IDRG4 from Texas Instruments is a 3-circuit differential voltage feedback amplifier Integrated Circuit in a 16-SOIC package.

OPA3692IDBQT from Texas Instruments is a Integrated Circuit Triple, Wideband, Fixed Gain Video Buffer Amplifier With Disable - Video amplifiers. The OPA3692 provides an easy-to-use, broadband fixed gain, triple buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer, or a gain of +1 or -1 voltage buffer. Operating on a very low 5.1mA/ch supply current, the OPA3692 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers high output current with minimal headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA3692 can deliver a 1V to 4V output swing with over 120mA drive current and > 200MHz bandwidth. This combination of features makes the OPA3692 an ideal RGB line driver or single-supply, triple Analog-to- Digital Converter (ADC) input driver. The low 5.1mA/ch supply current of the OPA3692 is precisely trimmed at +25°C. This trim, along with low drift over temperature, ensures lower maximum supply current than competing products that report only a room temperature nominal supply current. System power can be further reduced by using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3692 supply current drops to less than 150µA/ch while the output goes into a high-impedance state. This feature may be used for power savings.

OPA3691IDBQT from Texas Instruments is a Integrated Circuit Triple Wideband Current Feedback Operational Amplifier with Disable - High-speed op amps (GBW ≥ 50 MHz). The OPA3691 sets a new level of performance for broadband, triple current-feedback op amps. Operating on a very low 5.1mA/ch supply current, the OPA3691 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers a high output current with minimal voltage headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA3691 can deliver a 1V to 4V output swing with over 120mA drive current and 150MHz bandwidth. This combination of features makes the OPA3691 an ideal RGB line driver or single-supply Analog-to-Digital Converter (ADC) input driver. The OPA3691‘s low 5.1mA/ch supply current is precisely trimmed at 25°C. This trim, along with low drift over temperature, ensures lower maximum supply current than competing products. System power may be further reduced by using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3691 supply current drops to less than 150µA/ch while the output goes into a high impedance state. This feature may be used for power savings.

OPA3690IDBQT from Texas Instruments is a Integrated Circuit Triple, Wideband, Voltage-Feedback Operational Amplifier with Disable - High-speed op amps (GBW ≥ 50 MHz). The OPA3690 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. A new output stage architecture delivers high currents with a minimal headroom requirement. These give exceptional single-supply operation. Using a single +5V supply, the OPA3690 can deliver a 1V to 4V output swing with over 120mA drive current and 150MHz bandwidth. This combination of features makes the OPA3690 an ideal RGB line driver or single-supply Analog-to-Digital Converter (ADC) input driver. The low 5.5mA/ch supply current of the OPA3690 is precisely trimmed at +25°C. This trim, along with low temperature drift, provides lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, will operate the OPA3690 normally. If pulled LOW, the OPA3690 supply current drops to less than 200µA/ch while the output goes to a high-impedance state. This feature may be used for power savings.

OPA3691IDBQR from Texas Instruments is a Integrated Circuit Triple Wideband Current Feedback Operational Amplifier with Disable - High-speed op amps (GBW ≥ 50 MHz). The OPA3691 sets a new level of performance for broadband, triple current-feedback op amps. Operating on a very low 5.1mA/ch supply current, the OPA3691 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers a high output current with minimal voltage headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA3691 can deliver a 1V to 4V output swing with over 120mA drive current and 150MHz bandwidth. This combination of features makes the OPA3691 an ideal RGB line driver or single-supply Analog-to-Digital Converter (ADC) input driver. The OPA3691‘s low 5.1mA/ch supply current is precisely trimmed at 25°C. This trim, along with low drift over temperature, ensures lower maximum supply current than competing products. System power may be further reduced by using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3691 supply current drops to less than 150µA/ch while the output goes into a high impedance state. This feature may be used for power savings.

The OPA3690IDG4 from Texas Instruments is a voltage feedback op amp with 3 circuits in a differential configuration, in a 16-SOIC package.

The OPA3691IDG4 from Texas Instruments is a current feedback amplifier with 3 circuits, in a 16-SOIC package.

OPA3693IDBQ from Texas Instruments is a Integrated Circuit Triple, ultra-wideband, fixed-gain, video buffer with disable - Video amplifiers. The OPA3693 provides an easy to use, broadband, triple, fixed-gain buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer or a gain of +1 or -1 voltage buffer. The OPA3693 offers a slew rate (2500V/µs) and bandwidth (> 800MHz) normally associated with a much higher supply current. A new output stage architecture delivers high output current with a minimal headroom and crossover distortion. This combination of features makes the OPA3693 an ideal RGB line driver or single-supply undersampling analog-to-digital converter (ADC) input driver. The OPA3693 13mA/channel supply current is precisely trimmed at +25°C. This trim, along with a low temperature drift, gives lower system power over temperature. System power can be further reduced using the optional disable control pin. Leaving this pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3693 supply current drops to less than 130µA/channel. This power-saving feature, along with exceptional single +5V operation, make the OPA3693 ideal for portable applications. The OPA3693 is available in an SSOP-16 package.

OPA3695IDBQ from Texas Instruments is a Integrated Circuit Ultra-Wideband, Current-Feedback Operational Amplifier with Disable - High-speed op amps (GBW ≥ 50 MHz). The OPA3695 is a triple, very high bandwidth, current-feedback op amp that combines an exceptional 4300V/µs slew rate and a very high 900MHz bandwidth (G = +2V/V) to provide an amplifier that is ideal for the most demanding video applications. The device versatility is enhanced with a low 1.8nV/√ Hz input voltage noise and an output stage that can swing within 1V from the supply rail to deliver a high dynamic range signal, making it well-suited for analog-to-digital converter (ADC) front-ends or digital-to-analog converter (DAC) output buffering. Optimized for high gain operation, the OPA3695 is also well-suited for buffering surface acoustic wave (SAW) filters in an intermediate frequency (IF) system. The low 12.9mA/channel supply current is precisely trimmed at +25°C. This trim, along with a low temperature drift, gives low system power over temperature. System power may be further reduced using the Disable control pin. Leaving this pin open, or holding it high, gives normal operation. If pulled low, the OPA3695 supply current drops to 100µA/channel. This power-saving feature, along with exceptional single +5V operation, makes the OPA3695 a good fit for low-power applications that require very high performance. The OPA3695 is available in an SSOP-16 package.

OPA3692IDBQR from Texas Instruments is a Integrated Circuit Triple, Wideband, Fixed Gain Video Buffer Amplifier With Disable - Video amplifiers. The OPA3692 provides an easy-to-use, broadband fixed gain, triple buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer, or a gain of +1 or -1 voltage buffer. Operating on a very low 5.1mA/ch supply current, the OPA3692 offers a slew rate and output power normally associated with a much higher supply current. A new output stage architecture delivers high output current with minimal headroom and crossover distortion. This gives exceptional single-supply operation. Using a single +5V supply, the OPA3692 can deliver a 1V to 4V output swing with over 120mA drive current and > 200MHz bandwidth. This combination of features makes the OPA3692 an ideal RGB line driver or single-supply, triple Analog-to- Digital Converter (ADC) input driver. The low 5.1mA/ch supply current of the OPA3692 is precisely trimmed at +25°C. This trim, along with low drift over temperature, ensures lower maximum supply current than competing products that report only a room temperature nominal supply current. System power can be further reduced by using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3692 supply current drops to less than 150µA/ch while the output goes into a high-impedance state. This feature may be used for power savings.

The OPA3691ID from Texas Instruments is a current feedback amplifier with 3 circuits in a 16-SOIC package.

OPA3693IDBQR from Texas Instruments is a Integrated Circuit Triple, ultra-wideband, fixed-gain, video buffer with disable - Video amplifiers. The OPA3693 provides an easy to use, broadband, triple, fixed-gain buffer amplifier. Depending on the external connections, the internal resistor network may be used to provide either a fixed gain of +2 video buffer or a gain of +1 or -1 voltage buffer. The OPA3693 offers a slew rate (2500V/µs) and bandwidth (> 800MHz) normally associated with a much higher supply current. A new output stage architecture delivers high output current with a minimal headroom and crossover distortion. This combination of features makes the OPA3693 an ideal RGB line driver or single-supply undersampling analog-to-digital converter (ADC) input driver. The OPA3693 13mA/channel supply current is precisely trimmed at +25°C. This trim, along with a low temperature drift, gives lower system power over temperature. System power can be further reduced using the optional disable control pin. Leaving this pin open, or holding it HIGH, gives normal operation. If pulled LOW, the OPA3693 supply current drops to less than 130µA/channel. This power-saving feature, along with exceptional single +5V operation, make the OPA3693 ideal for portable applications. The OPA3693 is available in an SSOP-16 package.

The OPA3692ID from Texas Instruments is a video amplifier with 3 buffers in a 16-SOIC package.

The OPA3690ID from Texas Instruments is a voltage-feedback op amp with 3 circuits in a differential configuration, in a 16-SOIC package.

The OPA3692IDG4 from Texas Instruments is a video amplifier Integrated Circuit with 3 buffers in a 16-SOIC package.

The OPA3692ID from Burr Brown is a triple, wideband, fixed-gain operational amplifier Integrated Circuit.