Search results for “PurePath”

TAS5615DKD from Texas Instruments is a Integrated Circuit Analog input 160W Stereo (300W total) class D amplifier with integrated feedback - General-purpose audio amplifiers. The TAS5615 is a high-performance analog input class-D amplifier with integrated closed-loop feedback technology (known as PurePath™ HD technology). It has the ability to drive up to 160 W (1) stereo into 8- speakers from a single 50-V supply. PurePath HD technology enables traditional AB-amplifier performance (<0.03% THD) levels while providing the power efficiency of traditional class-D amplifiers. Ultralow 0.03% THD+N is flat across all frequencies, ensuring that the amplifier does not add uneven distortion characteristics, and helps maintain a natural sound. The efficiency of this class-D amplifier is greater than 90%. Undervoltage protection, overtemperature, clipping, short-circuit and overcurrent protection are all integrated, safeguarding the device and speakers against fault conditions that could damage the system.

TAS5768MDCAR from Texas Instruments is a Integrated Circuit 50-W stereo, 100-W mono, 4.5- to 26.4-V supply, digital input Class-D Smart Audio Amplifier w/ 1SPW - PC & notebook audio amplifiers. The TAS576xM PurePath Smart Amp enhance the bass, sound fidelity and provide more loudness and at the same time drive a speaker to its thermal and mechanical limits. The TAS576xM contains two BTL class-D amplifiers - with up to 2x50W peak into 4Ω. The amplifier is thermally designed to fit with the typical speaker so it can handle high peaks for the time it takes the speaker voice-coil to heat up, and then it lowers the average power to safe limits. The wide supply range of 4.5 V to 26.4 V enables the use of a wide range of different power supply options from 2-cell Li-Ion batteries to fixed 24 V supply. TI’s PurePath Smart Amp technology allow speakers to be driven with more peak power than their average power rating, without fear of damage to the speaker through over excursion or thermal-overload.

The CC8521RHAR from Texas Instruments is an RF transceiver and MCU IC for general ISM above 1 GHz at 2.4 GHz, in a 40-VFQFN exposed pad package.

TAS5352DDVR from Texas Instruments is a Integrated Circuit 125-W Stereo Digital Amplifier Power Stage - General-purpose audio amplifiers. The TAS5352 is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4- bridge-tied load (BTL) at up to 125 W per channel with low harmonic distortion, low integrated noise, and low idle current. The TAS5352 has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, over-current protection, under voltage protection, over temperature protection, and a loss of PWM signal (PWM activity detector). A power-on-reset (POR) circuit is used to eliminate power-supply sequencing that is required for most power-stage designs.

TAS5768MDCA from Texas Instruments is a Integrated Circuit 50-W stereo, 100-W mono, 4.5- to 26.4-V supply, digital input Class-D Smart Audio Amplifier w/ 1SPW - PC & notebook audio amplifiers. The TAS576xM PurePath Smart Amp enhance the bass, sound fidelity and provide more loudness and at the same time drive a speaker to its thermal and mechanical limits. The TAS576xM contains two BTL class-D amplifiers - with up to 2x50W peak into 4Ω. The amplifier is thermally designed to fit with the typical speaker so it can handle high peaks for the time it takes the speaker voice-coil to heat up, and then it lowers the average power to safe limits. The wide supply range of 4.5 V to 26.4 V enables the use of a wide range of different power supply options from 2-cell Li-Ion batteries to fixed 24 V supply. TI’s PurePath Smart Amp technology allow speakers to be driven with more peak power than their average power rating, without fear of damage to the speaker through over excursion or thermal-overload.

The CC8520RHAR from Texas Instruments is an RF transceiver IC with integrated MCU for ISM bands above 1 GHz, in a 40-VFQFN package.

The CC8521RHAT from Texas Instruments is an RF transceiver IC with integrated MCU for general ISM use above 1 GHz at 2.4 GHz, in a 40-VFQFN package with exposed pad.

TAS5766MRMTR from Texas Instruments is a IC AMP CLASS D STEREO 48VQFN

TPA3255DDV from Texas Instruments is a Integrated Circuit 315-W stereo, 600-W mono, 18- to 53.5-V supply, analog input Class-D audio amplifier - General-purpose audio amplifiers. TPA3255 is a high performance class-D power amplifier that enables true premium sound quality with class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. The device is operated in AD-mode, and can drive up to 2 x 315 W into 4-Ω load at 10% THD and 2 x 150 W unclipped into 8-Ω load and features a 2 VRMS analog input interface that works seamlessly with high performance DACs such as TI’s PCM5242. In addition to excellent audio performance, TPA3255 achieves both high power efficiency and very low power stage idle losses below 2.5W. This is achieved through the use of 85 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.

The CC8520RHAT from Texas Instruments is an RF transceiver and MCU IC for general ISM use above 1 GHz, at 2.4 GHz, in a 40-VFQFN package with exposed pad.

TAS5613APHD from Texas Instruments is a IC AMP D MONO/STER 300W 64HTQFP

TAS5613PHDR from Texas Instruments is a IC AMP D MONO/STER 300W 64HTQFP

TAS5615PHD from Texas Instruments is a IC AMP D MONO/STER 300W 64HTQFP

TAS5768MRMTR from Texas Instruments is a IC AMP CLASS D STEREO 48VQFN

TAS5768MRMTT from Texas Instruments is a IC AMP CLASS D STEREO 48VQFN

The CC8531RHAR from Texas Instruments is an RF transceiver IC with MCU for general ISM above 1 GHz at 2.4 GHz, in a 40-VFQFN package with exposed pad.

TAS5630PHD from Texas Instruments is a IC AMP D MONO/STER 600W 64HTQFP

The CC8530RHAT from Texas Instruments is an RF transceiver IC with integrated MCU for general ISM use above 1 GHz at 2.4 GHz, in a 40-VFQFN package with exposed pad.

TAS5613APHDR from Texas Instruments is a IC AMP D MONO/STER 300W 64HTQFP

TAS5026IPAG from Texas Instruments is a IC MODULATOR 64TQFP

TAS5612APHDR from Texas Instruments is a IC AMP D MONO/STER 250W 64HTQFP

TAS5614APHDR from Texas Instruments is a IC AMP D MONO/STER 300W 64HTQFP

TAS5028PAG from Texas Instruments is a IC MODULATOR 64TQFP

TAS5026PAGRG4 from Texas Instruments is a IC MODULATOR 64TQFP

TAS5026PAG from Texas Instruments is a IC MODULATOR 64TQFP

TAS5086DBTR from Texas Instruments is a IC MODULATOR 38TSSOP

TAS5162DDV from Texas Instruments is a Integrated Circuit 160-W stereo, 300-W mono, 0- to 52.5-V supply, PWM input Class-D audio amplifier - General-purpose audio amplifiers. The TAS5162 is a high performance, integrated stereo digital amplifier power stage with an improved protection system. The TAS5162 is capable of driving a 6- bridge-tied load (BTL) at up to 210 W per channel at THD = 10%, low integrated noise at the output, low THD+N performance without clipping, and low idle power dissipation. A low-cost, high-fidelity audio system can be built using a TI chipset, comprising a modulator (e.g., TAS5508) and the TAS5162. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. This device requires two power supplies, at 12 V for GVDD and VDD, and at 50V for PVDD. The TAS5162 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 6, which enables the use of smaller power supplies and heatsinks. The TAS5162 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5162 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients. A new programmable overcurrent detector allows the use of lower-cost inductors in the demodulation output filter.

The CC8531RHAT from Texas Instruments is an RF transceiver and MCU IC for general ISM use above 1 GHz at 2.4 GHz, in a 40-VFQFN package with exposed pad.

TAS5176DDW from Texas Instruments is a Integrated Circuit 100-W 5.1 channel, 0- to 34-V supply, PWM input Class-D audio amplifier - General-purpose audio amplifiers. The TAS5176 is a high-performance, six-channel, digital-amplifier power stage with an improved protection system. The TAS5176 is capable of driving a 8-, single-ended subwoofer greater than 25 W at 10% THD+N performance. Furthermore, the TAS5176 can drive three-channels in BTL mode, with the same high-performance but with a higher power level. In BTL mode, the TAS5176 is capable of driving 8- loads to greater than 30 Watts at 10% THD+N performance. A low-cost, high-fidelity audio system can be built using a TI chipset comprising a modulator (e.g., TAS5086) and the TAS5176. This device does not require power-up sequencing because of the internal power-on reset. The TAS5176 requires only simple passive demodulation filters on its outputs to deliver high-quality, high-efficiency audio amplification. The efficiency of the TAS5176 is greater than 90% when driving 8- subwoofer speaker. The TAS5176 has an innovative protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overload protection, undervoltage protection, and overtemperature protection. The TAS5176 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients. A new programmable overcurrent detector allows the use of lower-cost inductors in the demodulation output filter.

TPA3250D2DDW from Texas Instruments is a Integrated Circuit 70-W stereo, 140-W mono, 12- to 38-V supply, analog input Class-D audio amplifier, pad-down - General-purpose audio amplifiers. The TPA3250 device is a high performance class-D power amplifier that enables true premium sound quality with class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. With a 32V power supply the device can drive up to 2 × 130 W peak into 4-Ω load and 2 × 70 W continuous into 8-Ω load and features a 2 VRMS analog input interface that works seamlessly with high performance DACs such as TI’s PCM5242. In addition to excellent audio performance, TPA3250 achieves both high power efficiency and very low power stage idle losses below 1 W. This is achieved through the use of 60 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.

TPA3251D2DDV from Texas Instruments is a Integrated Circuit 175-W stereo, 350-W mono, 12- to 38-V supply, analog input Class-D Smart Audio Amplifier - Speaker, TV & soundbar audio amplifiers. TPA3251 is a high performance class-D power amplifier that enables true premium sound quality with class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. The device can drive up to 2 x 175 W into 4-Ω load and 2 x 220 W into 3-Ω load and features a 2 VRMS analog input interface that works seamlessly with high performance DACs such as TI’s PCM5242. In addition to excellent audio performance, TPA3251 achieves both high power efficiency and very low power stage idle losses below 1 W. This is achieved through the use of 60 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.

TAS5028PAGRG4 from Texas Instruments is a IC MODULATOR 64TQFP

TAS5631PHDR from Texas Instruments is a IC AMP D MONO/STER 600W 64HTQFP

TAS5766MDCAR from Texas Instruments is a Integrated Circuit 50-W stereo, 100-W mono, 4.5- to 26.4-V supply, digital input Class-D Smart Audio Amplifier - PC & notebook audio amplifiers. The TAS576xM PurePath Smart Amp enhance the bass, sound fidelity and provide more loudness and at the same time drive a speaker to its thermal and mechanical limits. The TAS576xM contains two BTL class-D amplifiers - with up to 2x50W peak into 4Ω. The amplifier is thermally designed to fit with the typical speaker so it can handle high peaks for the time it takes the speaker voice-coil to heat up, and then it lowers the average power to safe limits. The wide supply range of 4.5 V to 26.4 V enables the use of a wide range of different power supply options from 2-cell Li-Ion batteries to fixed 24 V supply. TI’s PurePath Smart Amp technology allow speakers to be driven with more peak power than their average power rating, without fear of damage to the speaker through over excursion or thermal-overload.

TAS5026PAGR from Texas Instruments is a IC MODULATOR 64TQFP

The CC8530RHAR from Texas Instruments is an RF transceiver and MCU IC for general ISM above 1 GHz at 2.4 GHz, in a 40-VFQFN exposed pad package.

TPA3255DDVR from Texas Instruments is a Integrated Circuit 315-W stereo, 600-W mono, 18- to 53.5-V supply, analog input Class-D audio amplifier - General-purpose audio amplifiers. TPA3255 is a high performance class-D power amplifier that enables true premium sound quality with class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. The device is operated in AD-mode, and can drive up to 2 x 315 W into 4-Ω load at 10% THD and 2 x 150 W unclipped into 8-Ω load and features a 2 VRMS analog input interface that works seamlessly with high performance DACs such as TI’s PCM5242. In addition to excellent audio performance, TPA3255 achieves both high power efficiency and very low power stage idle losses below 2.5W. This is achieved through the use of 85 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.

TPA3245DDVR from Texas Instruments is a Integrated Circuit 115-W stereo, 230-W mono, 12- to 31.5-V supply, analog input Class-D audio amplifier - Speaker, TV & soundbar audio amplifiers. TPA3245 is a high performance class-D power amplifier that enables true premium sound quality with class-D efficiency. It features an advanced integrated feedback design and proprietary high-speed gate driver error correction (PurePath™ Ultra-HD). This technology allows ultra low distortion across the audio band and superior audio quality. The device is operated in AD-mode, and can drive up to 2 x 115 W into 4-Ω load and 2 x 145 W into 3-Ω load and features a 2 VRMS analog input interface that works seamlessly with high performance DACs such as TI’s PCM5242. In addition to excellent audio performance, TPA3245 achieves both high power efficiency and very low power stage idle losses below 0.45 W. This is achieved through the use of 65 mΩ MOSFETs and an optimized gate driver scheme that achieves significantly lower idle losses than typical discrete implementations.

TAS5352ADDV from Texas Instruments is a Integrated Circuit 125-W stereo, 250-W mono, 0- to 37-V supply, PWM input Class-D audio amplifier - Speaker, TV & soundbar audio amplifiers. The TAS5352A device is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-Ω bridge-tied load (BTL) at up to 125 W per channel with low harmonic distortion, low integrated noise, and low idle current. The TAS5352A has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, overcurrent protection, undervoltage protection, overtemperature protection, and a loss of PWM signal (PWM activity detector). A power-on-reset (POR) circuit is used to eliminate power-supply sequencing that is required for most power-stage designs.

TAS5086DBT from Texas Instruments is a Integrated Circuit 6 Channel Digital Audio PWM Processor - PWM modulators. The TAS5086 is a six-channel digital pulse-width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5086 is designed to interface seamlessly with most audio digital signal processors and MPEG decoders, accepting a wide range of input data and clock formats. The TAS5086 drives six channels of speakers in either single-ended or bridge-tied load configurations that accept a 1N + 1 interface format. The TAS5086 also supports 2N + 1 power stages with the use of some external logic (e.g., TAS5112). Stereo line out in I 2 S format is available with either a pass-through signal (SDIN4) or an internal downmix. The TAS5086 uses AD modulation operating at a 384-kHz switching rate for 32-, 44.1-, 48-, 88.2-, 96-, 176.4-, and 192-kHz data. The 8× oversampling, combined with the 4th-order noise shaper, provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz. The TAS5086 is only an I 2 C slave device, which always receives MCLK, SCLK, and LRCLK from other system components. The TAS5086 accepts clock rates of 128, 192, 256, 384, and 512 f S. The TAS5086 accepts a 64-f S master clock for 176.4-kHz and 192-kHz data. The TAS5086 accepts a 64-f S bit clock for all data rates. The TAS5086 also can accept a 48-f S SCLK rate for MCLK ratios of 192 f S and 384 f S. The TAS5086 is composed of five functional blocks. Power supply Clock, PLL, and serial data interface Serial control interface Device control PWM section For detailed application information, see the Using the PurePath Digital PWM Processor application report (SLEA046).

RX-8803SA:UC PURE SN from EPSON is a IC RTC CLK/CALENDAR I2C 14SOP

TAS5611PHDR from Texas Instruments is a IC AMP D MONO/STER 250W 64HTQFP

TAS5076PFCG4 from Texas Instruments is a Integrated Circuit MODULATOR 80TQFP