Search results for “SEPS”

The SEPS-2-33+ from Mini-Circuits is an RF power divider covering 600 MHz to 3 GHz, with 17 dB minimum isolation, 1.75 VSWR maximum, 5° maximum imbalance, and a 22-SMD no-lead package.

The SEPS-8-153+ from Mini-Circuits is an RF power divider module for 6 GHz to 15 GHz in a 28-SMD package, with 16 dB minimum isolation and 1.9 VSWR typical.

The SEPS-8-272+ from Mini-Circuits is an RF power divider covering 700 MHz to 2.7 GHz, with 14 dB minimum isolation, 1.7 VSWR maximum and 19° maximum imbalance, in a 24-SMD no-lead package.

The SEPS-3-33+ from Mini-Circuits is an RF power divider for 700 MHz–3 GHz with minimum isolation of 16 dB, maximum VSWR of 1.65 and maximum imbalance of 9°, in a 22-SMD no-lead package.

The SEPS-4-272+ from Mini-Circuits is an RF power divider for 690 MHz–2.7 GHz with minimum isolation of 15 dB, maximum VSWR of 1.5 and maximum imbalance of 7°, in a 22-SMD no-lead package.

The SEPS-4-222+ from Mini-Circuits is an RF power divider covering 800 MHz to 2.2 GHz, with minimum isolation of 17 dB, maximum imbalance of 6°, and a 22-SMD no-lead package.

The SEPS-2-63+ from Mini-Circuits is an RF power divider for 680 MHz–6 GHz with minimum isolation of 17 dB, maximum VSWR of 2 and maximum imbalance of 5°, in a 22-SMD no-lead package.

111578HA from Caplugs is a SEP-25 PE-LD01 PINK-P, 1000/CS

08097262 from Littelfuse Inc. is a EL.BMS TGC/RMSM 24V SEP.FEED. (+

99394564 from Caplugs is a SEP-40 PE-LD01 PINK-P MICRO, 40/

111678HA from Caplugs is a SEP-12 PE-LD01 PINK-P, 5000/CS

99394557 from Caplugs is a SEP-32 PE-LD01 PINK-P MICRO, 40/

99191002 from Caplugs is a SEP-36 PE-LD01 PINK-P MINI, 200/

SN65C1168EMPWTSEP from Texas Instruments is a Radiation-tolerant, RS-422 dual differential drivers and receivers - RS-485 & RS-422 transceivers. The SN65C1168E-SEP consists of dual drivers and dual receivers with ±12-kV ESD (HBM) and ±8-kV ESD (IEC61000-4-2 Air-Gap Discharge and Contact Discharge) for RS-422 bus pins. The device meets the requirements of TIA/EIA-422-B and ITU recommendation V.11. Some parameters do not meet all TIA/EIA-422-B and ITU recommendation V.11 requirements after 20-krad(Si) TID exposure. The SN65C1168E-SEP drivers have individual active-high enables.

99190998 from Caplugs is a SEP-32 PE-LD01 PINK-P MINI, 200/

99191005 from Caplugs is a SEP-40 PE-LD01 PINK-P MINI, 200/

99394561 from Caplugs is a SEP-36 PE-LD01 PINK-P MICRO, 40/

20SEP100M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 100UF 20% 20V T/H

99390151 from Caplugs is a SEP-10 PE-LD01 PINK-P MICRO, 100

10SEP56M from Panasonic Electronic Components is a ALUMIN CAP POLY 56UF 20% 10V T/H

99394554 from Caplugs is a SEP-28 PE-LD01 PINK-P MICRO, 40/

4SEP220M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 220UF 20% 4V T/H

SN54SLC8T245PWTSEP from Texas Instruments is a Integrated Circuit Radiation-tolerant, 8-bit 0.65V to 3.3V, direction-controlled level translator - Voltage translators. The SN54SLC8T245-SEP device is an 8-bit non-inverting bus transceiver that resolves voltage level mismatch between devices operating at the latest voltage nodes (0.7 V, 0.8 V, and 0.9 V) and devices operating at industry standard voltage nodes (1.8 V, 2.5 V, and 3.3 V). The device operates by using two independent power-supply rails (V CCA and V CCB) that operate as low as 0.65 V. Data pins A1 through A8 are designed to track V CCA, which accepts any supply voltage from 0.65 V to 3.6 V. Data pins B1 through B8 are designed to track V CCB, which accepts any supply voltage from 0.65 V to 3.6 V. The SN54SLC8T245-SEP device is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level of the direction-control inputs (DIR1 and DIR2). The output-enable (OE) input is used to disable the outputs so the buses are effectively isolated. The SN54SLC8T245-SEP device is designed so the control pins (DIR and OE) are referenced to V CCA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs when the device is powered down. This inhibits current backflow into the device which prevents damage to the device. The V CC isolation feature is designed so that if either V CC input supply is below 100 mV, all level shifter outputs are disabled and placed into a high-impedance state. To put the level shifter I/Os in the high-impedance state during power up or power down, tie OE to V CCA through a pullup resistor; the current-sinking capability of the driver determines the minimum value of the resistor.

20SEP56M from Panasonic Electronic Components is a ALUMIN CAP POLY 56UF 20% 20V T/H

25SEP6R8M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 6.8UF 20% 25V T/H

114878HA from Caplugs is a SEP-36 PE-LD01 PINK-P, 1000/CS

112978HA from Caplugs is a SEP-20 PE-LD01 PINK-P, 2500/CS

4SEP560M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 560UF 20% 4V T/H

4SEP100M from Panasonic Electronic Components is a ALUMIN CAP POLY 100UF 20% 4V T/H

16SEP180M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 180UF 20% 16V T/H

110878HA from Caplugs is a SEP-08 PE-LD01 PINK-P, 5000/CS

113678HA from Caplugs is a SEP-24 PE-LD01 PINK-P, 1000/CS

20SEP33M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 33UF 20% 20V T/H

16SEP82M+TSS from Panasonic Electronic Components is a ALUMIN CAP POLY 82UF 20% 16V T/H

99190967 from Caplugs is a SEP-08 PE-LD01 PINK-P MINI, 1000