Search results for “TLE214”

The TLE2141AIDRG4 from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 1 circuit in an 8-SOIC package.

The TLE2144IDWG4 from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with a 5.9 MHz specification, 4 circuits, rail-to-rail, in a 16-SOIC package.

The TLE2142ACP from Texas Instruments is a general-purpose amplifier with 2 circuits and rail-to-rail operation, in an 8-PDIP package.

The TLE2142IP from Texas Instruments is a rail-to-rail general-purpose amplifier Integrated Circuit with 2 circuits in an 8-PDIP package.

TLE2144AMFKB from Texas Instruments is a High Speed High Drive Precision Quad Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

TLE2142AMFKB from Texas Instruments is a High Speed High Drive Precision Dual Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

The TLE2144MJB from Texas Instruments is a general-purpose op amp with 4 circuits and rail-to-rail operation in a 14-CDIP package.

The TLE2142CP from Texas Instruments is a general-purpose amplifier Integrated Circuit with 2 circuits and rail-to-rail operation, in an 8-PDIP package.

TLE2144AMJB from Texas Instruments is a High Speed High Drive Precision Quad Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

The TLE2142AMDRG4 from Texas Instruments is a rail-to-rail general-purpose operational amplifier Integrated Circuit with 2 circuits in an 8-SOIC package.

TLE2142AMJGB from Texas Instruments is a High Speed High Drive Precision Dual Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

The TLE2142ACD from Texas Instruments is a general-purpose op amp with 2 circuits and rail-to-rail operation in an 8-SOIC package.

The TLE2142MUB from Texas Instruments is a general-purpose op amp with 2 circuits and rail-to-rail operation in a 10-CFP package.

The TLE2144CDWR from Texas Instruments is a general-purpose operational amplifier with 4 circuits, rail-to-rail operation, in a 16-SOIC package.

The TLE2144MDW from Texas Instruments is a general-purpose op-amp with 4 circuits and rail-to-rail operation in a 16-SOIC package.

The TLE2144ACN from Texas Instruments is a general-purpose amplifier Integrated Circuit with 4 circuits and rail-to-rail operation, in a 14-PDIP package.

TLE2142MJGB from Texas Instruments is a High Speed High Drive Precision Dual Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

The TLE2142AMJG from Texas Instruments is a general-purpose op amp with 2 circuits and rail-to-rail operation in an 8-CDIP package.

The TLE2144IDWR from Texas Instruments is a 4-circuit general-purpose operational amplifier with rail-to-rail operation in a 16-SOIC package.

The TLE2144MDWG4 from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 4 circuits in a 16-SOIC package.

The TLE2142AMUB from Texas Instruments is a general-purpose op amp with 4 circuits and rail-to-rail operation in a 10-CFP package.

The TLE2144CDW from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 4 circuits, rail-to-rail, in a 16-SOIC package.

The TLE2144MDWREP from Texas Instruments is a general-purpose rail-to-rail operational amplifier Integrated Circuit with 4 circuits, in a 16-SOIC package.

TLE2142MFKB from Texas Instruments is a High Speed High Drive Precision Dual Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

The TLE2142CD from Texas Instruments is a general-purpose op amp Integrated Circuit with 2 circuits and rail-to-rail operation, in an 8-SOIC package.

The TLE2144IDW from Texas Instruments is a general-purpose op amp Integrated Circuit with 4 circuits and rail-to-rail operation in a 16-SOIC package.

The TLE2144IN from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 4 circuits, in a 14-DIP package.

TLE2144MFKB from Texas Instruments is a High Speed High Drive Precision Quad Operational Amplifier - General-purpose op amps. The TLE214x and TLE214xA devices are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE214xA is a tighter offset voltage grade of the TLE214x. Both are pin-compatible upgrades to standard industry products. The design incorporates an input stage that simultaneously achieves low audio-band noise of 10.5nV/√ Hz with a 10Hz 1/f corner and symmetrical 40V/µs slew rate typically with loads up to 800pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 430ns to 0.1% of a 10V step with a 2kΩ/100pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 640ns. Both versions can also be used as comparators. Differential inputs of VCC± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200ns. This gives a good indication as to output stage saturation recovery when the device is driven beyond the limits of recommended output swing. Both the TLE214x and TLE214xA are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix devices are characterized for operation from 0°C to 70°C, I-suffix devices from -40°C to 105°C, and M-suffix devices over the full military temperature range of -55°C to 125°C.

The TLE2144CN from Texas Instruments is a general-purpose operational amplifier with 4 circuits and rail-to-rail operation, in a 14-PDIP package.

The TLE2144AIN from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 4 circuits, rail-to-rail, in a 14-PDIP package.

The TLE2142AIDR from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 2 circuits and rail-to-rail operation, in an 8-SOIC package.

The TLE2142AMDR from Texas Instruments is a general-purpose op amp Integrated Circuit with 2 circuits and rail-to-rail operation, in an 8-SOIC package.

The TLE2142AMD from Texas Instruments is a general-purpose rail-to-rail amplifier Integrated Circuit with 2 circuits in an 8-SOIC package.

The TLE2141IP from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 1 circuit in an 8-PDIP package.

The TLE2144CDWRG4 from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 4 circuits and rail-to-rail operation in a 16-SOIC package.

The TLE2142IDR from Texas Instruments is a rail-to-rail general-purpose operational amplifier Integrated Circuit with 2 circuits in an 8-SOIC package.

The TLE2141CD from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 1 circuit, in an 8-SOIC package.

The TLE2142IDRG4 from Texas Instruments is a general-purpose op amp Integrated Circuit with 2 circuits, rail-to-rail operation and an 8-SOIC package.

TLE2141MJGB from Texas Instruments is a High Speed High Drive Precision Operational Amplifier - Precision op amps (Vos<1mV). The TLE2141M and TLE2141AM are high-performance, internally compensated operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The TLE2141AM is a tighter offset voltage grade of the TLE2141M. Both are pin-compatible upgrades to standard industry products. The design incorporates a patent-pending input stage that simultaneously achieves low audio band noise of 10.5 nV/√ Hz with a 10-Hz 1/f corner and symmetrical 40-V/µs slew rate typically with loads up to 800 pF. The resulting low distortion and high power bandwidth are important in high-fidelity audio applications. A fast settling time of 340 ns to 0.1% of a 10-V step with a 2-kΩ/100-pF load is useful in fast actuator/positioning drivers. Under similar test conditions, settling time to 0.01% is 400 ns. The devices are stable with capacitive loads up to 10 nF, although the 6-MHz bandwidth decreases to 1.8 MHz at this high loading level. As such, the TLE2141M and TLE2141AM are useful for low-droop sample and holds and direct buffering of long cables, including four 20-mA current loops. The special design also exhibits an improved insensitivity to inherent IC component mismatches as is evidenced by a 500-µV maximum offset voltage and 1.7-µV/°C typical drift. Minimum common-mode rejection ratio and supply-voltage rejection ratio are 85 dB and 90 dB, respectively. Device performance is relatively independent of supply voltage over the ±2-V to ±22-V range. Inputs can operate between V CC- -0.3 to V CC+ -1.8 V without inducing phase reversal, although excessive input current may flow out of each input exceeding the lower common-mode input range. The all NPN output stage provides a nearly rail-to-rail output swing of V CC- +0.1 to V CC+ -1 V under light current loading conditions. The device can sustain shorts to either supply since output current is internally limited, but care must be taken to ensure that maximum package power dissipation is not exceeded. Both versions can also be used as comparators. Differential inputs of V CC ± can be maintained without damage to the device. Open-loop propagation delay with TTL supply levels is typically 200 ns. This gives a good indication as to output stage saturation recovery when the device is overdriven beyond the limits of recommended output swing. Both the TLE2141M and TLE2141AM are available in a wide variety of packages, including both the industry-standard 8-pin small-outline version and chip form for high-density system applications. The M-suffix is characterized for operation over the full military temperature range of -55°C to 125°C.

The TLE2142ACDG4 from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 2 circuits and rail-to-rail operation, in an 8-SOIC package.

The TLE2142ID from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 2 circuits in an 8-SOIC package.

The TLE2142MD from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 2 circuits, in an 8-SOIC package.

The TLE2142MDG4 from Texas Instruments is a rail-to-rail general-purpose amplifier with 2 circuits in an 8-SOIC package.

The TLE2141ACP from Texas Instruments is a general-purpose operational amplifier with 1 circuit, in an 8-PDIP package.

The TLE2142AMDG4 from Texas Instruments is a general-purpose op amp Integrated Circuit with 2 circuits and rail-to-rail operation in an 8-SOIC package.

The TLE2141AMJGB from Texas Instruments is a general-purpose op amp with 1 circuit and rail-to-rail operation in an 8-CDIP package.

The TLE2141AIDR from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 1 circuit in an 8-SOIC package.

The TLE2141ACD from Texas Instruments is a general-purpose operational amplifier Integrated Circuit with 1 circuit in an 8-SOIC package.