Skip to content

Search results for “TLV154”

Products

TLV1549IDR

Texas Instruments
Low stock

The TLV1549IDR from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with 1 input, in an 8-SOIC package.

View full details

TLV1548CDBG4

Texas Instruments
Low stock

The TLV1548CDBG4 from Texas Instruments is a 10-bit serial ADC Integrated Circuit rated at 87 kSPS in a 20-SSOP package.

View full details

TLV1548QDBREP

Texas Instruments
In stock

TLV1548QDBREP from Texas Instruments is a Integrated Circuit Enhanced Product Low-Voltage 10-Bit Adc W/Serial Control & 8 Analog Input - Precision ADCs. The TLV1548 is a CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converter. The device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provides a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The device allows high-speed data transfers from the host. The INV CLK input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1548 is designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1548 has eight analog input channels. The TLV1548Q is characterized for operation from -40°C to 125°C.

View full details

TLV1543IDB

Texas Instruments
Low stock

TLV1543IDB from Texas Instruments is a Integrated Circuit 10-Bit 200 kSPS ADC Ser. Out, Built-In Self-Test Modes, Inherent S&H, Pin Compat. w/TLC1543, 11 Ch. - Precision ADCs. The TLV1543C, TLV1543I, and TLV1543M are CMOS 10-bit, switched-capacitor, successive-approximation, analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. The devices allow high-speed data transfers from the host. In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range. The TLV1543C is characterized for operation from 0°C to 70°C. The TLV1543I is characterized for industrial temperature range of -40°C to 85°C. The TLV1543M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1543IDBR

Texas Instruments
In stock

TLV1543IDBR from Texas Instruments is a Integrated Circuit 10-Bit 200 kSPS ADC Ser. Out, Built-In Self-Test Modes, Inherent S&H, Pin Compat. w/TLC1543, 11 Ch. - Precision ADCs. The TLV1543C, TLV1543I, and TLV1543M are CMOS 10-bit, switched-capacitor, successive-approximation, analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. The devices allow high-speed data transfers from the host. In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range. The TLV1543C is characterized for operation from 0°C to 70°C. The TLV1543I is characterized for industrial temperature range of -40°C to 85°C. The TLV1543M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1548QDBRQ1

Texas Instruments
Low stock

TLV1548QDBRQ1 from Texas Instruments is a Integrated Circuit Automotive Low-Voltage 10-Bit Analog-to-Digital Converter w/Serial Control & 8 Analog Input - Precision ADCs. The TLV1548 is a CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converter. The device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provides a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The device allows high-speed data transfers from the host. The INV CLK input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1548 is designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1548 has eight analog input channels. The TLV1548Q is characterized for operation over the full automotive temperature range of -40°C to 125°C.

View full details

TLV1548MJB

Texas Instruments
Low stock

The TLV1548MJB from Texas Instruments is a low-voltage 10-bit analog-to-digital converter (ADC).

View full details

TLV1543CDWRG4

Texas Instruments
Low stock

The TLV1543CDWRG4 from Texas Instruments is a 10-bit SAR analog-to-digital converter with 11 inputs and 1 SAR converter, in a 20-SOIC package.

View full details

TLV1544IPW

Texas Instruments
In stock

The TLV1544IPW from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-TSSOP package.

View full details

TLV1543CDBR

Texas Instruments
In stock

TLV1543CDBR from Texas Instruments is a Integrated Circuit 10-Bit 200 kSPS ADC Ser. Out, Built-In Self-Test Modes, Inherent S&H, Pin Compat. w/TLC1543, 11 Ch. - Precision ADCs. The TLV1543C, TLV1543I, and TLV1543M are CMOS 10-bit, switched-capacitor, successive-approximation, analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. The devices allow high-speed data transfers from the host. In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range. The TLV1543C is characterized for operation from 0°C to 70°C. The TLV1543I is characterized for industrial temperature range of -40°C to 85°C. The TLV1543M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1544CPWG4

Texas Instruments
Low stock

The TLV1544CPWG4 from Texas Instruments is a 10-bit analog-to-digital converter with 4 inputs and 1 SAR, in a 16-TSSOP package.

View full details

TLV1544CPWR

Texas Instruments
In stock

The TLV1544CPWR from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-TSSOP package.

View full details

TLV1544IPWG4

Texas Instruments
Low stock

The TLV1544IPWG4 from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-TSSOP package.

View full details

TLV1548CDBR

Texas Instruments
In stock

TLV1548CDBR from Texas Instruments is a Integrated Circuit 10-Bit 85 kSPS ADC Ser. Out, Pgrmable Pwr/Pwrdn/Conversion Rate, TMS320 DSP/SPI/QPSI Compat., 8 Ch. - Precision ADCs. The TLV1544 and TLV1548 are CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converters. Each device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provide a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The devices allow high-speed data transfers from the host. The (INV CLK) input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1544 and TLV1548 are designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1544 has four analog input channels while the TLV1548 has eight analog input channels. The TLV1544C and TLV1548C are characterized for operation from 0°C to 70°C. The TLV1544I and TLV1548I are characterized for operation over the full industrial temperature range of -40°C to 85°C. The TLV1548M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1549CP

Texas Instruments
In stock

The TLV1549CP from Texas Instruments is a 10-bit analog-to-digital converter with 1 input and 1 SAR, in an 8-PDIP package.

View full details

TLV1543CFN

Texas Instruments
In stock

The TLV1543CFN from Texas Instruments is a 10-bit analog-to-digital converter with 11 inputs and 1 SAR, in a 20-PLCC (9x9) package.

View full details

TLV1549ID

Texas Instruments
In stock

The TLV1549ID from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with 1 input, in an 8-SOIC package.

View full details

TLV1549CDG4

Texas Instruments
Low stock

The TLV1549CDG4 from Texas Instruments is a 10-bit analog-to-digital converter with 1 input and 1 SAR, in an 8-SOIC package.

View full details

TLV1544ID

Texas Instruments
In stock

The TLV1544ID from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-SOIC package.

View full details

TLV1544IPWR

Texas Instruments
In stock

The TLV1544IPWR from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-TSSOP package.

View full details

TLV1549CPE4

Texas Instruments
In stock

The TLV1549CPE4 from Texas Instruments is a 10-bit, 38 KSPS analog-to-digital converter (ADC) with serial output (INH).

View full details

TLV1548IDBR

Texas Instruments
In stock

TLV1548IDBR from Texas Instruments is a Integrated Circuit 10-Bit 85 kSPS ADC Ser. Out, Pgrmable Pwr/Pwrdn/Conversion Rate, TMS320 DSP/SPI/QPSI Compat., 8 Ch. - Precision ADCs. The TLV1544 and TLV1548 are CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converters. Each device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provide a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The devices allow high-speed data transfers from the host. The (INV CLK) input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1544 and TLV1548 are designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1544 has four analog input channels while the TLV1548 has eight analog input channels. The TLV1544C and TLV1548C are characterized for operation from 0°C to 70°C. The TLV1544I and TLV1548I are characterized for operation over the full industrial temperature range of -40°C to 85°C. The TLV1548M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1543CN

Texas Instruments
In stock

The TLV1543CN from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 11 inputs and 1 SAR, in a 20-PDIP package.

View full details

TLV1548IDB

Texas Instruments
In stock

TLV1548IDB from Texas Instruments is a Integrated Circuit 10-Bit 85 kSPS ADC Ser. Out, Pgrmable Pwr/Pwrdn/Conversion Rate, TMS320 DSP/SPI/QPSI Compat., 8 Ch. - Precision ADCs. The TLV1544 and TLV1548 are CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converters. Each device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provide a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The devices allow high-speed data transfers from the host. The (INV CLK) input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1544 and TLV1548 are designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1544 has four analog input channels while the TLV1548 has eight analog input channels. The TLV1544C and TLV1548C are characterized for operation from 0°C to 70°C. The TLV1544I and TLV1548I are characterized for operation over the full industrial temperature range of -40°C to 85°C. The TLV1548M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1549CPG4

Texas Instruments
Low stock

The TLV1549CPG4 from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 1 input and SAR architecture, in an 8-PDIP package.

View full details

TLV1544CDR

Texas Instruments
In stock

The TLV1544CDR from Texas Instruments is a 10-bit analog-to-digital converter with 4 inputs and 1 SAR, in a 16-SOIC package.

View full details

TLV1544CD

Texas Instruments
Low stock

The TLV1544CD from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-SOIC package.

View full details

TLV1543CFNR

Texas Instruments
In stock

The TLV1543CFNR from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with serial access.

View full details

TLV1544CPW

Texas Instruments
In stock

The TLV1544CPW from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with 4 inputs and 1 SAR, in a 16-TSSOP package.

View full details

TLV1549IDG4

Texas Instruments
Low stock

The TLV1549IDG4 from Texas Instruments is a 10-bit analog-to-digital converter with 1 input and 1 SAR, in an 8-SOIC package.

View full details

TLV1549CD

Texas Instruments
In stock

The TLV1549CD from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with SAR architecture in an 8-SOIC package.

View full details

TLV1543CDW

Texas Instruments
Low stock

The TLV1543CDW from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with 11 inputs and 1 SAR, in a 20-SOIC package.

View full details

TLV1548QDBRG4Q1

Texas Instruments
In stock

TLV1548QDBRG4Q1 from Texas Instruments is a Integrated Circuit Automotive Low-Voltage 10-Bit Analog-to-Digital Converter w/Serial Control & 8 Analog Input - Precision ADCs. The TLV1548 is a CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converter. The device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provides a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The device allows high-speed data transfers from the host. The INV CLK input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1548 is designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1548 has eight analog input channels. The TLV1548Q is characterized for operation over the full automotive temperature range of -40°C to 125°C.

View full details

TLV1549CDR

Texas Instruments
In stock

The TLV1549CDR from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 1 input and SAR architecture, in an 8-SOIC package.

View full details

TLV1543CDWR

Texas Instruments
In stock

The TLV1543CDWR from Texas Instruments is a 10-bit analog-to-digital converter (ADC) with 11 inputs and 1 SAR, in a 20-SOIC package.

View full details

TLV1548CDB

Texas Instruments
In stock

TLV1548CDB from Texas Instruments is a Integrated Circuit 10-Bit 85 kSPS ADC Ser. Out, Pgrmable Pwr/Pwrdn/Conversion Rate, TMS320 DSP/SPI/QPSI Compat., 8 Ch. - Precision ADCs. The TLV1544 and TLV1548 are CMOS 10-bit switched-capacitor successive-approximation (SAR) analog-to-digital (A/D) converters. Each device has a chip select (CS), input-output clock (I/O CLK), data input (DATA IN) and serial data output (DATA OUT) that provide a direct 4-wire synchronous serial peripheral interface (SPI™, QSPI™) port of a host microprocessor. When interfacing with a TMS320 DSP, an additional frame sync signal (FS) indicates the start of a serial data frame. The devices allow high-speed data transfers from the host. The (INV CLK) input provides further timing flexibility for the serial interface. In addition to a high-speed converter and versatile control capability, the device has an on-chip 11-channel multiplexer that can select any one of eight analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic except for the extended sampling cycle, where the sampling cycle is started by the falling edge of asynchronous CSTART. At the end of the A/D conversion, the end-of-conversion (EOC) output goes high to indicate that the conversion is complete. The TLV1544 and TLV1548 are designed to operate with a wide range of supply voltages with very low power consumption. The power saving feature is further enhanced with a software-programmed power-down mode and conversion rate. The converter incorporated in the device features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating temperature range. The TLV1544 has four analog input channels while the TLV1548 has eight analog input channels. The TLV1544C and TLV1548C are characterized for operation from 0°C to 70°C. The TLV1544I and TLV1548I are characterized for operation over the full industrial temperature range of -40°C to 85°C. The TLV1548M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1543MFKB

Texas Instruments
Low stock

The TLV1543MFKB from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with serial access.

View full details

TLV1543IDBRG4

Texas Instruments
Low stock

The TLV1543IDBRG4 from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) Integrated Circuit in a 20-SSOP package.

View full details

TLV1543CDB

Texas Instruments
In stock

TLV1543CDB from Texas Instruments is a Integrated Circuit 10-Bit 200 kSPS ADC Ser. Out, Built-In Self-Test Modes, Inherent S&H, Pin Compat. w/TLC1543, 11 Ch. - Precision ADCs. The TLV1543C, TLV1543I, and TLV1543M are CMOS 10-bit, switched-capacitor, successive-approximation, analog-to-digital converters. These devices have three inputs and a 3-state output [chip select (CS), input-output clock (I/O CLOCK), address input (ADDRESS), and data output (DATA OUT)] that provide a direct 4-wire interface to the serial port of a host processor. The devices allow high-speed data transfers from the host. In addition to a high-speed A/D converter and versatile control capability, these devices have an on-chip 14-channel multiplexer that can select any one of 11 analog inputs or any one of three internal self-test voltages. The sample-and-hold function is automatic. At the end of A/D conversion, the end-of-conversion (EOC) output goes high to indicate that conversion is complete. The converter incorporated in the devices features differential high-impedance reference inputs that facilitate ratiometric conversion, scaling, and isolation of analog circuitry from logic and supply noise. A switched-capacitor design allows low-error conversion over the full operating free-air temperature range. The TLV1543C is characterized for operation from 0°C to 70°C. The TLV1543I is characterized for industrial temperature range of -40°C to 85°C. The TLV1543M is characterized for operation over the full military temperature range of -55°C to 125°C.

View full details

TLV1549IP

Texas Instruments
In stock

The TLV1549IP from Texas Instruments is a 10-bit SAR analog-to-digital converter (ADC) with 1 input, in an 8-PDIP package.

View full details

Top Manufactures

Compare products

{"one"=>"Select 2 to 5 items to compare", "other"=>"{{ count }} of 5 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare