Search results for “TPS768”

TPS76830QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76825QPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850-Q1) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to the enable (EN) input shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active-high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx-Q1 is offered in 1.8-V, 2.5-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx-Q1 family is available in a 20-pin PWP package.

The TPS76818QDG4 from Texas Instruments is a linear voltage regulator Integrated Circuit with a fixed positive 1.8 V output rated 1 A, in an 8-SOIC package.

TPS76825QPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76825QPWPR from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76833QPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850-Q1) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to the enable (EN) input shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active-high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx-Q1 is offered in 1.8-V, 2.5-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx-Q1 family is available in a 20-pin PWP package.

TPS76850MPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76815QPWPR from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76833QPWPRG4 from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76801MPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76801QPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76833QPWPR from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76825QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76801QPWPG4 from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76801QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76801QPWPRG4 from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76801QPWPR from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76818QPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76850QPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76818QPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850-Q1) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to the enable (EN) input shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active-high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx-Q1 is offered in 1.8-V, 2.5-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx-Q1 family is available in a 20-pin PWP package.

TPS76818QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76850QPWPR from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76850QPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850-Q1) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to the enable (EN) input shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active-high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx-Q1 is offered in 1.8-V, 2.5-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx-Q1 family is available in a 20-pin PWP package.

TPS76850QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

TPS76833QPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76801QPWPRQ1 from Texas Instruments is a Integrated Circuit Automotive 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850-Q1) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to the enable (EN) input shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active-high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx-Q1 is offered in 1.8-V, 2.5-V, 3.3-V, and 5-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx-Q1 family is available in a 20-pin PWP package.

TPS76815QPWPREP from Texas Instruments is a Integrated Circuit Enhanced product, fast transient response 1-A low-dropout voltage regular - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator. The TPS768xx is offered in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V, 3.0-V, 3.3-V, and 5.0-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.2 V to 5.5 V). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS768xx family is available in a 20-pin PWP package.

TPS76815QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS76801QDRG4 from Texas Instruments is a linear voltage regulator Integrated Circuit with a positive adjustable output at 1 A, 1 output, in an 8-SOIC package.

The TPS76825QDG4 from Texas Instruments is a positive fixed linear voltage regulator Integrated Circuit with 1 output at 2.5 V and 1 A, in an 8-SOIC package.

TPS76833QPWP from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS76850QDR from Texas Instruments is a positive fixed linear voltage regulator Integrated Circuit with a single 5 V output rated at 1 A, in an 8-SOIC package.

The TPS76818QDRG4 from Texas Instruments is a linear voltage regulator Integrated Circuit with 1 fixed positive 1.8 V output at 1 A, in an 8-SOIC package.

The TPS76801QDR from Texas Instruments is a linear voltage regulator Integrated Circuit with a positive adjustable output at 1 A, 1 output, in an 8-SOIC package.

TPS76818QPWPR from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS76850QD from Texas Instruments is a positive fixed linear voltage regulator Integrated Circuit with 1 output rated at 1 A and 5 V, in an 8-SOIC package.

The TPS76825QD from Texas Instruments is a positive fixed linear voltage regulator Integrated Circuit with 1 output, rated 2.5 V and 1 A, in an 8-SOIC package.

The TPS76833QDRG4 from Texas Instruments is a positive fixed linear voltage regulator Integrated Circuit with 1 output at 3.3 V and 1 A, in an 8-SOIC package.

The TPS76815QDR from Texas Instruments is a linear voltage regulator Integrated Circuit with a positive fixed 1.5 V, 1 output and 1 A output current, in an 8-SOIC package.

TPS76833QPWPG4 from Texas Instruments is a Integrated Circuit 1-A, 10-V, low-dropout voltage regulator with power good & enable - Linear & low-dropout (LDO) regulators. This device is designed to have a fast transient response and be stable with 10 µF capacitors. This combination provides high performance at a reasonable cost. Since the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230 mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, because the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a shutdown mode; applying a TTL high signal to EN (enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at T J = 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS76850QDG4 from Texas Instruments is a linear voltage regulator Integrated Circuit with 1 fixed positive 5 V output at 1 A, in an 8-SOIC package.

The TPS76801QD from Texas Instruments is a linear voltage regulator Integrated Circuit with a positive adjustable output, 1 output at 1 A, in an 8-SOIC package.