Search results for “TRS3243”

TRS3243IDBR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection - RS-232 transceivers. The TRS3243 device consists of three line drivers, and five line receivers, which is ideal for DE-9 DTE interface. A ±15-kV ESD (HBM) protection pin-to-pin (serial-port connection pins, including GND). Flexible power features save power automatically. Special outputs ROUT2B and INVALID are always enabled to allow checking for ring indicator and valid RS232 input.

TRS3243IPW from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection - RS-232 transceivers. The TRS3243 device consists of three line drivers, and five line receivers, which is ideal for DE-9 DTE interface. A ±15-kV ESD (HBM) protection pin-to-pin (serial-port connection pins, including GND). Flexible power features save power automatically. Special outputs ROUT2B and INVALID are always enabled to allow checking for ring indicator and valid RS232 input.

TRS3243IPWR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection - RS-232 transceivers. The TRS3243 device consists of three line drivers, and five line receivers, which is ideal for DE-9 DTE interface. A ±15-kV ESD (HBM) protection pin-to-pin (serial-port connection pins, including GND). Flexible power features save power automatically. Special outputs ROUT2B and INVALID are always enabled to allow checking for ring indicator and valid RS232 input.

TRS3243CDBR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection - RS-232 transceivers. The TRS3243 device consists of three line drivers, and five line receivers, which is ideal for DE-9 DTE interface. A ±15-kV ESD (HBM) protection pin-to-pin (serial-port connection pins, including GND). Flexible power features save power automatically. Special outputs ROUT2B and INVALID are always enabled to allow checking for ring indicator and valid RS232 input.

TRS3243EIDBR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection - RS-232 transceivers. The TRS3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

TRS3243CPW from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 250kbps RS-232 line driver/receiver with +/-15-kV ESD protection - RS-232 transceivers. The TRS3243 device consists of three line drivers, and five line receivers, which is ideal for DE-9 DTE interface. A ±15-kV ESD (HBM) protection pin-to-pin (serial-port connection pins, including GND). Flexible power features save power automatically. Special outputs ROUT2B and INVALID are always enabled to allow checking for ring indicator and valid RS232 input.

TRS3243ECPW from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection - RS-232 transceivers. The TRS3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

The TRS3243EIDWR from Texas Instruments is a 3/5 full RS232 transceiver Integrated Circuit in a 28-SOIC package.

The TRS3243EIDW from Texas Instruments is a full RS232 transceiver Integrated Circuit rated 3/5, in a 28-SOIC package.

The TRS3243EIRHBRG4 from Texas Instruments is a full RS232 transceiver rated 3/5, in a 32-VQFN (5x5) package.

TRS3243ECPWR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection - RS-232 transceivers. The TRS3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

TRS3243EIDB from Texas Instruments is a IC TRANSCEIVER FULL 3/5 28SSOP

TRS3243EIPWR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection - RS-232 transceivers. The TRS3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

TRS3243ECDBR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 500kbps RS-232 line driver/receiver with +/-15-kV IEC-ESD protection - RS-232 transceivers. The TRS3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

The TRS3243EIRHBR from Texas Instruments is a full RS232 transceiver rated 3/5, in a 32-VQFN (5x5) package.

The TRS3243IDB from Texas Instruments is a 3/5 full RS232 transceiver Integrated Circuit in a 28-SSOP package.

The TRS3243ECDWR from Texas Instruments is a full-duplex RS232 transceiver Integrated Circuit with 3/5 channels, in a 28-SOIC package.

The TRS3243ECRHBR from Texas Instruments is a full RS232 transceiver Integrated Circuit rated 3/5, in a 32-VQFN (5x5) package.

The TRS3243ECDW from Texas Instruments is a 3/5 full RS232 transceiver in a 28-SOIC package.

The TRS3243CDWR from Texas Instruments is a full transceiver Integrated Circuit with a 3/5 configuration, in a 28-SOIC package.

The TRS3243IDWR from Texas Instruments is a full RS-232 transceiver Integrated Circuit with a 3/5 configuration in a 28-SOIC package.

The TRS3243IDW from Texas Instruments is a 3/5 full RS232 transceiver Integrated Circuit in a 28-SOIC package.

The TRS3243ECDB from Texas Instruments is a full RS232 transceiver with 3/5 configuration, in a 28-SSOP package.

The TRS3243CDB from Texas Instruments is a 3/5 full RS232 transceiver Integrated Circuit in a 28-SSOP package.

The TRS3243CDW from Texas Instruments is a 3/5 full RS232 transceiver Integrated Circuit in a 28-SOIC package.