Search results for “TRSF3243”

TRSF3243IPWR from Texas Instruments is a Integrated Circuit 3- to 5.5-V multichannel 1Mbps RS-232 line driver/receiver with +/-15-kV ESD protection - RS-232 transceivers. The TRSF3243 consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). This device provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, this device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 1 Mbit/s and an increased slew-rate range of 24 V/µs to 150 V/µs.

The TRSF3243IDB from Texas Instruments is a 3/5 full RS232 transceiver in a 28-SSOP package.

TRSF3243EIPWR from Texas Instruments is a Multichannel RS-232 compatible line driver/receiver (3T/5R) with 15-kV IEC ESD protection - RS-232 transceivers. The TRSF3243E consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. This device provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, this device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 1 Mbit/s and an increased slew-rate range of 18 V/µs to 150 V/µs. Flexible control options for power management are available when the serial port is inactive. The auto-powerdown feature functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal, the driver outputs are disabled. If FORCEOFF is set low, both drivers and receivers (except ROUT2B) are shut off, and the supply current is reduced to 1 µA. Disconnecting the serial port or turning off the peripheral drivers causes the auto-powerdown condition to occur. spacer

The TRSF3243IDBR from Texas Instruments is a full transceiver Integrated Circuit (3/5) in a 28-SSOP package.

The TRSF3243IDWG4 from Texas Instruments is a 3/5 full RS232 transceiver in a 28-SOIC package.

The TRSF3243IDWR from Texas Instruments is a full RS232 transceiver Integrated Circuit with a 3/5 configuration, in a 28-SOIC package.

The TRSF3243IDBRG4 from Texas Instruments is a 3/5 full RS232 transceiver in a 28-SSOP package.

The TRSF3243IDWRG4 from Texas Instruments is a full RS232 transceiver with 3/5 channels in a 28-SOIC package.

The TRSF3243CDWR from Texas Instruments is a 3/5 full RS232 transceiver in a 28-SOIC package.

The TRSF3243CDB from Texas Instruments is a full RS232 transceiver Integrated Circuit rated 3/5 in a 28-SSOP package.

The TRSF3243EIRHBR from Texas Instruments is a 3/5 transceiver with a full RS232 interface in a 32-VQFN (5x5) package.

The TRSF3243IDW from Texas Instruments is a 3/5 full RS232 transceiver in a 28-SOIC package.

The TRSF3243CDWG4 from Texas Instruments is a full RS232 3/5 transceiver Integrated Circuit in a 28-SOIC package.

The TRSF3243CDWRG4 from Texas Instruments is a full RS232 transceiver with a 3/5 configuration, in a 28-SOIC package.

The TRSF3243CDBRG4 from Texas Instruments is an RS232 full-duplex transceiver Integrated Circuit with a 3/5 configuration in a 28-SSOP package.

The TRSF3243CDW from Texas Instruments is a full-duplex 3/5 RS232 transceiver Integrated Circuit in a 28-SOIC package.

The TRSF3243CDBG4 from Texas Instruments is a full RS232 transceiver Integrated Circuit rated 3/5 in a 28-SSOP package.