Search results for “jm38510”
Products
JM38510/30005SDA
Texas InstrumentsJM38510/30005SDA from Texas Instruments is a JANS, 3-channel 3-input, 4.5V to 5.5V bipolar NAND gates - NAND gates. These devices contain three independent 3-input NAND gates. The SN5410, SN54LS10, and SN54S10 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN7410, SN74LS10 and SN74S10 are characterized for operation from 0°C to 70°C.
View full detailsJM38510/31004SDA
Texas InstrumentsJM38510/31004SDA from Texas Instruments is a JANS, 4-channel 2-input, 4.5V to 5.5V 16mA drive strength bipolar AND gate - AND gates. These devices contain four independent 2-input AND gates. The SN5408, SN54LS08, and SN54S08 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN7408, SN74LS08 and SN74S08 are characterized for operation from 0° to 70°C.
View full detailsJM38510/50407BRA
Texas InstrumentsThe JM38510/50407BRA from Texas Instruments is a PAL programmable logic device Integrated Circuit in a 20-pin CDIP package, with PLD Integrated Circuit macrocells.
View full detailsJM38510/65802B2A
Texas InstrumentsJM38510/65802B2A from Texas Instruments is a 3-Line To 8-Line Decoders/Demultiplexers - Digital demultiplexers & decoders. The SNx4HC138 devices are designed to be used in high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories using a fast enable circuit, the delay times of these decoders and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoders is negligible.
View full detailsJM38510/30001SCA
Texas InstrumentsJM38510/30001SCA from Texas Instruments is a JANS, 4-channel 2-input, 4.5V to 5.5V bipolar NAND gates - NAND gates. The SNx4xx00 devices contain four independent, 2-input NAND gates. The devices perform the Boolean function Y = A.B or Y = A + B in positive logic.
View full detailsJM38510/13901BIA
Analog Devices Inc.The JM38510/13901BIA from Analog Devices Inc. is a 4-quadrant analog multiplier/divider Integrated Circuit in a TO-100-10 package.
View full detailsJM38510/65352SCA
Texas InstrumentsThe JM38510/65352SCA from Texas Instruments is an HCT-series flip-flop with 2 functions and positive-edge triggering.
View full detailsJM38510/05052BCA
Texas InstrumentsThe JM38510/05052BCA from Texas Instruments is a dual 4-input CMOS gate Integrated Circuit (CD4012B-MIL).
View full detailsJM38510/17504BEA
Harris CorporationThe JM38510/17504BEA from Harris Corporation is a monostable multivibrator with 100 ns timing in a 16-CDIP package.
View full detailsJM38510/34603BSA
National SemiconductorThe JM38510/34603BSA from National Semiconductor is a D-type latch with 3-state output.
View full detailsJM38510/13901BCA
Analog Devices Inc.The JM38510/13901BCA from Analog Devices Inc. is a JAN multiplier Integrated Circuit (534TD) and 4-quadrant analog multiplier/divider, in a 14-CDIP package.
View full detailsJM38510/17601BEA
Texas InstrumentsJM38510/17601BEA from Texas Instruments is a CMOS 8-Bit Addressable Latch - Other latches. CD4099B 8-bit addressable latch is a serial-input, parallel-output storage register that can perform a variety of functions. Data are inputted to a particular bit in the latch when that bit is addressed (by means of input A0, A1, A2) and when WRITE DISABLE is at a low level. When WRITE DISABLE is high, data entry is inhibited; however, all 8 outputs can be continuously read independent of WRITE DISABLE and address inputs. A master RESET input is available, which resets all bits to a logic "0" level when RESET and WRITE DISABLE are at a high level. When RESET is at a high level, and WRITE RESET is at a low level, the latch acts as a 1-of-8 demultiplexer; the bit that is addressed has an active output which follows the data input, while all unaddressed bits are held to a logic "0" level. The CD4099B types are supplied in 16-lead hermetic dual-in-line ceramic packages (F3A suffix), 16-lead dual-in-line plastic package (E suffix), 16-lead small-outline package (M, M96, MT, and NSR suffixes), and 16-lead thin shrink small-outline packages (PW and PWR suffixes).
View full detailsJM38510/30701SEA
Texas InstrumentsJM38510/30701SEA from Texas Instruments is a JANS, 3-Line To 8-Line Decoders/Demultiplexers - Digital demultiplexers & decoders. These Schottky-clamped TTL MSI circuits are designed to be used in high-performance memory decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of these decoders and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the Schottky-clamped system decoder is negligible. The 'LS138, SN54S138, and SN74S138A decode one of eight lines dependent on the conditions at the three binary select inputs and the three enable inputs. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. All of these decoder/demultiplexers feature fully buffered inputs, each of which represents only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and to simplify system design. The SN54LS138 and SN54S138 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LS138 and SN74S138A are characterized for operation from 0°C to 70°C.
View full detailsJM38510/07701BFA
Texas InstrumentsJM38510/07701BFA from Texas Instruments is a 3-Line To 8-Line Decoders/Demultiplexers - Inverting buffers & drivers. These Schottky-clamped TTL MSI circuits are designed to be used in high-performance memory decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of these decoders and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the Schottky-clamped system decoder is negligible. The 'LS138, SN54S138, and SN74S138A decode one of eight lines dependent on the conditions at the three binary select inputs and the three enable inputs. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. All of these decoder/demultiplexers feature fully buffered inputs, each of which represents only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and to simplify system design. The SN54LS138 and SN54S138 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LS138 and SN74S138A are characterized for operation from 0°C to 70°C.
View full detailsJM38510/37701B2A
Texas InstrumentsJM38510/37701B2A from Texas Instruments is a 3-Line To 8-Line Decoders/Demultiplexers - Digital demultiplexers & decoders. The ´ALS138A and ´AS138 are 3-line to 8-line decoders/demultiplexers designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance systems, these devices can be used to minimize the effects of system decoding. When employed with high-speed memories with a fast enable circuit, the delay times of the decoder and the enable time of the memory are usually less than the typical access time of the memory. The effective system delay introduced by the Schottky-clamped system decoder is negligible. The conditions at the binary-select (A, B, and C) inputs and the three enable (G1,, and) inputs select one of eight output lines. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. The SN54ALS138A and SN54AS138 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ALS138A and SN74AS138 are characterized for operation from 0°C to 70°C.
View full detailsJM38510/65852BEA
Texas InstrumentsJM38510/65852BEA from Texas Instruments is a 3-Line To 8-Line Decoders/Demultiplexers - Digital demultiplexers & decoders
View full detailsJM38510/13902BCA
Analog Devices Inc.The JM38510/13902BCA from Analog Devices Inc. is a JAN analog multiplier Integrated Circuit, 534SD.
View full detailsJM38510/50401BRA
Texas InstrumentsThe JM38510/50401BRA from Texas Instruments is an OT PLD Integrated Circuit rated at 30 ns, using TTL logic in a CDIP20 package, with PLD Integrated Circuit macrocells.
View full detailsJM38510/30109SEA
Texas InstrumentsThe JM38510/30109SEA from Texas Instruments is a J-K flip-flop Integrated Circuit.
View full detailsJM38510/30701B2A
Texas InstrumentsJM38510/30701B2A from Texas Instruments is a 3-Line To 8-Line Decoders/Demultiplexers - Digital demultiplexers & decoders. These Schottky-clamped TTL MSI circuits are designed to be used in high-performance memory decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of these decoders and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the Schottky-clamped system decoder is negligible. The 'LS138, SN54S138, and SN74S138A decode one of eight lines dependent on the conditions at the three binary select inputs and the three enable inputs. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. All of these decoder/demultiplexers feature fully buffered inputs, each of which represents only one normalized load to its driving circuit. All inputs are clamped with high-performance Schottky diodes to suppress line-ringing and to simplify system design. The SN54LS138 and SN54S138 are characterized for operation over the full military temperature range of -55°C to 125°C. The SN74LS138 and SN74S138A are characterized for operation from 0°C to 70°C.
View full detailsJM38510/65305BEA
Texas InstrumentsThe JM38510/65305BEA from Texas Instruments is a dual JK-type flip-flop Integrated Circuit with 2 elements and 1 bit per element, negative edge, in a 16-CDIP (0.300" 7.62mm) package.
View full detailsJM38510/17504BEA
Texas InstrumentsThe JM38510/17504BEA from Texas Instruments is a CD4098B-MIL CMOS dual monostable multivibrator.
View full detailsJM38510/50403BRA
Texas InstrumentsThe JM38510/50403BRA from Texas Instruments is an OT PLD Integrated Circuit rated at 30 ns, using TTL logic in a CDIP20 package, with PLD Integrated Circuit macrocells.
View full detailsJM38510/30608B2A
Texas InstrumentsJM38510/30608B2A from Texas Instruments is a Parallel-Load 8-Bit Shift Registers - Shift registers. The ’165 and ’LS165A are 8-bit serial shift registers that shift the data in the direction of Q A toward Q H when clocked. Parallel-in access to each stage is made available by eight individual, direct data inputs that are enabled by a low level at the shift/load (SH/LD) input. These registers also feature gated clock (CLK) inputs and complementary outputs from the eighth bit. All inputs are diode-clamped to minimize transmission-line effects, thereby simplifying system design. Clocking is accomplished through a two-input positive-NOR gate, permitting one input to be used as a clock-inhibit function. Holding either of the clock inputs high inhibits clocking, and holding either clock input low with SH/LD high enables the other clock input. Clock inhibit (CLK INH) should be changed to the high level only while CLK is high. Parallel loading is inhibited as long as SH/LD is high. Data at the parallel inputs are loaded directly into the register while SH/LD is low, independently of the levels of CLK, CLK INH, or serial (SER) inputs.
View full detailsJM38510/37104BRA
Texas InstrumentsThe JM38510/37104BRA from Texas Instruments is a 54ALS574B octal D-type edge-triggered Integrated Circuit with element bit per element output.
View full detailsJM38510/05053BCA
Texas InstrumentsJM38510/05053BCA from Texas Instruments is a CMOS Triple 3-Input NAND Gate - NAND gates. CD4011B, CD4012B, and CD4023B NAND gates provide the system designer with direct implementation of the NAND function and supplement the existing family of CMOS gates. All inputs and outputs are buffered. The CD4011B, CD4012B, and CD4023B types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PWR suffix). The CD4011B and CD4023B types also are supplied in 14-lead thin shrink small-outline packages (PW suffix).
View full detailsJM38510/38301BRA
Texas InstrumentsThe JM38510/38301BRA from Texas Instruments is a 54ALS240A octal buffers/drivers Integrated Circuit with element bit per element output.
View full detailsJM38510/37204BRA
Texas InstrumentsThe JM38510/37204BRA from Texas Instruments is a 54ALS374A octal D-type edge-triggered flip-flop Integrated Circuit with element bit per element output.
View full detailsJM38510/65852BFA
Texas InstrumentsThe JM38510/65852BFA from Texas Instruments is a 3-line-to-8 decoder Integrated Circuit.
View full detailsJM38510/12205BPA
IntersilThe JM38510/12205BPA from Intersil is a general-purpose amplifier with 1 circuit in an 18-CERDIP package.
View full detailsJM38510/65601B2A
Texas InstrumentsThe JM38510/65601B2A from Texas Instruments is an HC/UH series logic device with 1 function and positive E.
View full detailsJM38510/34603B2A
National SemiconductorThe JM38510/34603B2A from National Semiconductor is a D-type latch Integrated Circuit with 3-state output, channel Integrated Circuit type.
View full detailsJM38510/32502SRA
Texas InstrumentsJM38510/32502SRA from Texas Instruments is a JANS, Octal D-Type Transparent Latches with 3-state Outputs - D-type latches. These 8-bit registers feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The high-impedance 3-state and increased high-logic-level drive provide these registers with the capability of being connected directly to and driving the bus lines in a bus-organized system without need for interface or pullup components. These devices are particularly attractive for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. The eight latches of the ’LS373 and ’S373 are transparent D-type latches, meaning that while the enable (C or CLK) input is high, the Q outputs follow the data (D) inputs. When C or CLK is taken low, the output is latched at the level of the data that was set up. The eight flip-flops of the ’LS374 and ’S374 are edge-triggered D-type flip-flops. On the positive transition of the clock, the Q outputs are set to the logic states that were set up at the D inputs. Schmitt-trigger buffered inputs at the enable/clock lines of the ’S373 and ’S374 devices simplify system design as ac and dc noise rejection is improved by typically 400 mV due to the input hysteresis. A buffered output-control (OC) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. OC does not affect the internal operation of the latches or flip-flops. That is, the old data can be retained or new data can be entered, even while the outputs are off.
View full detailsJM38510/05353BCA
Harris CorporationThe JM38510/05353BCA from Harris Corporation is a CMOS XOR (exclusive OR) logic Integrated Circuit with 4 channels in a 14-CDIP package.
View full detailsJM38510/30602B2A
Texas InstrumentsJM38510/30602B2A from Texas Instruments is a 4-Bit Parallel-Access Shift Registers - Shift registers. These 4-bit registers feature parallel inputs, parallel outputs, J-K serial inputs, shift/load (SH/LD) control input, and a direct overriding clear. All inputs are buffered to lower the input drive requirements. The register has two modes of operation: Parallel (broadside) loadShift (in the direction Q A toward Q D) Parallel loading is accomplished by applying the four bits of data and taking SH/LD low. The data is loaded into the associated flip-flop and appears at the outputs after the positive transition of the clock input. During loading, serial data flow is inhibited. Shifting is accomplished synchronously when SH/LD is high. Serial data for this mode is entered at the J-K inputs. These inputs permit the first stage to perform as a J-K, D-, or T-type flip-flop as shown in the function table. The high-performance 'S195, with a 105-megahertz typical maximum shift-frequency, is particularly attractive for very-high-speed data processing systems. In most cases existing systems can be upgraded merely by using this Schottky-clamped shift register.
View full detailsJM38510/38001B2A
Texas InstrumentsJM38510/38001B2A from Texas Instruments is a Synchronous 4-Bit Binary Counters - Counters. These synchronous, presettable, 4-bit decade and binary counters feature an internal carry look-ahead circuitry for application in high-speed counting designs. The SN54ALS162B is a 4-bit decade counter. The x92ALS161B, x92ALS163B, x92AS161, and x92AS163 devices are 4-bit binary counters. Synchronous operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincidentally with each other when instructed by the count-enable (ENP, ENT) inputs and internal gating. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters. A buffered clock (CLK) input triggers the four flip-flops on the rising (positive-going) edge of the clock input waveform. These counters are fully programmable; they can be preset to any number between 0 and 9 or 15. Because presetting is synchronous, setting up a low level at the load (LOAD) input disables the counter and causes the outputs to agree with the setup data after the next clock pulse, regardless of the levels of the enable inputs. The clear function for the x92ALS161B and x92AS161 devices is asynchronous. A low level at the clear (CLR) input sets all four of the flip-flop outputs low, regardless of the levels of the CLK, LOAD, or enable inputs. The clear function for the SN54ALS162B, x92ALS163B, and x92AS163 devices is synchronous, and a low level at CLR sets all four of the flip-flop outputs low after the next clock pulse, regardless of the levels of the enable inputs. This synchronous clear allows the count length to be modified easily by decoding the Q outputs for the maximum count desired. The active-low output of the gate used for decoding is connected to CLR to synchronously clear the counter to 0000 (LLLL). The carry look-ahead circuitry provides for cascading counters for n-bit synchronous applications without additional gating. ENP and ENT inputs and a ripple-carry (RCO) output are instrumental in accomplishing this function. Both ENP and ENT must be high to count, and ENT is fed forward to enable RCO. RCO, thus enabled, produces a high-level pulse while the count is maximum (9 or 15, with Q A high). The high-level overflow ripple-carry pulse can be used to enable successive cascaded stages. Transitions at ENP or ENT are allowed, regardless of the level of CLK. These counters feature a fully independent clock circuit. Changes at control inputs (ENP, ENT, or LOAD) that modify the operating mode have no effect on the contents of the counter until clocking occurs. The function of the counter (whether enabled, disabled, loading, or counting) is dictated solely by the conditions meeting the stable setup and hold times. The SN54ALS161B, SN54ALS162B, SN54ALS163B, SN54AS161, and SN54AS163 are characterized for operation over the full military temperature range of x9655°C to 125°C. The SN74ALS161B, SN74ALS163B, SN74AS161, and SN74AS163 are characterized for operation from 0°C to 70°C.
View full detailsJM38510/12501SGA
Texas InstrumentsJM38510/12501SGA from Texas Instruments is a JANS, Monolithic Sample and Hold Circuit - Sample & hold amplifiers. The LF198 is a monolithic sample-and-hold circuit which utilizes BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate. Operating as a unity gain follower, dc gain accuracy is 0.002% typical and acquisition time is as low as 6 μs to 0.01%. A bipolar input stage is used to achieve low offset voltage and wide bandwidth. Input offset adjust is accomplished with a single pin, and does not degrade input offset drift. The wide bandwidth allows the LF198 to be included inside the feedback loop of 1 MHz op amps without having stability problems. Input impedance of 10 10 Ω allows high source impedances to be used without degrading accuracy. P-channel junction FET's are combined with bipolar devices in the output amplifier to give droop rates as low as 5 mV/min with a 1 μF hold capacitor. The JFET's have much lower noise than MOS devices used in previous designs and do not exhibit high temperature instabilities. The overall design ensures no feed-through from input to output in the hold mode, even for input signals equal to the supply voltages.
View full detailsJM38510/32501SRA
Texas InstrumentsThe JM38510/32501SRA from Texas Instruments is a D-type flip-flop Integrated Circuit with clear, 8 B.
View full detailsJM38510/11804SYA
Texas InstrumentsJM38510/11804SYA from Texas Instruments is a -4.2V to -40V, 1.5A adjustable output negative linear regulator - Linear & low-dropout (LDO) regulators. The LM137 are adjustable 3-terminal negative voltage regulators capable of supplying in excess of -1.5A over an output voltage range of -37V to -1.2V. These regulators are exceptionally easy to apply, requiring only 2 external resistors to set the output voltage and 1 output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. Further, the LM137 series features internal current limiting, thermal shutdown and safe-area compensation, making them virtually blowout-proof against overloads. The LM137 serves a wide variety of applications including local on-card regulation, programmable-output voltage regulation or precision current regulation. The LM137 are ideal complements to the LM117 adjustable positive regulators.
View full detailsJM38510/34106B2A
National SemiconductorThe JM38510/34106B2A from National Semiconductor is a 54F534 D-type flip-flop Integrated Circuit with 3-state outputs, 1 element, 8-bit, positive edge, in a 20-CLCC package.
View full detailsJM38510/36001B2A
Texas InstrumentsJM38510/36001B2A from Texas Instruments is a 10-Line To 4-Line And 8-Line To 3-Line Priority Encoders - Digital multiplexers & encoders. These TTL encoders feature priority decoding of the inputs to ensure that only the highest-order data line is encoded. The '147 and 'LS147 encode nine data lines to four-line (8-4-2-1) BCD. The implied decimal zero condition requires no input condition as zero is encoded when all nine data lines are at a high logic level. The '148 and 'LS148 encode eight data lines to three-line (4-2-1) binary (octal). Cascading circuitry (enable input E1 and enable output E0) has been provided to allow octal expansion without the need for external circuitry. For all types, data inputs and outputs are active at the low logic level. All inputs are buffered to represent one normalized Series 54/74 or 54LS/74LS load, respectively.
View full detailsJM38510/13301BEA
Analog Devices Inc.The JM38510/13301BEA from Analog Devices Inc. is a 10-bit mono digital-to-analog converter (DAC) in a 16-CDIP package.
View full detailsJM38510/33701BEA
Texas InstrumentsJM38510/33701BEA from Texas Instruments is a 3-Line To 8-Line Decoders/Demultiplexers - Digital demultiplexers & decoders. The ´F138 is designed to be used in high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimize the effects of system decoding. When employed with high-speed memories utilizing a fast enable circuit, the delay times of this decoder and the enable time of the memory are usually less than the typical access time of the memory. This means that the effective system delay introduced by the decoder is negligible. The conditions at the binary-select inputs and the three enable inputs select one of eight output lines. Two active-low and one active-high enable inputs reduce the need for external gates or inverters when expanding. A 24-line decoder can be implemented without external inverters and a 32-line decoder requires only one inverter. An enable input can be used as a data input for demultiplexing applications. The SN54F138 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74F138 is characterized for operation from 0°C to 70°C.
View full detailsJM38510/34105B2A
Texas InstrumentsThe JM38510/34105B2A from Texas Instruments is a 54F374 octal edge-triggered D-type Integrated Circuit with element bit per element output.
View full detailsJM38510/07802BEA
Texas InstrumentsJM38510/07802BEA from Texas Instruments is a Look-Ahead Carry Generators - Specialty logic ICs. The SN54S182 and SN74S182 are high-speed, look-ahead carry generators capable of anticipating a carry across four binary adders or group of adders. They are cascadable to perform full look-ahead across n-bit adders. Carry, generate-carry, and propagate-carry functions are provided as enumerated in the pin designation table above. When used in conjunction with the 'LS181 or 'S181 arithmetic logic unit (ALU), these generators provide high-speed carry look-ahead capability for any word length. Each 'S182 generates the look-ahead (anticipated carry) across a group of four ALUs and, in addition, other carry look-ahead circuits may be employed to anticipate carry across sections of four look-ahead packages up to n-bits. The method of cascading 'S182 circuits to perform multilevel look-ahead is illustrated under typical application data. The carry functions (inputs, outputs, generate, and propagate) of the look-ahead generators are implemented in the compatible forms for direct connection to the ALU. Reinterpretations of carry functions as explained on the 'LS181 and 'S181 data sheet are also applicable to and compatible with the look-ahead generator. Logic equations for the 'S182 are:
View full detailsJM38510/33902BFA
National SemiconductorThe JM38510/33902BFA from National Semiconductor is a dual 1-of-4 data selector, 54F153 type.
View full detailsJM38510/07801BJA
Texas InstrumentsJM38510/07801BJA from Texas Instruments is a Arithmetic Logic Units/Function Generators - Specialty logic ICs. The 'LS181 and 'S181 are arithmetic logic units (ALU)/function generators that have a complexity of 75 equivalent gates on a monolithic chip. These circuits perform 16 binary arithmetic operations on two 4-bit words as shown in Tables 1 and 2. These operations are selected by the four function-select lines (S0, S1, S2, S3) and include addition, subtraction, decrement, and straight transfer. When performing arithmetic manipulations, the internal carries must be enabled by applying a low-level voltage to the mode control input (M). A full carry look-ahead scheme is made available in these devices for fast, simultaneous carry generation by means of two cascade-outputs (pins 15 and 17) for the four bits in the package. When used in conjunction with the SN54S182 or SN74S182 full carry look-ahead circuits, high-speed arithmetic operations can be performed. The typical addition times shown above illustrate the little additional time required for addition of longer words when full carry look-ahead is employed. The method of cascading 'S182 circuits with these ALUs to provide multi-level full carry look-ahead is illustrated under typical applications data for the 'S182. If high speed is not of importance, a ripple-carry input (C n) and a ripple-carry output (C n+4) are available. However, the ripple-carry delay has also been minimized so that arithmetic manipulations for small word lengths can be performed without external circuitry. The 'LS181 and 'S181 will accommodate active-high data if the pin designations are interpreted as follows: Subtraction is accomplished by 1's complement addition where the 1's complement of the subtrahend is generated internally.The resultant output is A - B - 1, which requires an end-around or forced carry to provide A - B. The 'LS181 or 'S181 can also be utilized as a comparator. The A = B output is internally decoded from the function outputs (F0, F1, F2, F3) so that when two words of equal magnitude are applied at the A and B inputs, it will assume a high level to indicate equality (A = B). The ALU must be in the subtract mode with C n = H when performing this comparison. The A = B output is open-collector so that it can be wire-AND connected to give a comparison for more than four bits. The carry output (C n+4) can also be used to supply relative magnitude information. Again, the ALU must be placed in the subtract mode by placing the function select inputs S3, S2, S1, S0 at L, H, H, L, respectively. These circuits have been designed to not only incorporate all of the designer's requirements for arithmetic operations, but also to provide 16 possible functions of two Boolean variables without the use of external circuitry. These logic functions are selected by use of the four function-select inputs (S0, S1, S2, S3) with the mode-control input (M) at a high level to disable the internal carry. The 16 logic functions are detailed in Tables 1 and 2 and include exclusive-OR, NAND, AND, NOR, and OR functions. Series 54, 54LS, and 54S devices are characterized for operation over the full military temperature range of -55°C to 125°C; Series 74LS and 74S devices are characterized for operation from 0°C to 70°C.
View full detailsJM38510/30609B2A
Texas InstrumentsJM38510/30609B2A from Texas Instruments is a Parallel-Load 8-Bit Shift Registers - Shift registers. The '166 and 'LS166A 8-bit shift registers are compatible with most other TTL logic families. All '166 and 'LS166A inputs are buffered to lower the drive requirements to one Series 54/74 or Series 54LS/74LS standard load, respectively. Input clamping diodes minimize switching transients and simplify system design. These parallel-in or serial-in, serial-out shift registers have a complexity of 77 equivalent gates on a monolithic chip. They feature gated clock inputs and an overriding clear input. The parallel-in or serial-in modes are established by the shift/load input. When high, this input enables the serial data input and couples the eight flip-flops for serial shifting with each clock pulse. When low, the parallel (broadside) data inputs are enabled and synchronous loading occurs on the next clock pulse. During parallel loading, serial data flow is inhibited. Clocking is accomplished on the low-to-high-level edge of the clock pulse through a two-input positive NOR gate permitting one input to be used as a clock-enable or clock-inhibit function. Holding either of the clock inputs high inhibits clocking; holding either low enables the other clock input. This, of course, allows the system clock to be free-running and the register can be stopped on command with the other clock input. The clock inhibit input should be changed to the high level only while the clock input is high. A buffered, direct clear input overrides all other inputs, including the clock, and sets all flip-flops to zero.
View full details