Search results for “mdcc”

MDCC-5006 from Astrodyne TDI is a AC/DC CONVERTER +/-12V 5W

ZS-MDC11 from Omron Automation and Safety is a CONTROLLER MULTI-CONTROLLER NPN

MDC00100 from Red Lion Controls is a MOTOR DRIVE CONTROLLER

MDC500001 from Diodes Incorporated is a XTAL OSC XO 125.0000MHZ CMOS

DS90LV011A MDC from Texas Instruments is a Integrated Circuit DRIVER 1/0 DIESALE

LMH6609 MDC from Texas Instruments is a Integrated Circuit 900MHz Voltage Feedback Op Amp - Die & wafer services. The LMH6609 is an ultra wideband, unity gain stable, low power, voltage feedback op amp that offers 900MHz bandwidth at a gain of 1, 1400V/μs slew rate and 90mA of linear output current. The LMH6609 is designed with voltage feedback architecture for maximum flexibility especially for active filters and integrators. The LMH6609 has balanced, symmetrical inputs with well-matched bias currents and minimal offset voltage. With Differential Gain of 0.01% and Differential Phase of 0.026° the LMH6609 is suited for video applications. The 90mA of linear output current makes the LMH6609 suitable for multiple video loads and cable driving applications as well. The supply voltage is specified at 6.6V and 10V. A low supply current of 7mA (at 10V supply) makes the LMH6609 useful in a wide variety of platforms, including portable or remote equipment that must run from battery power. The LMH6609 is available in the industry standard 8-pin SOIC package and in the space-saving 5-pin SOT-23 package. The LMH6609 is specified for operation over the -40°C to +85°C temperature range. The LMH6609 is manufactured in state-of-the-art VIP10 technology for high performance.

LM6211 MDC from Texas Instruments is a Integrated Circuit Military-grade, single, 24-V, 17-MHz, RRO operational amplifier - Die & wafer services. The LM6211 is a wide bandwidth, low noise op amp with a wide supply voltage range and a low input bias current. The LM6211 operates with a single supply voltage of 5V to 24V, is unity gain stable, has a ground-sensing CMOS input stage, and offers rail-to-rail output swing. The LM6211 is designed to provide optimal performance in high voltage, low noise systems. The LM6211 has a unity gain bandwidth of 20 MHz and an input referred voltage noise density of 5.5 nV/√ Hz at 10 kHz. The LM6211 achieves these specifications with a low supply current of only 1 mA. The LM6211 has a low input bias current of 2.3 pA, an output short circuit current of 25 mA and a slew rate of 5.6 V/us. The LM6211 also features a low common-mode input capacitance of 5.5 pF which makes it ideal for use in wide bandwidth and high gain circuits. The LM6211 is well suited for low noise applications that require an op amp with very low input bias currents and a large output voltage swing, like active loop-filters for wide-band PLLs. A low total harmonic distortion, 0.01% at 1 kHz with loads as high as 600Ω, also makes the LM6211 ideal for high fidelity audio and microphone amplifiers. The LM6211 is available in the small SOT-23 package, allowing the user to implement ultra-small and cost effective board layouts.

LMH6629 MDC from Texas Instruments is a Integrated Circuit OPAMP VFB 1 CIRCUIT DIESALE

SCP-MDC from SolaHD is a METAL DIN CLIP W/SCREW SCP/SLP

LM3046 MDC from Texas Instruments is a PROTOTYPE

LMH6702 MDC from Texas Instruments is a Integrated Circuit 1.7 GHz, Ultra Low Distortion, Wideband Op Amp - Die & wafer services. The LMH6702-MIL is a very wideband, DC-coupled monolithic operational amplifier designed specifically for wide dynamic range systems requiring exceptional signal fidelity. Benefitting from current feedback architecture, the LMH6702-MIL offers unity gain stability at exceptional speed without need for external compensation. With its 720-MHz bandwidth (A V = 2 V/V, V O = 2 V PP), 10-bit distortion levels through 60-MHz (R L = 100 Ω), 1.83-nV/√ Hz input referred noise and 12.5-mA supply current, the LMH6702-MIL is the ideal driver or buffer for high-speed flash A-D and D-A converters. Wide dynamic range systems such as radar and communication receivers that require a wideband amplifier offering exceptional signal purity will find the low input referred noise and low harmonic and intermodulation distortion of the LMH6702-MIL an attractive high speed solution. The LMH6702-MIL is constructed using VIP10™ complimentary bipolar process and proven current feedback architecture. The LMH6702-MIL is available in SOIC and SOT-23 packages.

LM393 MDC from Texas Instruments is a Integrated Circuit Dual Differential Comparator - Die & wafer services. These devices consist of two independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and V CC is at least 1.5 V more positive than the input common-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM393-MIL device is characterized for operation from 0°C to 70°C.

LM134 MDC from Texas Instruments is a Integrated Circuit 3-Terminal Adjustable Current Source - Current references & sources. The LM134/LM234/LM334 are 3-terminal adjustable current sources featuring 10,000:1 range in operating current, excellent current regulation and a wide dynamic voltage range of 1V to 40V. Current is established with one external resistor and no other parts are required. Initial current accuracy is ±3%. The LM134/LM234/LM334 are true floating current sources with no separate power supply connections. In addition, reverse applied voltages of up to 20V will draw only a few dozen microamperes of current, allowing the devices to act as both a rectifier and current source in AC applications. The sense voltage used to establish operating current in the LM134 is 64mV at 25°C and is directly proportional to absolute temperature (°K). The simplest one external resistor connection, then, generates a current with ≈+0.33%/°C temperature dependence. Zero drift operation can be obtained by adding one extra resistor and a diode. Applications for the current sources include bias networks, surge protection, low power reference, ramp generation, LED driver, and temperature sensing. The LM234-3 and LM234-6 are specified as true temperature sensors with ensured initial accuracy of ±3°C and ±6°C, respectively. These devices are ideal in remote sense applications because series resistance in long wire runs does not affect accuracy. In addition, only 2 wires are required. The LM134 is specified over a temperature range of -55°C to +125°C, the LM234 from -25°C to +100°C and the LM334 from 0°C to +70°C. These devices are available in TO hermetic, TO-92 and SOIC-8 plastic packages.

MDC500-16IO1 from IXYS is a DIODE MODULE 1600V WC-500

LMH6639 MDC from Texas Instruments is a Integrated Circuit 190MHz Rail-to-Rail Output Amplifier with Disable - Die & wafer services. The LMH6639 is a voltage feedback operational amplifier with a rail-to-rail output drive capability of 110mA. Employing TI’s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common mode voltage range extending to 0.2V below the V - and to within 1V of V +, makes the LMH6639 a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications. The LMH6639 offers a slew rate of 172V/μs resulting in a full power bandwidth of approximately 28MHz. The LMH6639 also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The T ON value of 83nsec combined with a settling time of 33nsec makes this device ideally suited for multiplexing applications (see application note for details). Careful attention has been paid to ensure device stability under all operating voltages and modes. The result is a very well behaved frequency response characteristic for any gain setting including +1, and excellent specifications for driving video cables including harmonic distortion of -60dBc, differential gain of 0.12% and differential phase of 0.045°

MDC500-12IO1 from IXYS is a DIODE MODULE 1200V WC-500

MDC-179-SMA from MACOM Technology Solutions is a MIXER,TB,RF, TIM

DAC0800 MDC from Texas Instruments is a Integrated Circuit DAC 8BIT A-OUT DIE

LM5575Q0-MDC/S2 from Texas Instruments is a PROTOTYPE

MDC500-14IO1 from IXYS is a DIODE MODULE 1400V WC-500

MDC500-20IO1 from IXYS is a DIODE MODULE 2000V WC-500