Motor Drivers, Controllers

The DRV8812RHDT from Texas Instruments is a bipolar motor driver Integrated Circuit with a parallel power MOSFET interface, rated 8.2 to 45 V, in a 28-VQFN (5x5) package.

The LM4570LQ/NOPB from Texas Instruments is a motor driver Integrated Circuit with a parallel power MOSFET interface, rated 2.4 to 5.5 V, in an 8-WQFN (2x2) package.

The DRV8301QDCAQ1 from Texas Instruments is a motor driver Integrated Circuit with a SPI-controlled power MOSFET interface, rated 6 to 60 V, in a 56-HTSSOP package.

The DRV8425PRGER from Texas Instruments is a bipolar motor driver Integrated Circuit with power MOSFETs and PWM control, in a 24-VQFN (4x4) package.

The DRV8706HQRHBRQ1 from Texas Instruments is an automotive 40 V H-bridge smart motor driver Integrated Circuit.

The NCV7710DQBR2G from onsemi is a motor driver Integrated Circuit in a 36-SSOP package.

DRV8425PWPR from Texas Instruments is a 35V, 2A bipolar stepper motor driver with integrated current sensing and 1/256 microstepping - Stepper motor drivers. The DRV8424/25 are stepper motor drivers for industrial and consumer applications. The device is fully integrated with two N-channel power MOSFET H-bridge drivers, a microstepping indexer, and integrated current sensing. The DRV8424 is capable of driving up to 2.5-A full-scale output current; and the DRV8425 is capable of driving up to 2-A full-scale output current (dependent on PCB design). The DRV8424/25 use an internal current sense architecture to eliminate the need for two external power sense resistors, saving PCB area and system cost. The devices use an internal PWM current regulation scheme selectable between smart tune, slow and mixed decay options. Smart tune automatically adjusts for optimal current regulation, compensates for motor variation and aging effects and reduces audible noise from the motor. A simple STEP/DIR interface allows an external controller to manage the direction and step rate of the stepper motor. The device can be configured in full-step to 1/256 microstepping. A low-power sleep mode is provided using a dedicated nSLEEP pin. Protection features are provided for supply undervoltage, charge pump faults, overcurrent, short circuits, and overtemperature. Fault conditions are indicated by the nFAULT pin.

The DRV8425RGER from Texas Instruments is a motor driver Integrated Circuit.

The DRV8705SQRHBRQ1 from Texas Instruments is an automotive 40 V H-bridge smart motor driver Integrated Circuit.

The DRV8876QPWPRQ1 from Texas Instruments is a motor driver Integrated Circuit.

The DRV8706SQRHBRQ1 from Texas Instruments is an automotive 40 V H-bridge smart motor driver Integrated Circuit.

The DRV8705HQRHBRQ1 from Texas Instruments is a motor driver Integrated Circuit.

The TB62214AFG,8,EL from Toshiba Semiconductor and Storage is a bipolar motor driver Integrated Circuit in a 28-HSOP package.

DRV8425PPWPR from Texas Instruments is a 35V, 2A bipolar stepper or dual brushed motor driver with integrated current sensing - Stepper motor drivers. The DRV8424E/P, DRV8425E/P devices are dual H-bridge motor drivers for a wide variety of industrial applications. The devices can be used for driving two DC motors, or a bipolar stepper motor. The output stage of the driver consists of N-channel power MOSFETs configured as two full H-bridges, charge pump regulator, current sensing and regulation, and protection circuitry. The integrated current sensing uses an internal current mirror architecture, removing the need for a large power shunt resistor, saving board area and reducing system cost. A low-power sleep mode is provided to achieve ultra- low quiescent current draw by shutting down most of the internal circuitry. Internal protection features are provided for supply undervoltage lockout (UVLO), charge pump undervoltage (CPUV), output overcurrent (OCP), and device overtemperature (OTSD). The DRV8424E/P is capable of driving a stepper motor with up to 2.5-A full scale or brushed motors with up to 4-A peak; and the DRV8425E/P is capable of driving a stepper motor with up to 2-A full scale or brushed motors with up to 3.2-A peak (dependent on PCB design).

The TB62208FTG,C8,EL from Toshiba Semiconductor and Storage is a bipolar motor driver Integrated Circuit operating from 4.5 to 5.5 V, in a 48-QFN package.

The LV8711TL-TLM-H from onsemi is a bipolar motor driver Integrated Circuit operating from 2.7 to 5.5 V, in a 24-SSOP package.

The STK681-360-E from onsemi is a DC motor driver for forward and reverse operation.

The TLE9185QXXUMA1 from Infineon Technologies is a 3PH motor driver Integrated Circuit rated 5 V and 250 mA, in a 48-VQFN package.

The ATA6824C-MFHW from Microchip Technology is a motor driver controller Integrated Circuit with a 6.5 to 22.7 V supply range, power MOSFET and serial interface, in a 32-TQFP (7x7) package.

The L6205N from STMicroelectronics is a bipolar motor driver Integrated Circuit with BiCDMOS technology and parallel control, operating from 8 to 52 V, in a 20-PowerDIP package.

The DRV8832QDGQQ1 from Texas Instruments is a bipolar motor driver with power MOSFET and parallel configuration, rated 2.75 to 6.8 V, in a 10-HVSSOP package.

The DRV8829PWP from Texas Instruments is a bipolar motor driver with power MOSFET and parallel configuration, rated 8.2 to 45 V, in a 28-HTSSOP package.

The DRV3203QPHPQ1 from Texas Instruments is an NMOS motor driver with SPI interface, rated 5.3 to 28.5 V, in a 48-HTQFP (7x7) package.

The DRV8881PPWP from Texas Instruments is a bipolar motor driver Integrated Circuit with power MOSFET outputs and parallel control, in a 28-HTSSOP package.

The L6258EXTR from STMicroelectronics is a bipolar DMOS motor driver Integrated Circuit with parallel control, in a PowerSO-36 package with bottom pad.

The TLE6281G from Infineon Technologies is a multiphase NMOS PWM motor driver with step/direction control, in a PG-DSO-20 package.

The TLE4206-2G from Infineon Technologies is a bipolar parallel motor driver for servo and stepper motors in a PG-DSO-14-22 package.

The TLE4207GXT from Infineon Technologies is an integrated half-bridge motor driver Integrated Circuit with a parallel configuration, supplied in a PG-DSO-14 package.

The TLE4207G from Infineon Technologies is an integrated half-bridge motor driver Integrated Circuit with a parallel configuration, supplied in a PG-DSO-14-22 package.

The STK672-632AN-E from onsemi is a unipolar motor driver Integrated Circuit with power MOSFET and parallel interface, in a 19-SIP package.

The STK672-640AN-E from onsemi is a unipolar motor driver Integrated Circuit with power MOSFET and parallel interface, in a 19-SIP package.

The STK672-642AN-E from onsemi is a unipolar motor driver Integrated Circuit with power MOSFET and parallel interface, in a 19-SIP package.

The TLE4726G from Infineon Technologies is a bipolar motor driver Integrated Circuit with a bipolar parallel configuration for servo and stepper motors, in a PG-DSO-24-13 package.

The DRV8802PWP from Texas Instruments is a motor driver Integrated Circuit operating from 8.2 V to 45 V, in a 28-HTSSOP package.

The DRV8828PWP from Texas Instruments is a bipolar motor driver Integrated Circuit operating from 8.2 V to 45 V, in a 28-SSOP package.