Translators, Level Shifters

The 74AVCB164245GRG4 from Texas Instruments is a bidirectional voltage level translator with 2 circuits and 8 channels, in a 48-TSSOP package.

The 74GTLP1394DGVRE4 from Texas Instruments is a mixed-signal bidirectional translator with 1 circuit and 2 channels, in a 16-TVSOP package.

The CD4504BME4 from Texas Instruments is a unidirectional voltage level translator with 1 circuit and 6 channels, in a 16-SOIC package.

The CD40109BPWRE4 from Texas Instruments is a unidirectional voltage level translator Integrated Circuit with 4 circuits and 1 channel, in a 16-TSSOP package.

The 74GTLPH16927VRG4 from Texas Instruments is a mixed-signal bidirectional translator Integrated Circuit with 1 circuit and 18 channels, in a 56-TVSOP package.

74ALVC164245DLRG4 from Texas Instruments is a Integrated Circuit 16-Bit 2.5-V to 3.3-V/3.3-V To 5-V Level Shifting Transceiver With 3-State Outputs - Voltage translators. This 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails. B port has V CCB, which is set to operate at 3.3 V and 5 V. A port has V CCA, which is set to operate at 2.5 V and 3.3 V. This allows for translation from a 2.5-V to a 3.3-V environment, and vice versa, or from a 3.3-V to a 5-V environment, and vice versa. The SN74ALVC164245 is designed for asynchronous communication between data buses. The control circuitry (1DIR, 2DIR, 1 OE, and 2 OE) is powered by V CCA. To ensure the high-impedance state during power up or power down, the output-enable (OE) input should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ.

The 74AVCB164245GRE4 from Texas Instruments is a bidirectional voltage level translator with 2 circuits and 8 channels, in a 48-TSSOP package.

74ALVC164245DLG4 from Texas Instruments is a Integrated Circuit 16-Bit 2.5-V to 3.3-V/3.3-V To 5-V Level Shifting Transceiver With 3-State Outputs - Voltage translators. This 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails. B port has V CCB, which is set to operate at 3.3 V and 5 V. A port has V CCA, which is set to operate at 2.5 V and 3.3 V. This allows for translation from a 2.5-V to a 3.3-V environment, and vice versa, or from a 3.3-V to a 5-V environment, and vice versa. The SN74ALVC164245 is designed for asynchronous communication between data buses. The control circuitry (1DIR, 2DIR, 1 OE, and 2 OE) is powered by V CCA. To ensure the high-impedance state during power up or power down, the output-enable (OE) input should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The logic levels of the direction-control (DIR) input and the output-enable (OE) input activate either the B-port outputs or the A-port outputs or place both output ports into the high-impedance mode. The device transmits data from the A bus to the B bus when the B-port outputs are activated, and from the B bus to the A bus when the A-port outputs are activated. The input circuitry on both A and B ports always is active and must have a logic HIGH or LOW level applied to prevent excess I CC and I CCZ.

The 74AVCAH164245GRE4 from Texas Instruments is a bidirectional translator Integrated Circuit in a 48-TSSOP package.

The 74GTLP1395DGVRG4 from Texas Instruments is a bidirectional mixed-signal translator with 2 circuits and 1 channel, in a 20-TVSOP package.

The CD4504BMG4 from Texas Instruments is a unidirectional voltage level translator Integrated Circuit with 1 circuit and 6 channels, in a 16-SOIC package.

The MC10H352P from onsemi is a unidirectional mixed-signal translator Integrated Circuit with 1 circuit and 4 channels, in a 20-PDIP package.

The MC100EP91DWR2G from onsemi is a mixed-signal unidirectional translator with 1 circuit and 3 channels, in a 20-SOIC package.

The MC10H601FNR2G from onsemi is a unidirectional mixed-signal translator Integrated Circuit with 1 circuit and 9 channels, in a 28-PLCC (11.51x11.51) package.

The MC10H124M from onsemi is a unidirectional mixed-signal translator Integrated Circuit with 1 circuit and 4 channels, supplied in a 16-SOEIAJ package.

The MC10EPT20MNR4G from onsemi is a unidirectional mixed-signal translator with 1 circuit and 1 channel, in an 8-DFN (2x2) package.

The MC100H604FNG from onsemi is a unidirectional mixed-signal translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The MC100H600FNR2 from onsemi is a unidirectional mixed-signal translator Integrated Circuit with 1 circuit and 9 channels, in a 28-PLCC (11.51x11.51) package.

The MC10H606FNR2 from onsemi is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The MC10H125L from onsemi is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 4 channels, in a 16-CDIP package.

The NLSV22T244MUTAG from onsemi is a unidirectional voltage level translator Integrated Circuit with 2 circuits and 2 channels, in a 12-UQFN (1.7x2) package.

The MC100H605FNR2G from onsemi is a unidirectional mixed-signal translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The ISL3036EIRZ-TK from Elantec is a bidirectional voltage level translator with 1 circuit and 4 channels, rated at 100Mbps, in a 14-QFN (3.5x3.5) package.

The MAX3371ELT+ from Analog Devices Inc./Maxim Integrated is a bidirectional level translator Integrated Circuit in a 6-UDFN package.

The MC10H351FNR2G from Fairchild Semiconductor is a unidirectional mixed-signal translator with 1 circuit and 4 channels, in a 20-PLCC (9x9) package.

The 100325SCX from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 6 channels, in a 24-SOP package.

The 100324QC from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The 100325QC from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The 100324QCX from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The 100325QI from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 6 channels, in a 28-PLCC (11.51x11.51) package.

The 100395QCX from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 9 channels, in a 28-PLCC (11.51x11.51) package.

The 100395QC from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 9 channels, in a 28-PLCC (11.51x11.51) package.

The 100LVELT22MX from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 2 channels, in an 8-SOIC package.

The 100ELT22MX from Fairchild Semiconductor is a mixed-signal unidirectional translator Integrated Circuit with 1 circuit and 2 channels, in an 8-SOIC package.