Search results for “74FCT162”

The 74FCT162H501ETPVC from Texas Instruments is an FCT-series bus transceiver Integrated Circuit.

The 74FCT162H952ETPACT from Texas Instruments is an FCT series bus transceiver Integrated Circuit with element, bit-per-element and output attributes.

74FCT162H501CTPACT from Texas Instruments is a Integrated Circuit 18-Bit Universal Bus Transceivers with Bus-Hold and 3-State Outputs - General-purpose transceivers. These 18-bit universal bus transceivers can be operated in transparent, latched or clock modes by combining D-type latches and D-type flip-flops. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock inputs (CLKAB and CLKBA). For A-to-B data flow, the device operates in transparent mode when LEAB is HIGH. When LEAB is LOW, the A data is latched if CLKAB is held at a HIGH or LOWlogic level. If LEAB is LOW, the A bus data is stored in the latch/flip-flop on the LOW-to-HIGH transition of CLKAB. OEAB performs the output enable function on the B port. Data flow from B-to-A is similar to that of A-to-B and is controlled by OEBA, LEBA, and CLKBA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The CY74FCT16501T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The CY74FCT162501T has 24-mA balanced output drivers with current limiting resistors in the outputs. This reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162501T is ideal for driving transmission lines. The CY74FCT162H501T is a 24-mA balanced output part, that has "bus hold" on the data inputs. The device retains the inputx92s last state whenever the input goes to high impedance. This eliminates the need for pull-up/down resistors and prevents floating inputs.

The 74FCT162373ATPACT from Texas Instruments is a D-type transparent latch Integrated Circuit with 2 channels in an 8:8 configuration and tri-state outputs, in a 48-TSSOP package.

The 74FCT162H245ATPACT from Texas Instruments is a non-inverting transceiver Integrated Circuit with 2 elements, 8 bits per element and 3-state output, rated to 5.5 V, in a 48-TSSOP package.

The 74FCT162H244ATPACT from Texas Instruments is a non-inverting buffer Integrated Circuit with 4 elements, 4 bits per element and 3-state output, rated 5.5 V, in a 48-TSSOP package.

The 74FCT162H952ETPAC from Texas Instruments is an FCT series bus transceiver Integrated Circuit.

The 74FCT162H245ATPAC from Texas Instruments is an FCT Series bus transceiver with 2-function and Element Bit per Element Output specification.

The 74FCT162H245CTPACT from Texas Instruments is a non-inverting transceiver Integrated Circuit rated to 5.5 V, with 2 elements of 8 bits each, 3-state outputs and a 48-TSSOP package.

74FCT162501CTPVCT from Texas Instruments is a Integrated Circuit 18-Bit Universal Bus Transceivers with 3-State Outputs - General-purpose transceivers. These 18-bit universal bus transceivers can be operated in transparent, latched or clock modes by combining D-type latches and D-type flip-flops. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock inputs (CLKAB and CLKBA). For A-to-B data flow, the device operates in transparent mode when LEAB is HIGH. When LEAB is LOW, the A data is latched if CLKAB is held at a HIGH or LOWlogic level. If LEAB is LOW, the A bus data is stored in the latch/flip-flop on the LOW-to-HIGH transition of CLKAB. OEAB performs the output enable function on the B port. Data flow from B-to-A is similar to that of A-to-B and is controlled by OEBA, LEBA, and CLKBA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The CY74FCT16501T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The CY74FCT162501T has 24-mA balanced output drivers with current limiting resistors in the outputs. This reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162501T is ideal for driving transmission lines. The CY74FCT162H501T is a 24-mA balanced output part, that has "bus hold" on the data inputs. The device retains the inputx92s last state whenever the input goes to high impedance. This eliminates the need for pull-up/down resistors and prevents floating inputs.

The 74FCT162H244ATPAC from Texas Instruments is a 4-bit bus driver Integrated Circuit.

The 74FCT162373CTPAG from IDT, Integrated Device Technology Inc is a FAST CMOS 16-bit D-type transparent latch Integrated Circuit with 2 channels, an 8:8 configuration and tri-state outputs, in a 48-TSSOP package.

The 74FCT162H245CTPAC from Cypress Semiconductor Corp is a 16-bit transceiver Integrated Circuit (N) with per-element outputs.

74FCT162501ATPVCT from Texas Instruments is a Integrated Circuit 18-Bit Universal Bus Transceivers with 3-State Outputs - General-purpose transceivers. These 18-bit universal bus transceivers can be operated in transparent, latched or clock modes by combining D-type latches and D-type flip-flops. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock inputs (CLKAB and CLKBA). For A-to-B data flow, the device operates in transparent mode when LEAB is HIGH. When LEAB is LOW, the A data is latched if CLKAB is held at a HIGH or LOWlogic level. If LEAB is LOW, the A bus data is stored in the latch/flip-flop on the LOW-to-HIGH transition of CLKAB. OEAB performs the output enable function on the B port. Data flow from B-to-A is similar to that of A-to-B and is controlled by OEBA, LEBA, and CLKBA. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The CY74FCT16501T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The CY74FCT162501T has 24-mA balanced output drivers with current limiting resistors in the outputs. This reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162501T is ideal for driving transmission lines. The CY74FCT162H501T is a 24-mA balanced output part, that has "bus hold" on the data inputs. The device retains the inputx92s last state whenever the input goes to high impedance. This eliminates the need for pull-up/down resistors and prevents floating inputs.

74FCT162652CTPACT from Texas Instruments is a Integrated Circuit 16-Bit Bus Transceivers and Registers with 3-State Outputs - General-purpose transceivers. These 16-bit, high-speed, low-power, registered transceivers that are organized as two independent 8-bit bus transceivers with three-state D-type registers and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal storage registers. OEAB and OEBA control pins are provided to control the transceiver functions. SAB and SBA control pins are provided to select either real-time or stored data transfer. Data on the A or B data bus, or both, can be stored in the internal D flip-flops by LOW-to-HIGH transitions at the appropriate clock pins (CLKAB or CLKBA), regardless of the select or enable control pins. When SAB and SBA are in the real-time transfer mode, it is also possible to store data without using the internal D-type flip-flops by simultaneously enabling OEAB and OEBA. In this configuration, each output reinforces its input. Thus, when all other data sources to the two sets of bus lines are at high impedance, each set of bus lines will remain at its last state. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The CY74FCT16652T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The CY74FCT162652T has 24-mA balanced output drivers with current-limiting resistors in the outputs. This reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162652T is ideal for driving transmission lines.

The 74FCT162646ETPVCT from Texas Instruments is an FCT-series bus transceiver Integrated Circuit.

The 74FCT162373ATPAG8 from IDT, Integrated Device Technology Inc is a FAST CMOS 16-bit D-type transparent latch Integrated Circuit with 2 channels, an 8:8 configuration and tri-state outputs, in a 48-TSSOP package.

The 74FCT162373ETPAG from IDT, Integrated Device Technology Inc is a FAST CMOS 16-bit D-type transparent latch Integrated Circuit with 2 channels, an 8:8 configuration and tri-state outputs, in a 48-TSSOP package.

The 74FCT16245TPV from IDT, Integrated Device Technology Inc is a 16-bit bidirectional transceiver Integrated Circuit.

The 74FCT162373ETPVG from IDT, Integrated Device Technology Inc is a FAST CMOS 16-bit D-type transparent latch Integrated Circuit with 2 channels, an 8:8 configuration and tri-state outputs, in a 48-SSOP package.

The 74FCT162501ETPACT from Cypress Semiconductor Corp is an 18-bit universal bus transceiver from the FCT series, in a 56-TSSOP package.

The 74FCT162501CTPVG from IDT, Integrated Device Technology Inc is an 18-bit registered universal bus transceiver Integrated Circuit in a 56-SSOP package.

74FCT162374CTPVCT from Texas Instruments is a Integrated Circuit 16-Bit Edge-Triggered D-Type Flip-Flops with 3-State Output - D-type flip-flops. CY74FCT16374T and CY74FCT162374T are 16-bit D-type registers designed for use as buffered registers in high-speed, low power bus applications. These devices can be used as two independent 8-bit registers or as a single 16-bit register by connecting the output Enable (OE) and Clock (CLK) inputs. Flow-through pinout and small shrink packaging aid in simplifying board layout. This device is fully specified for partial-power-down applications using I off. The I off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The CY74FCT16374T is ideally suited for driving high-capacitance loads and low-impedance backplanes. The CY74FCT162374T has 24-mA balanced output drivers with current limiting resistors in the outputs. This reduces the need for external terminating resistors and provides for minimal undershoot and reduced ground bounce. The CY74FCT162374T is ideal for driving transmission lines.

The 74FCT162373ATPVG from IDT, Integrated Device Technology Inc is a FAST CMOS 16-bit D-type transparent latch Integrated Circuit with 2 channels, an 8:8 configuration and tri-state outputs, in a 48-SSOP package.