Smart Prototyping

The ZIO-101930 from Smart Prototyping is a Qwiic ambient light sensor module based on the TSL2561, with IR optical sensing and I²C interface.

The ZIO-101933 from Smart Prototyping is a Qwiic gas sensor module based on the CCS811, with a flammable gas sensor and voltage output.

The ZIO-101917 from Smart Prototyping is an open-frame DC-DC converter with a 5 to 12.5 V output and 10 V input.

The ZIO-101955 from Smart Prototyping is a Qwiic NEO-M8N-0-10 GPS Radio Frequency receiver.

The ZIO-101924 from Smart Prototyping is a real-time clock (RTC) Integrated Circuit with clock/calendar function and an I²C module.

The CR-102116 from Smart Prototyping is a shielded male-to-male DisplayPort cable assembly, 10.0 ft (3.05 m) long.

The ZIO-101962 from Smart Prototyping is an air dust sensor module that measures PM1.0, PM2.5 and PM10 particulate matter, based on the PMSA003I sensor.

The ZIO-102115 from Smart Prototyping is a black 4-position ZIO Qwiic JST connector.

The CR-101952 from Smart Prototyping is a BOE TFT LCD module, VS035ZSM-NW0, 3.5.

The ZIO-101968 from Smart Prototyping is a ZIO Qwiic NRF52840 development board with a Bluetooth v5.0/4.3 transceiver module for Bluetooth and general ISM below 1 GHz, with no antenna included and through-hole mounting.

The ZIO-101940 from Smart Prototyping is a ZIO Qwiic LoRa development board with a general ISM, below 1 GHz, LoRa transceiver module operating at 420 MHz to 450 MHz, in a through-hole mount.

The ZIO-101934 from Smart Prototyping is a ZIO nRF52832 Qwiic development board with a Bluetooth v5.0/4.2 transceiver module for general ISM, below 1 GHz, use, with antenna not included and a through-hole mount.

The ZIO-101966 from Smart Prototyping is a general ISM sub-1 GHz LoRa transceiver module operating at 915 MHz, with through-hole mounting.

The ZIO-101890 from Smart Prototyping is a Qwiic HC-SR04 ultrasonic sensor with a 2-400 cm range.

The ZIO-101956 from Smart Prototyping is a general ISM LoRa transceiver module below 1 GHz covering 420 MHz to 450 MHz, in a through-hole package with an I2C interface.

The ZIO-101964 from Smart Prototyping is a ZIO Qwiic PAJ7620U2 module.

The ZIO-101897 from Smart Prototyping is a ZIO 4 DC motor controller module.

The ZIO-101926 from Smart Prototyping is a Qwiic sensor module with an SHT31 humidity and temperature sensor, measuring 0 to 100% RH with ±2% RH accuracy, an I²C interface and a 10 s response time, in a through-hole format.

The ZIO-101932 from Smart Prototyping is a ZIO Qwiic RGB LED module with APA102 LEDs.

The ZIO-101901 from Smart Prototyping is a 16-channel I/O expander Integrated Circuit with an I2C interface operating at 400 kHz.

The ZIO-101898 from Smart Prototyping is a ZIO Qwiic hub board.

The ZIO-101905 from Smart Prototyping is a ZIO rotary encoder sensor.

The ZIO-101947 from Smart Prototyping is an open-style battery holder for 4 AA cells.